白书战

2026

基于模糊神经网络PID的质子交换膜燃料电池温度控制策略

《内燃机与动力装置》

DOI

2026

燃料电池整车能量管理策略设计及实验研究

《实验技术与管理》

DOI

2026

质子交换膜燃料电池极化曲线特性仿真及软件开发

《内燃机与动力装置》

2026

柴油机SCR低温解冻实验教学系统设计与研发

《实验科学与技术》

2026

重型商用车氢内燃机增压技术挑战及发展趋势

《内燃机与动力装置》

DOI

2026

针对低温环境的尿素系统控制实验教学设备设计

《实验室科学》

2026

Adaptive-weight model predictive control for online energy management of fuel cell heavy-duty trucks based on the soft actor-critic algorithm

Energy

DOI

2025

增程式矿卡动力系统匹配及策略优化

《内燃机与动力装置》

DOI

2025

商用车氢燃料电池混合动力系统评估模型构建

《内燃机与动力装置》

DOI

2025

钢带间距对质子交换膜燃料电池堆封装力的影响

《内燃机与动力装置》

DOI

2025

液压油物性参数对柱塞副润滑特性的影响

《内燃机与动力装置》

DOI

2025

柴油机限压阀故障诊断模型的研究及应用

《内燃机》

DOI

2025

适用于紧凑SOFC的燃烧器耦合换热器实验

《吉林大学学报(工学版)》

DOI

2025

尿素喷射策略对柴油机排放性能影响的试验研究

《内燃机与动力装置》

DOI

2025

能源与动力工程专业实验教学体系分析与探索

《高教学刊》

DOI

2025

正流量挖掘机工况分析及控制策略研究

《液压与气动》

2025

Numerical studies on a novel air path design featured with the sequential turbocharging and the low-pressure exhaust gas recirculation for the marine two-stroke engine fulfilling the IMO Tier Ⅲ regulation

Energy

DOI

2025

Parametric study on a novel steam injected inverted Brayton cycle system recovering waste heat from the internal combustion engine

Applied Thermal Engineering

DOI

2025

Diesel Engine Urea Injection Optimization Based on the Crested Porcupine Optimizer and Genetic Algorithm

Applied Sciences

DOI

2024

重型柴油机后处理电加热技术研究

《内燃机与动力装置》

2024

燃料电池发动机供氢系统设计与分析

《内燃机与动力装置》

2024

增压柴油机蒸汽喷注余热回收系统试验研究

《内燃机与动力装置》

2024

某船用发电辅机性能优化

《内燃机与动力装置》

2024

转速和高压共轨燃油系统参数对共轨管压力波动的影响

《内燃机与动力装置》

2024

燃料电池极板过渡区结构的优化设计

《内燃机与动力装置》

2024

工作条件对质子交换膜燃料电池性能的影响

《内燃机与动力装置》

2024

某柴油机尾气后处理装置空速计算方法

《内燃机与动力装置》

2024

基于流-固耦合的后处理系统热管理仿真分析

《内燃机与动力装置》

2024

A Simulation Study on Urea Maldistribution and Implications for NOx Reduction with a Multi-Channel Modelling Approach

Applied Sciences

DOI

2024

Investigation of the Influence of Lubricating Oil Viscosity on the Wear-Reducing Characteristics of Cylinder Liner Surface Texture

Applied Sciences

DOI

2024

Characterization of pressure oscillations and combustion noise of hydrogen reactivity-controlled compression ignition (RCCI)

International Journal of Hydrogen Energy

DOI

2024

Design of a combined organic Rankine cycle and turbo-compounding system recovering multigrade waste heat from a marine two-stroke engine

Energy

DOI

2024

Erratum: Experimental Study on the Diesel Injection Pressure of Homogeneous Charge Induced Ignition for Multi-cylinder Operation

