百晓学者学者目录

马品奎

副教授、副研究员、教授、研究员、讲师，吉林大学

精选作品

期刊论文

2026

Mg-Al-Sn合金力学性能与耐蚀性协同强化机制（英文）

王大为，周瑞，杨亚杰，董小锐，贾海龙，马品奎，徐进，山泉，李祖来，符金柱，查敏

Transactions of Nonferrous Metals Society of China

2026

不同人工时效处理对挤压低含量Mg-Al-Ca-Mn合金拉伸蠕变行为的影响（英文）

李明宇，管志平，宋家旺，贾红杰，马品奎，王刚，闫巍，王明辉，李志刚

Transactions of Nonferrous Metals Society of China

2026

Mn添加对T6态Al-Si-Mg合金显微组织、力学性能和腐蚀行为的影响（英文）

徐善良，贾海龙，王大为，查敏，宋家旺，周晓丽，马品奎

Transactions of Nonferrous Metals Society of China

2026

Improved mechanical properties of rolled Al-Cu alloys by Sc addition and low temperature aging: Microstructures and precipitation behaviors

Hai-Long Jia, Ming Yang, Wen-Qiang Zhou, Pin-Kui Ma, Dan Gao, Zhi-Zheng Yang, Min Zha

Journal of Alloys and Compounds

DOI

2026

Enhanced corrosion resistance by engineering basal-oriented grains in Mg-Al-Sn-Ca alloys to retard H/O/Cl adsorption through friction stir processing

Dong Xiao-rui, Da-Wei Wang, Rui Zhou, Wei-Chao Zhao, Pin-Kui Ma, Lei Zhao, Min Zha

Journal of Magnesium and Alloys

DOI

2026

Control of fine grain structures and strengthening-toughening mechanisms in magnesium alloys fabricated by wire-arc directed energy deposition

Wei Liu, Hai-Long Jia, Yi-hang Yang, Min Zha, Artem Marchenkov, Pin-Kui Ma, Hui-yuan Wang

China Foundry

DOI

2026

Effect of low-temperature compressed gas cooling assisted WA-DED on microstructures and mechanical properties of AZ31 Mg alloy

Yi-Hang Yang, Can Wang, Hai-Long Jia, Wei Liu, Pin-Kui Ma, Min Zha, Hui‐Yuan Wang

Materials Characterization

DOI

2026

Effects of addition of Mn on microstructure, mechanical properties and corrosion behavior of T6-treated Al-Si-Mg alloys

Shan-Liang Xu, Hai-Long Jia, Da-wei WANG, Min Zha, Jia-wang SONG, Xiao-li ZHOU, Pin-Kui Ma

Transactions of Nonferrous Metals Society of China

DOI

2025

Substantial enhancement of strength and corrosion resistance in magnesium alloy via a multi-component gradient heterostructure

Yongsen Yu, Zhiping Guan, Jun-Fu Chen, Jia-Wang Song, Pinkui Ma

Materials Research Letters

DOI

2025

Microstructures and mechanical behaviors of FSW 6082-T6 Al alloy joints

Pin-Kui Ma, De-Ping Jiang, Hailong L. Jia, Yu-Xue Zhang, Yihang Yang, Wei Liu, Jiawang Song, Min Zha

International Journal of Mechanical Sciences

DOI

2025

Metallurgical origin of dual-cracking mechanism in resistance spot welds of dissimilar aluminum alloys

Yu-Xue Zhang, Hailong L. Jia, De-Ping Jiang, Yi-Hang Yang, Wei Liu, Xiao Li Zhou, Min Zha, Wei He, Pin-Kui Ma

Journal of Materials Processing Technology

DOI

2025

Achieving grain refinement and mechanical enhancement in WA-DED AZ31 Mg alloy via AlN particle incorporation

Sheng Lu, Hailong L. Jia, Wei Liu, Yihang Yang, Min Zha, A. Yu. Marchenkov, Yue Jiang, Pin-Kui Ma, Hui‐Yuan Wang

Journal of Alloys and Compounds

DOI

2025

Atomic-scale insights into the modification mechanism of trace Bi on eutectic Mg2Si in an Al-6Mg-2Si-0.2Mn alloy

Tao Gu, Hailong L. Jia, Min Zha, Pin-Kui Ma, Jiawang Song, Yong-Fu Zhu, Hui‐Yuan Wang

