梁政

期刊论文

1. Liang Zheng, Xiaodi Chen, Jianhua Liu, Cunbo Zhuang (2026). Real-time dynamic integrated process planning and scheduling with reconfigurable manufacturing cells via multi-agent reinforcement learning. Journal Of Manufacturing Systems, Vol. 850.DOI
2. 郑继禹，张梁，梁政，邓雄，何常琨（2026）. 大变形表面强化换热管强化换热成形实验与数值研究. 《水动力学研究与进展A辑》.DOI
3. Yanrong Yang, F Wang, Zheng Liang, Xiaohong Bai, Rui Chen, Yuan Gao (2026). Energy Recovery and Utilization During the Throttling in Natural Gas Wellheads. Journal of energy resources technology..DOI
4. Liang Zheng, Xiaodi Chen, Cunbo Zhuang, Jianhua Liu, Yongyang Zhang, Lijuan Lai (2025). Dynamic scheduling for flexible job-shop with reconfigurable manufacturing cells considering dynamic job arrivals based on deep reinforcement learning. International Journal Of Production Research, Vol. 630, No. 20.DOI
5. 高源，张梁，梁政，郑庭（2025）. 电磁激励器结构的多目标优化设计与研究. 《仪器仪表学报》.
6. 许磊，戚振，梁政（2025）. 基于CAE的异型冷却管道动态特性分析. 《特种设备安全技术》.
7. 梁政，许磊，戚振（2025）. 基于有限元方法的换热器关键部件模态和应力特性分析. 《特种设备安全技术》.
8. Yanrong Yang, Zheng Liang, Wang Fei, Xueyong Zeng, Yuan Gao (2025). Optimal retrofitting for turboexpander in natural gas gathering and transmission stations. Energy Sources Part A Recovery Utilization and Environmental Effects.DOI
9. Duyu Hou, Zheng Liang, Zhuozhuang Zhang, Zihan Wang (2025). Studies on Vibration and Synchronization Characteristics of an Anti-Resonance System Driven by Triple-Frequency Excitation. Machines.DOI
10. Yuan Gao, Liang Zhang, Zheng Liang, Ting Zheng, Xiong Deng, Xin Chen (2025). Detection Model for Automatic Defect Quantification and Segmentation for Stepped Eddy Current Thermography. IEEE Sensors Journal.DOI
11. 王桂茂，刘喜顺，唐善杰，梁政，常玉敏（2024）. 新型工具钢带热处理关键技术装备研发与应用. 《机电工程技术》.
12. Jiyu Zheng, Liang Zhang, Zheng Liang, Xin Chen (2024). Thermo-hydraulic performance inside convergent rectangle channel with large-deformed dimples. Process Safety and Environmental Protection.DOI
13. Yuan Gao, Zheng Liang, Liang Zhang, Ting Zheng, Jiawei Zhou, Jiyu Zheng, Yanrong Yang (2024). Application of residual network based on multispectral attention mechanism in stepped eddy current thermography defect detection. Infrared Physics & Technology.DOI
14. Jiyu Zheng, Liang Zhang, Zheng Liang, Bojia Wei, Zhongchao Yan, Xin Chen (2024). Numerical Investigation of Air-Steam Condensation in a Vertically Enhanced Tube with Concave and Convex Surfaces. Nuclear Science and Engineering.DOI
15. Yuan Gao, Zheng Liang, Liang Zhang, Ting Zheng, Jiawei Zhou, Jiyu Zheng (2024). Quantification of depth and morphology of internal corrosion defects by stepped eddy current thermography skewness under weak excitation conditions. Measurement.DOI
16. Jiawei Zhou, Liang Zhang, Zheng Liang, Ting Zheng, Jiyu Zheng (2023). Thermo-mechanical stability analysis of thermosyphons for pipeline soil and their optimal layout in permafrost regions. Cold Regions Science and Technology.DOI
17. Jiyu Zheng, Zheng Liang, Liang Zhang, Jiawei Zhou, Zhenqiang Kang, Shaomin Huang (2023). Numerical investigation of air–steam condensation in a vertically enhanced tube with dimples and protrusions. Annals of Nuclear Energy.DOI
18. Jiyu Zheng, Zheng Liang, Liang Zhang, Yangjun Qiu, Jiawei Zhou, Zhongchao Yan (2023). Numerical Study on Thermo-Hydraulic Performance of Enhanced Tube With Crossed Helical Dimples. Journal of Thermal Science and Engineering Applications.DOI
19. Jiyu Zheng, Zheng Liang, Liang Zhang, Jiawei Zhou, Zhongchao Yan (2022). Forming experiment of extruded tube with crossed ellipsoidal dimples and numerical investigation on heat transfer enhancement and flow characteristics. International Communications in Heat and Mass Transfer.DOI
20. Jiyu Zheng, Liang Zhang, Chenggang Liu, Zheng Liang, Xiong Deng (2022). A Numerical Study on Heat Transfer Enhancement and Fluid Flow of Enhanced Tube With Ellipsoidal Dimples and Protrusions. Journal of Thermal Science and Engineering Applications.DOI
21. Xiangtao Xiao, Zheng Liang, Song Hua Tang, Liang Zhang (2021). Design and Experiment of a Two-Coil Magnetic Core Inductor Used for the Stepped Eddy Current Thermography Technique. IEEE Sensors Journal.DOI
22. Ting Zheng, Zheng Liang, Liang Zhang, Song Hua Tang, Zhongyin Cui (2021). Safety assessment of buried natural gas pipelines with corrosion defects under the ground settlement. Engineering Failure Analysis.DOI
23. Liang Zhang, Wei Xiong, Jiyu Zheng, Zheng Liang, Shuai Xie (2021). Numerical analysis of heat transfer enhancement and flow characteristics inside cross-combined ellipsoidal dimple tubes. Case Studies in Thermal Engineering.DOI
24. Xuegang Zhang, Zheng Liang (2021). Mathematical model and contact characteristics of curvilinear cylindrical gears with line contact. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
25. Xiangtao Xiao, Zheng Liang, Liang Zhang, Song Hua Tang (2021). Design and investigation of a two-coil magnetic core inductor used for Eddy current pulsed thermography. Measurement.DOI
26. Liang Zhang, Wei Xiong, Zheng Liang (2021). Effect of outline curvature degree on heat transfer and flow characteristics inside dimpled tubes and spirally grooved tubes. Heat Transfer.DOI
27. Xuegang Zhang, Zheng Liang (2021). Comparison of Conventional Double-Helical and Curvilinear Cylindrical Gear Drives in Terms of Transmission Errors and Stress. Transactions of FAMENA.DOI
28. 蒋发光，张敏，杨秀菊，梁政（2020）. 第七代超深水海洋平台钻机双井架的等强度多目标优化. 《天然气工业》.