International Journal of Automotive Technology

DOI

2024

Multi-mode operation of a novel dual-pressure steam rankine cycle system recovering multi-grade waste heat from a marine two-stroke engine equipped with the high-pressure exhaust gas recirculation system

Energy

DOI

2024

Effects of Fuel Cell Size and Dynamic Limitations on the Durability and Efficiency of Fuel Cell Hybrid Electric Vehicles under Driving Conditions

Applied Sciences

DOI

2024

Influence of Liner Surface with Parameterized Pit Texture on the Friction Characteristics of Piston Rings

Processes

DOI

2024

Insight into the combustion and emission performance of reactivity-controlled compression ignition (RCCI) fueled with hydrogen (H2) and polyoxymethylene dimethyl ethers (PODEn)

International Journal of Hydrogen Energy

DOI

2024

A study on urea deposition performance based on a new mixer design in diesel after-treatment system

Process Safety and Environmental Protection

DOI

2024

Study on Urea Crystallization Risk Assessment and Influencing Factors in After-Treatment System of Diesel Engines

Applied Sciences

DOI

2024

Improvement of Blocked Long-Straight Flow Channels in Proton Exchange Membrane Fuel Cells Using CFD Modeling, Artificial Neural Network, and Genetic Algorithm

Applied Sciences

DOI

2023

柴油机DPF再生技术的研究进展

《内燃机与动力装置》

2023

重型柴油机DPF非线性非稳态碳载量估算方法研究

《车用发动机》

2023

活塞环和气缸套表面形貌对润滑性能的影响

《车用发动机》

2023

流道宽度和脊宽度对燃料电池极板流通特性的影响

《内燃机与动力装置》

2023

某船用柴油机低速性能优化

《内燃机与动力装置》

2023

高性能商用车用散热器轻量化设计

《内燃机与动力装置》

2023

急降怠速工况下DPF主动再生温度特性试验研究

《内燃机与动力装置》

2023

基于热-机耦合的燃料电池极板结构优化

《内燃机与动力装置》

2023

大排量轴向柱塞泵柱塞副润滑特性分析

《液压与气动》

2023

A new transient NOx prediction model for diesel engine based on neural network model with Pelican Optimization Algorithm

International Journal of Engine Research

DOI

2023

Thermal Management of Diesel Engine Aftertreatment System Based on Ultra-Low Nitrogen Oxides Emission

Applied Sciences

DOI

2023

Numerical studies on the flow characteristic of the marine two-stroke engine integrated with the high-pressure exhaust gas recirculation system

Case Studies in Thermal Engineering

DOI

2023

Research on ECMS Based on Segmented Path Braking Energy Recovery in a Fuel Cell Vehicle

Energy Engineering

DOI

2023

Thermohydrodynamic Lubrication Characteristics of Piston Rings in Diesel Engine Considering Transient Heat Transfer under the Parameterized Surface Texture of Cylinder Liners

Energies

DOI

2023

Analysis of the Influence of Geometrical Parameters on the Performance of a Proton Exchange Membrane Fuel Cell

Fluid dynamics & materials processing

DOI

2023

Experimental Study on Gas Flow Uniformity in a Diesel Particulate Filter Carrier

Fluid dynamics & materials processing

DOI

2023

Optimization of Cooling Channel Structure of Bipolar Plate for Proton Exchange Membrane Fuel Cells Based on CFD Analysis

Energies

DOI

2023

Optimization Design of a Parallel Flow Field for PEMFC with Bosses in Flow Channels

Energies

DOI

2023

Simulation and Control Strategy Study of the Hydrogen Supply System of a Fuel Cell Engine

Energies

DOI

2023

Comprehensive Experimental and Numerical Optimization of Diesel Engine Thermal Management Strategy for Emission Clarification and Carbon Dioxide Control

Processes

DOI

2023

Study on urea deposits risk of after-treatment system based on deposits boundary method