Scripta Materialia

DOI

2025

Revealing microstructure–property relationships in wire‐arc DED AZ31 alloys: mechanical enhancement and corrosion behavior

Yi-Hang Yang, Hailong L. Jia, Wei Liu, A. Yu. Marchenkov, Da‐Wei Wang, Pin-Kui Ma, Min Zha, Zhiping Guan, Hui–Yuan Wang

Rare Metals

DOI

2025

A novel strategy to control degradation rate via interface solute segregation in a surface-modified AT42-xCa alloy by friction stir processing

Jinming Liu, Rui Fan, Hailong L. Jia, Da-Wei Wang, Pin-Kui Ma, Jin Qiao Xu, Min Zha

Corrosion Science

DOI

2024

轻合金大型一体化结构部件压铸成形技术研究进展

查敏，顾焘，马品奎，陈豫增，姜巨福，贾海龙，王成刚，邓彦超，李进步，王一男，宋家旺，王慧远

《特种铸造及有色合金》

2024

电弧熔丝增材AZ31镁合金组织和力学性能

马品奎，王璨，贾海龙，査敏，王慧远

《有色金属(中英文)》

2024

Fabrication of high strength-ductility Mg-3.8Al-1.1Sn-0.4Ca alloy via differential-thermal asymmetric extrusion

Yuxuan Li, Ming-Hui Wang, Jin-long Cai, Pinkui Ma, Xin-Ran Zhao, Zhigang Li

Journal of Alloys and Compounds

DOI

2024

Influence of V/B ratio and rolling treatment on the grain refinement efficacy and anti-fading ability of Al-V-B master alloys

Li-Wen Xue, Hailong L. Jia, Pin-Kui Ma, Jiawang Song, Min Zha, Hui-Yuan Wang

Materials Characterization

DOI

2024

Simultaneous enhancement in deposition efficiency and nano-scale precipitation of high-strength AZ31 Mg alloy via water cooling assisted wire-arc directed energy deposition

Pin-Kui Ma, Can Wang, Hailong L. Jia, Yihang Yang, Min Zha

Thin-Walled Structures

DOI

2024

Effects of Ca contents on microstructures and mechanical properties of friction stir processed Mg alloys

Jinming Liu, Hailong L. Jia, Siqing Wang, Pin-Kui Ma, Jin Qiao Xu, Min Zha, Hui‐Yuan Wang

Materials Science and Engineering A

DOI

2024

Tension/Compression Difference in Creep Resistances of Wrought Mg-Zn-Based Alloy with Icosahedral Quasicrystal Phases

Yu-Lei Ying, Zhiping Guan, Kai Guan, Pin-Kui Ma, Wei Yanb, Gang Wangc

Metals and Materials International

DOI

2024

Excellent synergy of formability and strength of a Mg-Zn-Y-Ca-Zr alloy by tailoring segregation-assisted weak elliptical ring texture

Ming Yang, Hailong L. Jia, Run Jiang, Xiao-Li Zhou, Pin-Kui Ma, Zhigang Li, Min Zha, Hui–Yuan Wang

Journal of Magnesium and Alloys

DOI

2024

Improved mechanical properties of Al-xMg-yZn-Cu alloys via optimized Mg/Zn ratio and thermomechanical processing

Yu-Qiao Zhao, Hailong L. Jia, Teng Tian, Tao Gu, Pin-Kui Ma, Jiawang Song, Min Zha, Hui-Yuan Wang

Materials Science and Engineering A

DOI

2024

Microstructure and mechanical properties of AT31/ATX3105 magnesium alloy composite sheets fabricated by accumulative roll bonding

Zhigang Li, Wenqi Li, Feng-Ning Liu, Pin-Kui Ma, Pei-Lin Liu, Hailong L. Jia

Journal of Materials Research and Technology

DOI

2024

Corrigendum to “Influence of Mg and Cu on precipitation behaviors and mechanical properties of Al-Si alloys” [Mater. Sci. Eng. A 908 (2024) 146775]

Li-Wen Xue, Hailong L. Jia, Pin-Kui Ma, Jiawang Song, Min Zha, Hui–Yuan Wang

Materials Science and Engineering A

DOI

2024

Influence of Mg and Cu on precipitation behaviors and mechanical properties of Al–Si alloys