29. Shuangshuang Li, Liwen Zhang, Zheng Liang, Chunyan Kong (2020). Experimental and numerical analysis for vibration identification and mitigation of a coalescer system. Engineering Failure Analysis.DOI
30. Guanghui Zhao, Jijia Zhong, Chuang Feng, Zheng Liang (2020). Simulation of ultra-low cycle fatigue cracking of coiled tubing steel based on cohesive zone model. Engineering Fracture Mechanics.DOI
31. Song Hua Tang, Zheng Liang, Yulong Zhu (2020). Numerical Investigation on Heat Transfer Characteristics in Electronic Cavity of Downhole Measurement-While-Drilling System. Journal of Thermal Science and Engineering Applications.DOI
32. Faguang Jiang, Min Zhang, Xiuju Yang, Zheng Liang, Anyi Wang (2020). Research on Optimal Design of Dual Derrick for the 7th Generation Ultra-Deepwater Offshore Platform. IOP Conference Series Earth and Environmental Science.DOI
33. Jie Zhang, Hao Zhang, Lan Zhang, Zheng Liang (2020). Buckling Response Analysis of Buried Steel Pipe under Multiple Explosive Loadings. Journal of Pipeline Systems Engineering and Practice.DOI
34. Faguang Jiang, Min Zhang, Xiuju Yang, Xingchang Zeng, Zheng Liang, Dayang Li (2020). Research on Optimization Design of Dual Derrick for Offshore Platform Based on RSM. IOP Conference Series Earth and Environmental Science.DOI
35. 肖仕红，唐鹏，孙传轩，梁政，沙喆（2019）. 基于AHP的水下采油树海试模糊综合评价. 《石油钻采工艺》.DOI
36. Honggang He, Zheng Liang, Xiao Cui (2019). Molding and Simulation of Pig Speed with Brake Unit in Gas Pipeline. Journal of Pipeline Systems Engineering and Practice.DOI
37. Liang Zhang, Shuai Xie, Zheng Liang, Jie Zhang, Yulin Wang, Wei Chen, Chunyan Kong (2019). Numerical investigation of flow and heat transfer in enhanced tube with slot dimples. Heat and Mass Transfer.DOI
38. Honggang He, Zheng Liang (2019). Simulation of Pigging with a Brake Unit in Hilly Gas Pipeline. Journal of Applied Fluid Mechanics.DOI
39. Guanghui Zhao, Ju Li, Y.X. Zhang, Jijia Zhong, Zheng Liang, Shihong Xiao (2019). A study on ductile fracture of coiled tubing based on cohesive zone model. Engineering Fracture Mechanics.DOI
40. Zheng Liang, Yang Qin, Jie Zhang, Bo Zhu (2019). Mechanical Analysis of Buried Polyethylene Pipelines under Ground Overload. Journal of Failure Analysis and Prevention.DOI
41. Zheng Liang, Xin Lu, Jie Zhang (2019). Thermal vertical buckling of surface-laid submarine pipelines on a sunken seabed. Ocean Engineering.DOI
42. Zheng Liang, Shuai Xie, Jie Zhang, Liang Zhang, Yulin Wang, Hu Ding (2019). Numerical investigation on plastic forming for heat transfer tube consisting of both dimples and protrusions. The International Journal of Advanced Manufacturing Technology.DOI
43. Honggang He, Zheng Liang (2019). Speed Simulation of Pig Restarting from Stoppage in Gas Pipeline. Mathematical Problems in Engineering.DOI
44. Zheng Liang, Bao Zhu Tian, Liang Zhang (2019). Research on Apparent Resistivity Imaging of Transient Electromagnetic Method for Oil and Gas Pipelines Based on GA‐BP Neural Network. Mathematical Problems in Engineering.DOI
45. Honggang He, Zheng Liang, Yishan Guo (2019). Inlet pressure simulation of pigging in uphill gas pipeline. Mechanics & Industry.DOI
46. 张杰，梁政，韩传军（2018）. 管道非开挖技术用大扭矩组合螺杆钻具设计. 《石油机械》.