Energy

DOI

2023

Optimization of a Diesel Injector Nozzle

Fluid dynamics & materials processing

DOI

2022

非道路柴油机后处理系统SCR喷嘴座结构优化

《内燃机学报》

2022

增程式混动汽车冷却系统控制策略

《内燃机与动力装置》

2022

柴油机连杆小头衬套磨损仿真及改进

《内燃机与动力装置》

2022

柴油机电控喷油器瞬态响应分析及结构优化

《内燃机与动力装置》

2022

永磁同步电机齿槽转矩的优化分析

《防爆电机》

2022

CFD-Based Optimization of a Diesel Engine Waste Heat Recycle System

Fluid dynamics & materials processing

DOI

2022

Influence of ambient conditions on the marine two-stroke engine integrated with a bottoming Rankine cycle system: Energy and exergy analyses

Applied Thermal Engineering

DOI

2022

Experimental study on the performance and diagnosis of hydrothermally aged selective catalytic reduction over a copper-based catalyst

Process Safety and Environmental Protection

DOI

2022

The Characteristics of a Novel After-Burner Used for Metal-Supported Planar SOFC System

Journal of Electrochemical Energy Conversion and Storage

DOI

2022

Influence of Off Gas Recirculation on the Intermediate Temperature SOFC With Partial Oxidation Reformer

Journal of Electrochemical Energy Conversion and Storage

DOI

2022

Influence of Urea Uneven Injection on the Performances of a Diesel Engine

Fluid dynamics & materials processing

DOI

2022

Evolution of unregulated hydrocarbons distribution with different post injection strategies in a common-rail diesel engine

Thermal Science and Engineering Progress

DOI

2022

Uniformity Improvement on Back-Disk Impingement Cooling Preference of a Radical Turbine with Optimized Distribution Strategies of Jet-Holes

International Journal of Automotive Technology

DOI

2022

Thermodynamic and techno-economic comparisons of the steam injected turbocompounding system with conventional steam Rankine cycle systems in recovering waste heat from the marine two-stroke engine

Energy

DOI

2022

Study on a near-zero emission SOFC-based multi-generation system combined with organic Rankine cycle and transcritical CO2 cycle for LNG cold energy recovery

Energy Conversion and Management

DOI

2022

A Novel Method for the Application of the ECMS (Equivalent Consumption Minimization Strategy) to Reduce Hydrogen Consumption in Fuel Cell Hybrid Electric Vehicles

Fluid dynamics & materials processing

DOI

2021

轻便轴承对增压器机械效率及发动机加速性能的影响

《内燃机与动力装置》

DOI

2021

车用燃料电池专用空压机的现状分析

《压缩机技术》

DOI

2021

行业学会协调下的“产学研管用”深度融合的实习教学研究与实践

《大学教育》

2021

Experimental Analysis of the Influence of Exhaust Thermal Management on Engine NOx Emission

Fluid dynamics & materials processing

DOI

2021

Evolution Mechanism of N2O for the Selective Catalytic Reduction of NOx by NH3 Over Cu-SSZ-13 Assisted Fe-BEA Catalysts

Catalysis Letters

DOI

2021

WITHDRAWN: Experimental study on a new catalytic heat exchanger suitable for solid oxide fuel cell thermal management system

International Journal of Hydrogen Energy

DOI

2021

An anti-crystallization design of selective catalytic reduction nozzle holder

Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering

DOI

2021

A study on the high-efficiency mixer of the SCR system

Mechanics & Industry

DOI

2021

Diesel engine waste heat recovery system comprehensive optimization based on system and heat exchanger simulation

Open Physics

DOI

2021

Investigation on subcooled flow boiling heat transfer characteristics in ICE-like conditions

Open Physics

DOI

2021

Assessment of the Application of Subcooled Fluid Boiling to Diesel Engines for Heat Transfer Enhancement