Li-Wen Xue, Hailong L. Jia, Pin-Kui Ma, Jiawang Song, Min Zha, Hui–Yuan Wang

Materials Science and Engineering A

DOI

2024

The effect of B and Sb on the corrosion behavior of T6-treated Al–Si–Mg alloys

Shan-Liang Xu, Hailong L. Jia, Min Zha, Xiao-Li Zhou, Dan Gao, Pin-Kui Ma, Dawei Wang

Journal of Materials Research and Technology

DOI

2024

An innovative strategy to prepare fine-grained Mg-Al alloys with a superior strength-ductility synergy via wire-arc directed energy deposition

Yi-Hang Yang, Hailong L. Jia, Can Wang, Wei Liu, Min Zha, Pin-Kui Ma, Zhiping Guan, Hui–Yuan Wang

Additive manufacturing

DOI

2024

The effect of multi-scale second-phases on the microstructure evolution of a Mg–Al–Sn–Ca alloy during friction-stir processing

Jinming Liu, Hailong L. Jia, Jiawang Song, Xiao-Li Zhou, Dan Gao, Pin-Kui Ma, Min Zha

Journal of Materials Research and Technology

DOI

2024

Effect of Cu and Sn additions on the thermal stability of Al–Mg–Si alloy

Xian Wu, Xu Liu, Xuan Wang, Pin-Kui Ma, Zhiping Guan

Materials Science and Engineering A

DOI

2023

Investigation of enhanced strength anisotropy in an extruded Mg–Al–Ca–Mn alloy at cryogenic temperature

Mingyu Li, Zhiping Guan, Liping Liu, Hong-Jie Jia, Zhigang Li, Minghui Wang, Pin-Kui Ma, Jiawang Song

Materials Science and Engineering A

DOI

2023

Effects of Mg/Zn ratio and pre-aging on microstructure and mechanical properties of Al–Mg–Zn–Cu alloys

Yuqiao Zhao, Teng Tian, Hailong L. Jia, Pin-Kui Ma, Zhi-Zheng Yang, Jin Kai Xu, Min Zha, Hui‐Yuan Wang

Journal of Materials Research and Technology

DOI

2023

Wire arc additive manufacturing of a novel ATZM31 Mg alloy: Microstructure evolution and mechanical properties

Yi-Hang Yang, Zhiping Guan, Pin-Kui Ma, Mingwen Ren, Hailong L. Jia, Po Zhao, Min Zha, Hui‐Yuan Wang

Journal of Magnesium and Alloys

DOI

2023

Enhanced age-hardening of an Al–5Mg–2Zn–1Cu alloy by pre-aging combined with pre-straining

Yuqiao Zhao, Min Zha, Hailong L. Jia, Pin-Kui Ma, Shenbao Jin, Bo Jiang, Zhi-Zheng Yang, Hui‐Yuan Wang

Materials Science and Engineering A

DOI

2023

The effect of high solid solution Mg contents (7–13 wt%) on the dynamic strain aging behavior of Al–Mg alloys

Teng Tian, Min Zha, Hailong L. Jia, Zhen-Ming Hua, Pin-Kui Ma, Hui–Yuan Wang

Materials Science and Engineering A

DOI

2023

Towards relieving center segregation in twin-roll cast Al-Mg-Si-Cu strips by controlling the thermal-mechanical process

Shao-You Zhang, Xuan Wang, Yuan–Ting Mo, Cheng Wang, Tuo Cheng, Tuo Cheng, Orest M. Ivasishin, Pin-Kui Ma, Hui‐Yuan Wang

Journal of Material Science and Technology

DOI

2022

真空压力浸渗制备SiCp/AZ91复合材料的显微组织、力学性能和磨损行为（英文）

管志平，李明宇，夏凯欣，李志刚，高丹，赵泼，马品奎，宋家旺

Transactions of Nonferrous Metals Society of China

2022

挤压铸造Al-Si系合金成分优化、孕育变质及其复合材料的研究进展

薛利文，周文强，朴一男，赵海冬，张梦娜，贾海龙，马品奎，宋家旺，查敏，王慧远

《特种铸造及有色合金》

DOI

2022

The effect of quenching rates on microstructure and mechanical properties of an Al-Si-Cu-Mg alloy

Yi-Nan Piao, Hailong Jia, M. Zha, Pinkui Ma, Dan Gao, Chaoli Yin, Zhi-Zheng Yang, Hong Wang