47. 朱兆亮，梁政，郝军，宋治国，杨高（2018）. 注入头下弯曲连续管压曲载荷研究. 《石油机械》.
48. Shuai Xie, Zheng Liang, Jie Zhang, Liang Zhang, Yulin Wang, Hu Ding (2018). Numerical investigation on flow and heat transfer in dimpled tube with teardrop dimples. International Journal of Heat and Mass Transfer.DOI
49. Song Hua Tang, Zheng Liang, Guang Hui Zhao (2018). Dynamic stability of lateral vibration of a tubing string in flowing production. Journal of Vibroengineering.DOI
50. Zheng-Wei Guo, Zheng Liang (2018). Analysis of the Pipeline Pull-back Load for Horizontal Directional Drilling. KSCE Journal of Civil Engineering.DOI
51. ZhaoLiang Zhu, Zheng Liang, Yang Yu Hu (2018). Buckling behavior and axial load transfer assessment of coiled tubing with initial curvature in an inclined well. Journal of Petroleum Science and Engineering.DOI
52. Zheng Liang, Yao Xiao, Jie Zhang (2018). Stress–Strain Analysis of a Pipeline With Inner and Outer Corrosion Defects. Journal of Pressure Vessel Technology.DOI
53. Jie Zhang, Yao Xiao, Zheng Liang (2018). Mechanical behaviors and failure mechanisms of buried polyethylene pipes crossing active strike-slip faults. Composites Part B Engineering.DOI
54. ZhaoLiang Zhu, Zheng Liang, Jun Hao (2018). Buckling load of bending coiled tubing under an injector. Advances in Mechanical Engineering.DOI
55. Chuan Zhang, Zheng Liang, Yong Lin, Qiulin Tang, Jie Zhang (2018). Failure Analysis and Structural Improvement for the Swivel Joint in High-Pressure Manifold. Journal of Failure Analysis and Prevention.DOI
56. Zheng Liang, ZhaoLiang Zhu (2018). Critical helical buckling load assessment of coiled tubing under axial force by use of the explicit finite-element method. Journal of Petroleum Science and Engineering.DOI
57. Shuai Xie, Zheng Liang, Liang Zhang, Yulin Wang (2018). A numerical study on heat transfer enhancement and flow structure in enhanced tube with cross ellipsoidal dimples. International Journal of Heat and Mass Transfer.DOI
58. Zheng-Wei Guo, Rong Deng, Zheng Liang, Song Yang (2018). Non-spherical single cone bit mechanics analysis and tooth load test. Journal of Petroleum Science and Engineering.DOI
59. Guanghui Zhao, Ju Li, Y.X. Zhang, Zheng Liang, Chunhui Yang (2018). An Inverse Analysis-Based Optimal Selection of Cohesive Zone Model for Metallic Materials. International Journal of Applied Mechanics.DOI
60. Shuai Xie, Zheng Liang, Liang Zhang, Yulin Wang, Hu Ding, Jie Zhang (2018). Numerical investigation on heat transfer performance and flow characteristics in enhanced tube with dimples and protrusions. International Journal of Heat and Mass Transfer.DOI
61. Jie Zhang, Lan Zhang, Zheng Liang (2017). Buckling failure of a buried pipeline subjected to ground explosions. Process Safety and Environmental Protection.DOI
62. Guanghui Zhao, Song Hua Tang, Zheng Liang, Ju Li (2017). Dynamic stability of a stepped drillstring conveying drilling fluid. Journal of Theoretical and Applied Mechanics/Mechanika Teoretyczna i Stosowana.DOI
63. Chunyan Kong, Derong Zhang, Zheng Liang, Rong Cai (2017). Mechanical analysis of drill bit during dual-casing sidetracking. Journal of Petroleum Science and Engineering.DOI
64. Zheng Liang, Shuai Xie, Liang Zhang, Jie Zhang, Yulin Wang, Yanshan Yin (2017). Influence of geometric parameters on the thermal hydraulic performance of an ellipsoidal protruded enhanced tube. Numerical Heat Transfer Part A Applications.DOI
65. Wang Fei, Zheng Liang (2017). Load Assessment on the Horizontal Braces of Semi-submersible Drilling Platform Under Ocean Wave. Arabian Journal for Science and Engineering.DOI
66. Liang Zhang, shuangshuang Li, Zheng Liang, Zhewei Ye (2017). Efficiency Evaluation and Experiment of Natural Gas Reciprocating Compressor. Journal of Engineering Research.DOI
67. Zheng Liang, Honggang He, Weili Cai (2017). Speed simulation of bypass hole PIG with a brake unit in liquid pipe. Journal of Natural Gas Science and Engineering.DOI
68. Fei Wang, Liming Dai, Zheng Liang (2017). Effects of wave loads on the horizontal bracing strength of a semi-submersible platform. Proceedings of the Institution of Civil Engineers - Maritime Engineering.DOI
69. 吉效科，梁政（2016）. 偏心摆动油气混输泵的动力特性研究. 《中国机械工程》.