Fluid dynamics & materials processing

DOI

2020

基于热-机耦合仿真的柴油机气门与座圈接触面滑移分析

《内燃机与动力装置》

DOI

2020

弯管进气对离心压气机效率的影响

《内燃机与动力装置》

DOI

2020

预旋角对径流涡轮背盘射流冷却的影响

《动力工程学报》

DOI

2020

带导流板弯管进气对高压级压气机效率影响的研究

《汽车与新动力》

DOI

2020

微型燃气轮机涡轮背盘冲击冷却特性研究

《热科学与技术》

DOI

2020

Optimization of SCR inflow uniformity based on CFD simulation

Open Physics

DOI

2020

Research on Liquid Water Distribution in PEMFC Cathode Porous Media

International Journal of Electrochemical Science

DOI

2020

Three-dimensional multi-phase simulation of cooling patterns for proton exchange membrane fuel cell based on a modified Bruggeman equation

Applied Thermal Engineering

DOI

2020

Influence of Diesel Engine Intake Throttle and Late Post Injection Process on the Rise of Temperature in the Diesel Oxidation Catalyst

Fluid dynamics & materials processing

DOI

2019

DOC+DPF+SCR后处理系统对小型柴油机性能及排放的影响

《内燃机与动力装置》

DOI

2019

混合燃烧时汽油含量对发动机燃烧和排放的影响

《内燃机与动力装置》

DOI

2019

某柴油机活塞与缸套间极限工作间隙仿真研究

《内燃机与动力装置》

DOI

2019

斜盘式轴向液压柱塞泵流量脉动特性分析

《内燃机与动力装置》

DOI

2019

燃料电池多通道蛇形流场的设计及优化

《内燃机与动力装置》

DOI

2019

涡轮增压器涡轮轴向气动力分析

《内燃机与配件》

2019

基于有限元的某柴油机主轴承壁结构优化

《内燃机与动力装置》

DOI

2019

考虑加热面粗糙度和材料的沸腾换热修正模型

《吉林大学学报(工学版)》

DOI

2019

Numerical investigation of thermo-hydraulic performance of an opposed piston opposed cylinder engine water jacket with helical fins

Applied Thermal Engineering

DOI

2018

柴油机润滑系统仿真计算与分析

《内燃机与动力装置》

2018

重型柴油机SCR催化器优化设计和试验研究

《车用发动机》

2018

考虑凸轮轴变形的配气机构动力学分析

《车用发动机》

2018

Experimental investigation of exhaust thermal management on NOx emissions of heavy-duty diesel engine under the world Harmonized transient cycle (WHTC)

Applied Thermal Engineering

DOI

2018

Influence of the idle-up strategy on the thermal management of diesel particulate filter regeneration during a drop to the idle process

Applied Thermal Engineering

DOI

2017

混合动力汽车动力总成试验台设计与开发

《山东大学学报(工学版)》

2017

Urea-SCR系统尿素结晶现象分析及解决方案

《山东大学学报(工学版)》

2017

某发动机气门落座力的优化

《现代制造技术与装备》

2017

不同转速下某发动机配气机构全阀系动力学仿真

《现代制造技术与装备》

2017

Influence of active control strategies on exhaust thermal management for diesel particular filter active regeneration

Applied Thermal Engineering

DOI

2016

基于聚类和马尔可夫链的公交车典型行驶工况构建

《中国公路学报》

2016

基于动态规划的自适应等效最小燃油消耗策略

《华南理工大学学报(自然科学版)》

2016

Soot loading estimation model and passive regeneration characteristics of DPF system for heavy-duty engine