Materials Characterization

DOI

2022

Microstructure, mechanical properties and wear resistance of SiCp/AZ91 composite prepared by vacuum pressure infiltration

Zhi-Ping Guan, Mingyue Li, Kaihong Xia, Zhi-Gang Li, D. Gao, Po Zhao, Pinkui Ma, Jia-Wang Song

Transactions of Nonferrous Metals Society of China

DOI

2022

Precipitation phase diffusion kinetics of AZ61 alloy under electrical pulse treatment

Hong Xu, Yupeng Wang, Zhipeng Guo, Ming Bai, Pin-Kui Ma, Guiying Wang, Xiuming Cheng

Materials Characterization

DOI

2022

Varied Modification Mechanisms of Sr and Sb Under Diverse Cooling Rates on Primary Mg2Si in an Al-20Mg2Si Alloy

C. Li, Mingqi Zhao, Hailong Jia, Cheng Wang, Pinkui Ma, M. Zha, Hong Wang

Metallurgical and Materials Transactions B

DOI

2022

Effect of minor Ca addition on microstructure and mechanical properties of a low-alloyed Mg–Al–Zn–Sn alloy

Min Zha, Shi-Chao Wang, Hailong L. Jia, Yi Yang, Pin-Kui Ma, Hui‐Yuan Wang

Materials Science and Engineering A

DOI

2022

Quasi-in-situ EBSD study of fast static recrystallization evolution of AZ61 alloy at twinning interactions during electric pulse treatment

H. Xu, M. Bai, Zhi-Peng Guo, Yu-peng Wang, Chun Wang, Pinkui Ma

Materials Characterization

DOI

2022

High-ductility AA6061 alloys produced by combination of sub-rapid solidification and Cr-alloying

Xuan Wang, Pin-Kui Ma, Shao-You Zhang, Xu Liu, Cheng Wang, Da-Wei Wang, Hui‐Yuan Wang

Journal of Materials Research and Technology

DOI

2021

挤压铸造及热处理对Al-Si系合金组织及性能的影响进展

薛利文，周文强，朴一男，赵海冬，张梦娜，贾海龙，马品奎，宋家旺，查敏，王慧远

《特种铸造及有色合金》

DOI

2021

Effect of large thickness-reduction on microstructure evolution and tensile properties of Mg-9Al-1Zn alloy processed by hard-plate rolling

Yong-Kang Li, M. Zha, J. Rong, Hailong Jia, Zhong Jin, Hong-Min Zhang, Pinkui Ma, Xu Hong, T. Feng, Hui-Yuan Wang

DOI

2021

Microstructure and Mechanical Properties of Al-Mg-Si Similar Alloy Laminates Produced by Accumulative Roll Bonding

Zhi-Gang Li, Hao Jiang, Ming-Hui Wang, Hong-Jie Jia, Hongjiang Han, Pinkui Ma

Materials

DOI

2021

Effect of trace Cr alloying on centerline segregations in sub-rapid solidified Al–Mg–Si (AA6061) alloys fabricated by twin-roll casting

Xuan Wang, Pinkui Ma, Zhaoting Meng, Shao-You Zhang, Xu Liu, Cheng Wang, Hui-Yuan Wang

DOI

2021

Effect of Short T6 Heat Treatment on the Thermal Conductivity and Mechanical Properties of Different Casting Processes Al-Si-Mg-Cu Alloys

Zhong Dong, Jin-Guo Wang, Zhi-Ping Guan, Pinkui Ma, Po Zhao, Zhu-jin Li, T. Lu, Rui-fang Yan

Metals

DOI

2021

Enhanced Electroplasticity through Room-Temperature Dynamic Recrystallization in a Mg-3Al-1Sn-1Zn Alloy

Hong Xu, Yu-Ming Zou, Yu Huang, Pinkui Ma, Zhi-peng Guo, You Zhou, Yu-peng Wang

Materials

DOI

2021

Enhanced Mechanical Properties and Isotropy of Mg-2Al-0.8Sn Alloy through Ca Addition

Y. Miao, Chao Wang, Ming-Hui Wang, H. Deng, Pinkui Ma, Zhi-Gang Li

Materials

DOI

2021

Enhanced precipitation strengthening of Mg-Al-Sn-Ca alloy by multidirectional rolling