70. Fei Wang, Zheng Liang, Xiong Deng (2016). Automation of liquid removal from natural gas wells. Proceedings of the Institution of Civil Engineers - Energy.DOI
71. Jie Zhang, Zheng Liang, Han Zhang (2016). Response Analysis of Buried Pipeline Subjected to Reverse Fault Displacement in Rock Stratum. Transactions of FAMENA.DOI
72. Jie Zhang, Chuanjun Han, Zheng Liang (2016). Physics of failure analysis of power section assembly for positive displacement motor. Journal of Loss Prevention in the Process Industries.DOI
73. Jie Zhang, Zheng Liang, Chengyu Xia (2016). Stress-strain response analysis and protective device design for buried pipeline impacted by perilous rock. Journal of Vibroengineering.DOI
74. Jie Zhang, Zheng Liang, Ding Feng, Chuan Zhang, Chengyu Xia, Yiliu Tu (2016). Response of the buried steel pipeline caused by perilous rock impact: Parametric study. Journal of Loss Prevention in the Process Industries.DOI
75. Lan Zhang, Zheng Liang, Jie Zhang (2016). Mechanical Response of a Buried Pipeline to Explosion Loading. Journal of Failure Analysis and Prevention.DOI
76. Jie Zhang, Zheng Liang, Han Zhang, Ding Feng, Chengyu Xia (2016). Failure analysis of directional crossing pipeline and design of a protective device. Engineering Failure Analysis.DOI
77. Jie Zhang, Zheng Liang, Chuanjun Han (2016). Mechanical Behavior Analysis of the Buried Steel Pipeline Crossing Landslide Area. Journal of Pressure Vessel Technology.DOI
78. Fei Wang, Zheng Liang (2016). Analytical solution for crack growthing of semi-submersible platform’s horizontal brace. Journal of Engineering Research.DOI
79. Jie Zhang, Zheng Liang, Guanghui Zhao (2016). Mechanical behaviour analysis of a buried steel pipeline under ground overload. Engineering Failure Analysis.DOI
80. 梁政，李双双，张梁，徐立，田家林，冯丞科（2015）. 往复式压缩机工艺管线振动超标与治理. 《天然气工业》.
81. 鄢强，吴涛，梁政（2015）. CNG压缩机活塞杆TiN耐磨涂层的性能研究. 《压缩机技术》.
82. 罗渊仁，梁政（2015）. ZTY265天然气压缩机连杆对十字头作用力分析. 《机械研究与应用》.
83. 张澜，梁政（2015）. 液压驱动压裂泵大功率散热器设计与分析. 《石油矿场机械》.
84. 梁政，黄文俊，李峰，蒋发光，侯敏（2015）. 基于API标准的浮式平台塔形井架有限元计算. 《石油矿场机械》.
85. 张杰，梁政，韩传军（2015）. 定向穿越管道的挤毁失效及其防护装置的设计. 《天然气工业》.
86. 董超群，梁政，唐伟，田家林（2015）. 天然气压缩机活塞杆失效机理及疲劳寿命分析. 《机械设计》.
87. 梁政，赵勇，蒋发光（2015）. 高压模拟试验舱的设计及强度分析. 《石油机械》.
88. Jie Zhang, Zheng Liang, Chuanjun Han (2015). Mechanical behaviour analysis of buried pressure pipeline crossing ground settlement zone. International Journal of Pavement Engineering.DOI
89. Jie Zhang, Zheng Liang, Chuanjun Han (2015). Failure Analysis and Numerical Simulation of the Buried Steel Pipeline in Rock Layer Under Strike-Slip Fault. Journal of Failure Analysis and Prevention.DOI
90. Jie Zhang, Zheng Liang, Chuanjun Han, Han Zhang (2015). Buckling behaviour analysis of a buried steel pipeline in rock stratum impacted by a rockfall. Engineering Failure Analysis.DOI
91. Jie Zhang, Zheng Liang, Chuanjun Han, Han Zhang (2015). Numerical simulation of buckling behavior of the buried steel pipeline under reverse fault displacement. Mechanical sciences.DOI
92. Jie Zhang, Zheng Liang, Chuanjun Han (2015). Finite element analysis of wrinkling of buried pressure pipeline under strike-slip fault. Mechanika.DOI
93. Jie Zhang, Zheng Liang, Chuanjun Han (2015). Numerical Modeling of Mechanical Behavior for Buried Steel Pipelines Crossing Subsidence Strata. PLoS ONE.DOI
94. Jie Zhang, Zheng Liang, Chuanjun Han (2015). Effect of surrounding soil on stress–strain response of buried pipelines under ground loads. The IES Journal Part A Civil & Structural Engineering.DOI
95. Jie Zhang, Zheng Liang, Chuanjun Han (2015). Effects of Ellipsoidal Corrosion Defects on Failure Pressure of Corroded Pipelines Based on Finite Element Analysis. International Journal of Electrochemical Science.DOI
96. 董超群，梁政，田家林，马科笃，黄硕，卢海玲（2014）. 天然气压缩机组用燃气发动机故障诊断技术分析. 《北京工业大学学报》.
97. 魏秦文，朱鑫，梁政，肖仕红，郝广辉，王庆仓（2014）. 智能钻柱关键密封技术研究. 《石油钻采工艺》.
98. 梁政，李双双，张力文，朱小华，田家林（2014）. CNG脱水用4A分子筛再生性能实验研究. 《石油与天然气化工》.
99. 董超群，梁政，田家林，余笃军，马科笃，张植（2014）. 基于天然气压缩机性能监测的预知维修技术. 《机械设计与研究》.
100. 梁政，董超群，田家林，余笃军，马科笃（2014）. 层次分析法确定压缩机整体评价部件权重. 《西南石油大学学报(自然科学版)》.