Applied Thermal Engineering

DOI

2015

基于CFD投影的柴油机缸盖温度场模拟分析

《内燃机与动力装置》

2015

DOC/POC/SCR组合后处理技术在非电控柴油机排放上的应用研究

《内燃机工程》

2015

考虑沸腾换热的柴油机缸盖冷却水腔结构优化

《内燃机与动力装置》

2015

某船舶用柴油机配气机构仿真分析

《内燃机与动力装置》

2015

考虑沸腾换热的柴油机缸盖流固耦合传热分析

《农业装备与车辆工程》

2015

考虑空穴和微观弹流润滑效应的连杆大头轴承热弹流混合润滑分析

《上海交通大学学报》

2015

基于CFD的某船用柴油机燃烧系统优化匹配

《内燃机与动力装置》

2015

基于总应变能的多轴疲劳模型研究

《船舶力学》

2015

基于试验测量的瞬时行驶工况构建

《吉林大学学报(工学版)》

2015

基于能量回收的等效燃油消耗最小策略

《华南理工大学学报(自然科学版)》

2014

柴油机尿素SCR系统的钒基催化剂老化性能研究

《内燃机工程》

2014

一种适用于柴油机结构温度场计算的缸内传热模型

《上海交通大学学报》

2014

陶瓷基POC应用于柴油机后处理系统的试验研究

《车用发动机》

2014

基于应变-寿命理论的曲轴疲劳分析研究

《内燃机工程》

2013

基于模块化的高强度柴油机机体组件强度分析

《内燃机与动力装置》

2012

基于激光诱导磷光测试技术的发动机缸内燃烧温度测试

《红外与激光工程》

2012

基于CAE和单缸机试验的大功率发动机整机性能开发

《内燃机学报》

2012

预燃室参数对大缸径天然气发动机燃烧过程影响的研究

《内燃机工程》

2010

激光诱导磷光测温技术在缸内温度测量中的应用

《燃烧科学与技术》

2010

关于柴油机压缩终了湍流运动规律的研究

《内燃机与动力装置》

2010

气门开启过程对压缩终了缸内涡流运动的影响

《车用发动机》

2009

侧向换气发动机分层和均质燃烧的试验研究

《车用发动机》

2009

基于激光诱导光谱技术的发动机缸内燃料浓度和温度分布的试验研究

《山东大学》

2009

A homogeneous flow model for boiling heat transfer calculation based on single phase flow

Energy Conversion and Management

DOI

2009

Experiment Study of Stratified Combustion at Different Boost Pressure

Asia-Pacific Power and Energy Engineering Conference (APPEEC)

DOI

2008

基于CFD的柴油机气缸体冷却水腔改进设计

《农业机械学报》

2008

汽油机与加热器联合运行降低冷起动阶段排放水平的试验研究

《内燃机工程》

2008

一种适用于缸盖水腔沸腾传热计算的模型

《内燃机学报》

2008

A New Single Phase Boiling Model for Heat Transfer Calculation of Cooling Water-Jacket in Cylinder Head

Transactions of Csice

2007

基于振动测试的发动机高压油管断裂问题分析

《内燃机与动力装置》

2007

利用有限元对6200柴油机功率提升前后缸盖强度的对比分析

《山东交通学院学报》

2007

Comparative FEM Analysis for the Intensity of Cylinder Head of 6200 Diesel Engine During the Power Increasing Process

Journal of Shandong Jiaotong University

2006

车用发动机高压油管振动分析与控制

《车用发动机》

2006

声强法在柴油机表面辐射噪声源识别中的应用

《计量学报》

2006

柴油机高强度缸盖螺栓强度校核方法研究

《柴油机》

2006

船用柴油机表面噪声源识别分析

《船舶工程》

2005

基于神经网络的排气消声器的优化设计方法

《农业机械学报》

2005

发动机局部振动和噪声控制

《山东大学》

2004

尺寸链在配气机构动力学计算中的应用

《柴油机》

2004

活塞膨胀对配气机构的影响

《内燃机与动力装置》

2002

小型柴油机排气消声器的设计

《内燃机与动力装置》

2007

加热器与汽油机联合运行降低汽油机冷起动排放的实验研究

《山东汽车工程学会第九次学术年会优秀论文集》