Zhi-Gang Li, Miao M. Yuan, Fengning Liu, Pinkui Ma, Hui-Yuan Wang

DOI

2021

Refined microstructure and dispersed precipitates in a gradient rolled AZ91 alloy under pulsed current

Hong Xu, Meng Liu, Yupeng Wang, Pin-Kui Ma, Ming Bai, Bo Jiang, Zhipeng Guo, Yu-Jie Zou

Materialia

DOI

2021

Synergetic modification effects on primary Mg2Si in Al-20Mg2Si alloy induced by the co-addition of beryllium and antimony

Chao Li, Zhi Fan, Hailong L. Jia, Cheng Wang, Pin-Kui Ma, Mingwen Ren, Hui‐Yuan Wang

Journal of Alloys and Compounds

DOI

2021

Influence of Texture on the Mechanical Properties of a Mg-6Al-1Zn-0.9Sn Alloy Processed by ECAP

Xu Hong, Zhipeng Guo, Ping-Yu Zhang, You Zhou, Pin-Kui Ma

Materials

DOI

2021

Effect of complex modification of Ca and Sb on the microstructure and mechanical properties of hypoeutectic Al-11Mg2Si alloy

Chao Li, Cheng Wang, Zhi-Zheng Yang, Pin-Kui Ma, Mingwen Ren, Hui‐Yuan Wang

Journal of Alloys and Compounds

DOI

2021

Tailoring bimodal grain structure of Mg-9Al-1Zn alloy for strength-ductility synergy: Co-regulating effect from coarse Al2Y and submicron Mg17Al12 particles

Yongkang Li, Min Zha, Hailong L. Jia, Siqing Wang, Hongmin Zhang, Xiao Ma, Teng Tian, Pin-Kui Ma, Hui‐Yuan Wang

Journal of Magnesium and Alloys

DOI

2021

Balancing the strength and ductility of Mg-6Zn-0.2Ca alloy via sub-rapid solidification combined with hard-plate rolling

Zhong-Zheng Jin, Min Zha, Hailong L. Jia, Pin-Kui Ma, Siqing Wang, Jiawei Liang, Hui‐Yuan Wang

Journal of Material Science and Technology

DOI

2020

高性能挤压铸造铝合金研究进展

贾海龙，周文强，王思清，马品奎，宋家旺，查敏，王慧远

《特种铸造及有色合金》

DOI

2020

Effect of Modification with Different Contents of Sb and Sr on the Thermal Conductivity of Hypoeutectic Al-Si Alloy

Jin Xin Guo, Zhiping Guan, Ruifang Yan, Pin-Kui Ma, Ming-Hui Wang, Po Zhao, Jinguo Wang

Metals

DOI

2020

Influences of the Al3Sc particle content on the evolution of bimodal grain structure and mechanical properties of Al–Mg–Sc alloys processed by hard-plate rolling

Hongmin Zhang, Min Zha, Hailong L. Jia, Teng Tian, Xuanhe Zhang, Cheng Wang, Pin-Kui Ma, Dan Gao, Hui‐Yuan Wang

Materials Science and Engineering A

DOI

2020

Solute segregation assisted superplasticity in a low-alloyed Mg–Zn–Ca–Sn–Mn alloy

Zhen-Ming Hua, Bing-Yu Wang, Cheng Wang, Hongmin Zhang, Chunfeng Du, Yijia Li, Min Zha, Pin-Kui Ma, Zhi-Zheng Yang, Hui‐Yuan Wang

Materialia

DOI

2020

Development of low-alloyed Mg–Zn–Ca–Sn–Mn alloy with high strength-ductility synergy by sub-rapid solidification and hot rolling

Zhen-Ming Hua, Bing-Yu Wang, Cheng Wang, Chen-Yi Ma, Pin-Kui Ma, Zhiping Guan, Yijia Li, Jiasheng Li, Hui‐Yuan Wang

Journal of Alloys and Compounds

DOI

2020

Exploring the Hall-Petch relation and strengthening mechanism of bimodal-grained Mg–Al–Zn alloys

Zhong-Zheng Jin, Min Zha, Zhiyuan Yu, Pin-Kui Ma, Yongkang Li, Jinming Liu, Hailong L. Jia, Hui‐Yuan Wang

Journal of Alloys and Compounds

DOI

2020

Effect of Sb modification on microstructure and mechanical properties of hypoeutectic Al–11Mg2Si alloy