101. Zheng Liang, Shuangshuang Li, Jialin Tian, Liang Zhang, Chengke Feng, Liwen Zhang (2014). Vibration cause analysis and elimination of reciprocating compressor inlet pipelines. Engineering Failure Analysis.DOI
102. Jie Zhang, Zheng Liang, Chuanjun Han (2014). Buckling behavior analysis of buried gas pipeline under strike-slip fault displacement. Journal of Natural Gas Science and Engineering.DOI
103. Jie Zhang, Zheng Liang, Chuanjun Han (2014). Failure Analysis and Finite Element Simulation of Above Ground Oil–Gas Pipeline Impacted by Rockfall. Journal of Failure Analysis and Prevention.DOI
104. Jie Zhang, Zheng Liang, Chuanjun Han (2014). Failure analysis and finite element simulation of key components of PDM. Engineering Failure Analysis.DOI
105. Zheng Liang, Fei Wang, Xiong Deng (2014). A novel technology of combining foam injection and compression to lift liquid in water flooded gas wells. Journal of Natural Gas Science and Engineering.DOI
106. Chuanjun Han, Jie Zhang, Zheng Liang (2014). Thermal failure of rubber bushing of a Positive Displacement Motor: A study based on thermo-mechanical coupling. Applied Thermal Engineering.DOI
107. Jie Zhang, Zheng Liang, Chuanjun Han (2014). Buckling analysis of buried steel pipelines crossing the thrust faults. Strength Fracture and Complexity.DOI
108. Jie Zhang, Zheng Liang, Chuanjun Han (2014). Numerical Simulation of Pipeline Deformation Caused by Rockfall Impact. The Scientific World JOURNAL.DOI
109. 梁政，李双双，田家林，朱小华，梅庆刚，张力文（2013）. CNG压缩机节能技术与试验分析. 《天然气工业》.
110. 田家林，梁政，杨琳，董超群，李双双，范哲，庞小林（2013）. 整体式天然气压缩机能效计算反平衡方法. 《石油学报》.
111. 梁政，李双双，田家林，朱小华，张力文（2013）. CNG站脱水装置节能技术. 《天然气工业》.
112. 梁政，张力文，蒋发光，李双双（2013）. 顶驱下套管驱动工具现状与发展建议. 《石油矿场机械》.
113. 董超群，梁政，田家林，田芳，李星蓉，李双双，何虹钢（2013）. 天然气压缩机气体多变指数的确定. 《压缩机技术》.
114. 田家林，庞小林，梁政，杨琳，张亮，魏秦文，李友，朱永豪（2013）. 旋风状井底模型的新型钻头运动特性. 《石油学报》.
115. 梁政，李海伟，蒋发光，赵世峰，张佳佳（2013）. 73mm可投捞式井下节流器室内试验研究. 《石油矿场机械》.
116. 梁政，李海伟，赵世峰，蒋发光，张佳佳（2013）. Ф73mm井下节流嘴流场仿真分析. 《石油矿场机械》.
117. 梁政，李双双，田家林，梅庆钢，张力文（2013）. L-12/5-250型压缩机节能改造与效果分析. 《石油矿场机械》.
118. 高李，梁政（2013）. 高压管道抢修卡具的优化设计. 《油气储运》.
119. Guanghui Zhao, Zheng Liang, Hongrui Zhao, Xiong Fang Deng, Faguang Jiang (2013). Failure analysis of high-drop pipeline in the process of dewatering. Engineering Failure Analysis.DOI
120. Fa Guang Jiang, Zheng Liang, Guang Hui Zhao, Yong Hong Yan, Pan Wang (2012). Study on the Axial Tooth Shape of CRT Slips. Advanced materials research.DOI
121. Fa Guang Jiang, Zheng Liang, Li Wen Zhang (2012). Study on Finite Element Analysis Models of Slant Rig Working Course. Advanced materials research.DOI
122. Fa Guang Jiang, Zheng Liang, Guang Hui Zhao, Pan Wang, Liang Zhang (2012). Research on Hydraulic Self-Enhancement Technology of Fracturing Pump’s Valve Box. Advanced materials research.DOI
123. Fa Guang Jiang, Zheng Liang, Guang Hui Zhao, Yong Hong Yan, Pan Wang (2012). Research on Mechanical Property of Top Drive Casing Running Tool’s Slips. Applied Mechanics and Materials.DOI
124. 王安义，梁政，刘云见，白兰昌，刘敏达（2011）. 井下连续管轴向力及其影响因素分析. 《石油机械》.
125. 蒋发光，梁政，李莲明，邓雄，王飞（2011）. φ73mm油管用井下节流器胶筒有限元分析. 《石油机械》.
126. 张磊，梁政，姜华（2011）. 140MPa压裂泵液缸强度及寿命预测分析. 《石油矿场机械》.
127. 田家林，梁政，杨琳，邓雄，张梁（2011）. 整体式燃气压缩机能效测试与分析. 《石油矿场机械》.
128. 田家林，梁政，杨琳，邓雄，张梁（2011）. CNG储气井套管腐蚀疲劳机理研究. 《石油矿场机械》.
129. 梁政，兰洪强，邓雄，刘继银，李莲明（2011）. 大管径天然气管道预装冻芯局部冷冻封堵. 《油气储运》.
130. 姜华，梁政，张磊（2011）. 斜板式气液分离器流场的数值模拟. 《油气储运》.
131. Zheng Liang, Hongqiang Lan (2011). Research on Partly Freezing Sealing Technology for Large Diameter Natural Gas Pipeline.DOI
132. Lian Cheng Ren, Zheng Liang, Meng Jiang, Lin Yang, Jia Lin Tian (2011). Contrast Study on the Radial Velocity of the Flow Field of the Hydrocyclones with Different Inlet Structures. Advanced materials research.DOI
133. Jia Lin Tian, Zheng Liang, Lin Yang, Xue Qing Mei, Bai Chuan Xiao, Bei Zhang (2011). Traction Transmission Gearbox Mechanical Properties Numerical Calculation and Strength Analysis. Advanced materials research.DOI
134. Jia Lin Tian, Zheng Liang, Lin Yang, Lian Cheng Ren, Xue Qing Mei, Bai Chuan Xiao, Lan Lan (2011). Numerical Calculation and Simulation Research on Natural Gas Downhole Choke Flow Field. Applied Mechanics and Materials.DOI
135. Liancheng Ren, Zhenzhen Lei, Zheng Liang, Lin Yang (2011). A quantificational study on the radial velocity of fluid in Hydrocyclone. International Conference on Mechanic Automation and Control Engineering.DOI
136. Jia Lin Tian, Zheng Liang, Lin Yang, Xue Qing Mei, Qing Gang Mei, Yu Jia (2011). Numerical Calculation of Throttle Nozzle Diameter Influence on Downhole Choke Flow Field. Applied Mechanics and Materials.DOI
137. Guanghui Zhao, Zheng Liang, Junyao Tian, Fa Guang Jiang, Liang Zhang (2011). Large deflection plastic studying on preforming of multilateral tool. Materials Research Innovations.DOI
138. Guang Hui Zhao, Zheng Liang, Fa Guang Jiang, Jia Lin Tian, Liang Zhang (2011). Out-Plane Stability of Derrick of Inclined Drilling Rig. Advanced materials research.DOI
139. 邓雄，王飞，梁政，张梁（2010）. 低渗产水气井间歇开采制度研究. 《石油天然气学报》.
140. 杨琳，梁政，田家林，任连城，邓雄（2010）. 粘度对液-液旋流器内部流场及分离效率影响的仿真分析. 《流体机械》.
141. 蒋发光，梁政，赵广慧，孙保全，申强，邓雄（2010）. CT-摩擦块静摩擦因数测定试验研究. 《石油机械》.
142. 梁政，兰洪强，李莲明，邓雄（2010）. 小管径天然气管道局部冷冻封堵技术. 《天然气工业》.
143. 何茂林，梁政，李永生（2010）. GB/T 9711材料屈服极限和压力使用范围的探讨. 《天然气工业》.
144. 王安义，梁政，吴大飞（2010）. 连续管井下作业摩阻计算分析. 《石油机械》.
145. 曲海，魏秦文，梁政，徐淼（2010）. 直线电机抽油泵泵阀不同工况特点研究. 《石油矿场机械》.
146. 蒋宝云，邓雄，梁政，赵建民（2010）. 盐家气田浅层气井防砂技术研究. 《石油矿场机械》.
147. 蒋发光，梁政，李莲明，吕治忠（2010）. 73mm油管用井下节流器卡定系统研究. 《石油矿场机械》.
148. 叶哲伟，梁政，张梁（2010）. 液压顶驱能量回收系统建模与求解. 《石油机械》.
149. Zheng Liang, Huai Xin Mao, Guang Hui Zhao, Fa Guang Jiang (2010). Strength Analysis of Coiled Tubing in the Injector. Advanced materials research.DOI
150. Zheng Liang (2010). NUMERICAL SIMULATION OF FLOW FIELD WITHIN HYDRAULIC END OF OIL PUMP DRIVEN BY LINEAR MOTOR. Journal of Southwest Petroleum University.
151. 张永泽，梁政，蒋发光，蒲容春（2009）. 复杂结构有限元分析强度判定方法. 《石油矿场机械》.
152. 杨志，栾国华，梁政，邓雄，廖云虎（2009）. 机抽排水采气配套新技术的研究与应用. 《天然气工业》.
153. 邓雄，梁政，张艳玲，文绍牧，邵天祥（2009）. 重庆气矿高压采气管线堵塞分析及应对措施. 《天然气工业》.
154. 张梁，梁政，邓雄，田家林（2009）. 增压站天然气发动机余热利用方案研究. 《石油矿场机械》.
155. 邓雄，梁政，张梁，田家林（2009）. 图论在集输管网可视化管理中的应用研究. 《石油矿场机械》.
156. 梁政，邓雄，吕治忠，张梁，田家林（2009）. 泡沫排水采气消泡效果监测系统方案设计. 《石油矿场机械》.
157. 丛海洋，孙浩玉，王卫，梁政，马林昌，肖仕红，吴仲华（2009）. 基于动力及信号传输钻杆平台的智能化动力钻井技术. 《石油矿场机械》.
158. 高文凯，梁政，钟功祥（2009）. 钻机启动过程快绳拉力研究. 《石油矿场机械》.
159. 王惠明，梁政（2009）. 斜板式气液分离器的设计. 《化工机械》.
160. 杨琳，梁政，田家林，邓雄（2009）. 聚驱污水特性对旋流器分离效率影响的研究. 《石油机械》.
161. 吴仲华，田家林，梁政，聂云飞，杨琳（2009）. 分支井井眼连接总成预成形过程仿真分析. 《石油矿场机械》.
162. Guanghui Zhao, Zheng Liang (2009). ANALYSIS OF COLLISION BETWEEN DRILLSTRING AND WELL SIDEWALL.DOI
163. Zheng Liang (2009). Design of the Inclined Plate Gravity Gas-Liquid Separators. Chemical Engineering & Machinery.
164. 赵广慧，梁政（2008）. 连续油管内流体压力损失研究进展. 《钻采工艺》.