Chao Li, Cheng Wang, Pin-Kui Ma, Jin Kai Xu, Zhi-Zheng Yang, Min Zha, Jinguo Wang, Hui‐Yuan Wang

Materials Science and Engineering A

DOI

2020

Superplastic Deformation Behavior of Rolled Mg-8Al-2Sn and Mg-8Al-1Sn-1Zn Alloys at High Temperatures

Shao-You Zhang, Cheng Wang, Long-Qing Zhao, Pin-Kui Ma, Jiawang Song, Jin Xu, Xiuming Cheng, Hui‐Yuan Wang

Materials

DOI

2019

纳米增强体强化轻合金复合材料制备及构型设计研究进展与展望

王慧远，李超，李志刚，徐进，韩洪江，管志平，宋家旺，王珵，马品奎

《金属学报》

2019

Current Research and Future Prospect on the Preparation and Architecture Design of Nanomaterials Reinforced Light Metal Matrix Composites

Hui-Yuan Wang, Chao Li, Zhi-Gang Li, Jin Xu, Hongjiang Han, Zhi-Ping Guan, Jia-Wang Song, Cheng Wang, Pinkui Ma

DOI

2018

超塑性轻合金组织稳定性的研究进展及展望

王慧远，张行，徐新宇，查敏，王珵，马品奎，管志平

《金属学报》

2018

Current Research and Future Prospect on Microstructure Stability of Superplastic Light Alloys

Hui-Yuan Wang, Hang Zhang, Xinyu Xu, M. Zha, Cheng Wang, Pinkui Ma, Zhi-Ping Guan

DOI

2018

The synergy effect of fine and coarse grains on enhanced ductility of bimodal-structured Mg alloys

Hang Zhang, Hui–yuan Wang, Jinguo Wang, Jian Hua Rong, Min Zha, Cheng Wang, Pin-Kui Ma, Qi–Chuan Jiang

Journal of Alloys and Compounds

DOI

2014

超塑性自由胀形的双目立体视觉测量研究

马品奎，宋玉泉

《金属学报》

2014

Constitutive Equation with Varying Parameters for Superplastic Flow Behavior

Zhi-Ping Guan, Ming Ren, Hong-Jie Jia, Po Zhao, Pinkui Ma

Journal of materials engineering and performance (Print)

DOI

2014

Constitutive equations with varying parameters for superplastic flow behavior of Al–Zn–Mg–Zr alloy

Zhi-Ping Guan, Ming Ren, Po Zhao, Pinkui Ma, Qilong Wang

DOI

2014

Prediction of Flow Stress for Superplastic Tension Deformation

Zhi-Ping Guan, Ming Ren, Pinkui Ma, Po Zhao

DOI

2014

Quantitative Analysis of Instability for Superplastic Tension

Zhi-Ping Guan, Ming Ren, Pinkui Ma, Po Zhao

DOI

2013

超塑性自由胀形精确加载实验测量装置

宋玉泉，马品奎，管晓芳

《中国科学:技术科学》

2013

超塑性拉伸断裂分析

管志平，马品奎，宋玉泉

《金属学报》

2013

ANALYSIS OF FRACTURE DURING SUPERPLASTIC TENSION

Zhi-Ping Guan, Pinkui Ma, Yu-Quan Song

DOI

2010

超塑性非球面自由胀形的测量

宋玉泉，马品奎，管志平

《金属学报》

2006

拉伸变形应变硬化指数的理论和实验规范

宋玉泉，管志平，马品奎，宋家旺

《金属学报》

预印本

2025

Optimizing microstructures and mechanical properties of friction stir welded dissimilar THAS-1/AA6082-T6 aluminum alloys: the role of processing parameters

Yu-Xue Zhang, Hailong L. Jia, De-Ping Jiang, Yi-Hang Yang, Wei Liu, Xiaoli Zhou, Min Zha, Wei He, Pin-Kui Ma

SSRN Electronic Journal

DOI

2023

Effects of Ca Addition on Microstructure and Mechanical Properties of Mg–3.8al–1.1sn Alloys by Asymmetric Severe Shear Extrusion

Yuxuan Li, Zile Zhang, Pin-Kui Ma, Peilin Liu, Zhigang Li, Minghui Wang

SSRN Electronic Journal

DOI

研究方向

先进轻合金改性与加工

此主页由公开资料整理，尚未经学者本人认领。