165. 赵广慧，梁政（2008）. 连续油管力学性能研究进展. 《钻采工艺》.
166. 马艳洁，梁政，张天津，王惠明，梁春平（2008）. 磨料射流切割替代剪切闸板的可行性研究. 《石油矿场机械》.
167. 杨琳，梁政，田家林，张梁，何耀辉（2008）. CNG储气井智能监控系统设计. 《石油矿场机械》.
168. 杨琳，梁政，田家林，张梁，何耀辉（2008）. CNG储气井螺纹计算及有限元分析. 《石油矿场机械》.
169. 王惠明，吴世辉，梁政，朱海燕（2008）. 下偏杠铃型抽油机工作性能仿真研究. 《石油矿场机械》.
170. 吴冰，梁政，王德玉，叶哲伟，段会竹（2008）. 双缸单作用液压注水泵方案设计. 《石油矿场机械》.
171. 左芳君，钟功祥，梁政，吕治中（2008）. 基于传感器的融合技术对原油含水率的测量. 《石油矿场机械》.
172. 钟功祥，吕治中，梁政（2008）. 高压闸阀阀板与阀座摩擦因数的试验研究. 《石油矿场机械》.
173. 钟功祥，段会竹，梁政，左芳君，吴冰（2008）. 一种新型泥浆泵动力端的设计及运动仿真. 《石油矿场机械》.
174. 叶哲伟，梁政，吴冰，刘多容（2008）. 钻机钢丝绳提升系统力学模型及分析. 《石油矿场机械》.
175. 杨琳，梁政，田家林（2008）. 双锥型油水分离旋流器内部流场数值模拟. 《流体机械》.
176. 高文凯，梁政，钟功祥，张磊（2008）. 钻机快绳通过天车快绳轮极限偏角研究. 《石油机械》.
177. Guang Hui Zhao, Zheng Liang (2008). Dynamic Stability of Lateral Vibration of Bottom Hole Assemblies. Key engineering materials.DOI
178. 肖仕红，梁政，任连城（2007）. 智能钻井电缆传输电接头设计. 《石油钻采工艺》.
179. 周大伟，钟功祥，梁政（2007）. 国内外井下安全阀的技术现状及发展趋势. 《石油矿场机械》.
180. 何茂林，梁政，李永生（2007）. 天然气三甘醇脱水装置的国产化研究. 《钻采工艺》.
181. 何茂林，梁政，李永生（2007）. 埋地油罐的设计研究. 《石油化工设备技术》.
182. 肖仕红，梁政（2007）. 智能钻井电缆信号传输的研究现状及难点. 《石油矿场机械》.
183. 王东莉，梁政，姚洪成，黄军（2007）. 电磁水处理技术研究进展. 《石油矿场机械》.
184. 曲海，梁政，魏秦文（2007）. 直线电机采油泵球阀运动规律研究. 《流体机械》.
185. 梁政，吴世辉，任连城（2007）. 论水力旋流器流场数值模拟中湍流模型的选择. 《天然气工业》.
186. 马欣，梁政（2007）. 一种长输管道风险因素综合分析方法. 《天然气工业》.
187. 曾兴昌，钟功祥，梁政，庞然（2007）. HQ1400型压裂泵主曲轴有限元分析及改进设计. 《西南石油大学学报(自然科学版)》.
188. 蒋发光，梁政，钟功祥，彭代清，徐斌容，秦强（2007）. 多缸单作用往复泵动力端动力学研究. 《石油机械》.
189. 左芳君，钟功祥，梁政，吕治钟（2007）. 油田计量站自动测量装置. 《机械》.
190. 钟功祥，梁政（2007）. HQ1400型压裂泵动力端分析与设计. 《石油矿场机械》.
191. 左芳君，钟功祥，吕治忠，梁政（2007）. 油气水多相测量系统的设计. 《石油矿场机械》.
192. 曲海，梁政，魏秦文（2007）. 轴系零件远程设计系统的实现. 《石油矿场机械》.
193. Ren Lian-cheng, Zheng Liang, Zhong Gong-xiang, Shihui Wu (2007). A comparative study of the flow field of high viscosity media in conventional/rotary hydrocyclones. Petroleum Science.DOI
194. Zheng Liang (2007). The Analysis and Design of HQ1400 Compression Fracture Pump Power End. Oil Field Equipment.
195. Zheng Liang (2007). The Study of Technical State and Development Tendency for Down-hole Safety Valve of Domestic and Foreign. Oil Field Equipment.
196. Zheng Liang (2007). The Current Status and Difficulty of Research on the Wired Signal Transmission in Intelligent Drilling. Oil Field Equipment.
197. Zheng Liang (2007). INTEGRATED METHODOLOGY ON RISK FACTORS OF LONG-DISTANCE PIPELINE. Tianranqi gongye.
198. 梁政，杨志，邓雄，钟功祥，罗立然（2006）. 在役天然气分离除尘设备性能评价. 《天然气工业》.
199. 张梁，梁政，冯小波，谢强（2006）. 天然气压缩机气流脉动的消减研究. 《压缩机技术》.
200. 王东莉，梁政（2006）. 电磁油田污水处理. 《机械》.
201. 高文凯，梁政，钟功祥，彭代清，赵俊（2006）. 往复泵自动球阀运动规律数学模型及计算. 《石油矿场机械》.
202. 蒋发光，梁政，钟功祥，任连城（2006）. 1400型压裂泵动力端运动仿真及箱体有限元分析. 《石油矿场机械》.
203. 蒋发光，梁政，钟功祥，郑满圈（2006）. 高压注水泵曲轴结构改进探讨. 《机械》.
204. 孙艳萍，鲍泽富，钟功祥，梁政（2006）. 注水井井下分层测试监控系统设计. 《石油机械》.
205. 肖仕红，梁政（2006）. 旋转导向钻井技术发展现状及展望. 《石油机械》.
206. 任连城，梁政，钟功祥，吴世辉，辛桂彬（2005）. 基于CFD的水力旋流器流场模拟研究. 《石油机械》.
207. 梁政，杨勇华，樊洪，杨秀勇（2005）. 天然气—燃油双燃料机动船及船运CNG充气装置. 《天然气工业》.
208. 孙艳萍，钟功祥，梁政，吕治忠（2005）. 采油车自动监控系统的硬件设计. 《石油机械》.
209. 梁政，钟功祥，陈伟，刘让杰（2005）. 1400型压裂泵动力端花键轴断裂失效分析. 《机械》.
210. 任连城，梁政，钟功祥，吴世辉（2005）. 动态旋流技术的应用研究. 《石油矿场机械》.
211. 林元华，施太和，梁政，李润方（2004）. 冲旋钻井机械钻速仿真研究. 《石油学报》.
212. 钟功祥，梁政，王维军（2004）. 钻井液循环系统存在的问题及解决方案. 《石油机械》.
213. 林元华，宗玉宇，梁政，施太和，李润方（2004）. 石油钻井机械钻速预测研究进展. 《石油钻探技术》.
214. 林元华，施太和，梁政，巫才文，李润方（2004）. 冲旋钻井钻头仿真模型的建立研究. 《石油钻探技术》.
215. 钟功祥，梁政，彭彩珍（2003）. 提高机抽井系统效率的重要措施. 《钻采工艺》.
216. 杨志，梁政，钟功祥（2003）. 湍球湿式天然气除尘装置方案设计. 《石油机械》.
217. 周代余，梁政（2003）. 低效油井合理间歇抽油制度设计方法研究. 《钻采工艺》.
218. 王科荣，梁政，杨志，钟功祥（2002）. 天然气含尘量检测装置. 《石油机械》.
219. 杨志，梁政，钟功祥，杨秀勇，彭军（2001）. 过载保护式抽子研制与应用. 《钻采工艺》.
220. 邓雄，梁政，余孝林（2000）. 高温高压深井测试管柱三维力学分析. 《天然气工业》.
221. 毛伟，张绍槐，梁政（2000）. 垂直向上环状流特性参数预测模型. 《钻采工艺》.
222. 毛伟，梁政（1999）. 气井井筒压力、温度耦合分析. 《天然气工业》.
223. 郭艳林，梁政（1999）. 海底管道铺设施工设计分析. 《石油学报》.
224. 蒋洪，梁政，吴小朴，龙平（1998）. 南充轻烃回收装置工艺改造方案研究. 《天然气工业》.
225. 梁政，邓雄（1998）. 高温高压深井测试管柱力学研究初探. 《天然气工业》.
226. 王维，梁政（1997）. 关于悬垂管道计算模型的研究. 《天然气工业》.
227. 郑焰，梁政，贾朝霞（1997）. 稠油开采新思路─油层催化裂化技术. 《石油钻采工艺》.
228. 梁政，袁祥忠，钟功祥（1993）. 整筒管式抽油泵环隙漏失量的探讨. 《石油机械》.
229. 梁政，杨永亮（1992）. 整筒管式抽油泵泵筒径向变形的近似解. 《石油机械》.
230. 梁政（1991）. 滑坡地区管线应力和位移的分析. 《天然气工业》.
231. 梁政（1991）. 海洋管道漂浮敷设充水下沉时的分析. 《石油学报》.
232. 梁政（1991）. 等臂架空热力管道热胀位移分析. 《油气储运》.
233. 梁政（1991）. 关于阀球直径对泵阀开启压差影响的讨论. 《石油机械》.
234. 梁政（1991）. 关于整筒管式抽油泵间隙计算的探讨. 《石油机械》.
235. 梁政（1990）. 海洋管道直接漂浮拖运分析. 《油气储运》.
236. 梁政，袁祥忠（1989）. 海底输油管道充液不满时的耦联振动. 《石油学报》.
237. 袁祥忠，梁政（1988）. 关于“悬链线法钻定向井”的探讨. 《石油学报》.
238. 梁政（1987）. 两臂对称埋地纵向弯头升温载荷下的计算问题. 《油气储运》.
239. 袁祥忠，梁政（1987）. 斜直井内下部钻柱空间弯曲变形的探讨. 《石油学报》.
240. 梁政，袁祥忠（1987）. 埋地长输管道水平弯头升温载荷下的计算问题. 《油气储运》.
241. 梁政，袁祥忠（1986）. 关于挠性轴计算问题的讨论. 《石油学报》.
242. 梁政，袁祥忠（1984）. 关于在气举作业中管道强度和变形计算的探讨. 《油气储运》.

预印本

1. song tang, Jing Wei, Liang Zheng, Yingxin Yang, liang zhang (2022). Research on Active Cooling Technology of Measuring Instrument While Drilling Based on Insulation Tube in High Temperature Well. SSRN Electronic Journal.DOI