徐淑波｜山东建筑大学｜学者主页

2026

基于响应面法的上心盘预成形结构优化

钟青芸，黄丽丽，徐淑波，白昊龙，宗学恒，吴靖钊，王硕

《锻压装备与制造技术》

2026

Microstructural evolution mechanism and corrosion property enhancement of 2024-T6 aluminum alloy surface layer induced by ultrasonic surface rolling process

Tianhua Li, Shubo Xu, Xing-Chen Xu, Hailong Ma, Yanrui Wang, Ying Zhao, Chen Xu, Wenming Wang, Li-Yun Li

Surface & Coatings Technology

DOI

2026

Multi-parameter ultrasonic surface rolling for synergistic enhancement of wear and electrochemical corrosion performance in 20CrMoH steel

Yanrui Wang, Shubo Xu, Tianhua Li, Ying Zhao, Chen Xu, Weihai Zhang, Wenming Wang, Lindong Wang

Materials Chemistry and Physics

DOI

2025

Relation between materials, process, structure and property of metallic porous bone scaffolds fabricated by laser powder bed fusion (LPBF): a review

Shubo Xu, Yang Xue, HU Xin-zhi, Liu Peng, Sen Zhang, Yuefei Pan, Ren Guocheng

Optics & Laser Technology

DOI

2024

激光选区熔化成形多孔支架的有限元分析及性能研究

景鹏飞，孔岩，徐淑波，孙星，任国成

《中国铸造装备与技术》

2024

Mechanical Response and Microstructural Evolution of AZ31B Alloy Sheet in Uni-Axial Tension at Middle-Low Strain Rates and Temperatures

Haolong Bai, Wei Zheng, Guanghan Dang, Liang Chen, Juanjuan Han, Shubo Xu

Journal of Materials Engineering and Performance

DOI

2024

A review of laser additive manufacturing (LAM) aluminum alloys: Methods, microstructures and mechanical properties

Hongju Fan, Jiaying Hu, You Wang, Hongqiang Zhang, Wei Guo, Jishuai Li, Jishuai Li, Shubo Xu, Peng Liu, Peng Liu

Optics & Laser Technology

DOI

2023

高孔隙度可再生骨支架仿真与实验研究

徐淑波，赵晨浩，刘建营，张森，薛现猛，柳婷婷，林少宇

《精密成形工程》

2023

基于向内分流和芯轴交换耦合法冷锻成形直齿圆柱齿轮的数值模拟研究

张为海，徐淑波，李振东

《锻压装备与制造技术》

2023

中粗WC颗粒含量对Ni-Co粗晶硬质合金微观组织及性能的影响

赵晨浩，徐淑波，李辉，郑君姿，卢庆亮，潘悦飞

《稀有金属材料与工程》

2023

Study on Backward Extrusion of Large-Sized and Hollow Cup Using High-Strength Al-Zn-Mg-Cu Alloy

Fei Ni, Haolong Bai, Dehong Wang, Ling Li, Wei Zheng, Shubo Xu

Journal of Materials Engineering and Performance

DOI

2023

Finite Element Simulation of Bending Thin-Walled Parts and Optimization of Cutting Parameters

Hailong Ma, Aijun Tang, Shubo Xu, Tong Li

Metals

DOI

2022

固溶及双时效处理对增材制造316L不锈钢组织性能的影响

刘传坤，任国成，徐淑波，潘悦飞

《材料热处理学报》

2022

激光能量密度对金属增材制造微观结构及力学性能的影响研究

张再超，任国成，徐淑波，王瀚林，潘悦飞

《热加工工艺》

2022

SLM成形不同孔隙结构骨支架的仿真与实验研究

孙海波，徐淑波，张森，李阳，任国成，景财年

《精密成形工程》

2022

Deformation Behavior and Microstructure Evolution during Equal Channel Angular Pressing of Pure Aluminum

Shubo Xu, Hanlin Wang, Peng Liu, Cainian Jing, Guocheng Ren

Journal of Wuhan University of Technology-Mater Sci Ed

DOI

2022

Ni含量对WC-Co-Ni硬质合金的力学性能和耐腐蚀性能的影响

孙化鑫，徐淑波，李辉，郑君姿，卢庆亮

《稀有金属与硬质合金》

2021

汽车后备箱底板覆盖件成型的有限元分析

徐淑波，薛现猛，任国成，景财年

《模具技术》

2021

等通道弯角挤压过程有限元分析与挤压模具优化设计

徐淑波，孙化鑫，任国成，景财年，李婷婷

《中国铸造装备与技术》

2021

纯铝圆形挤压件等通道弯角挤压微观组织与力学性能

徐淑波，张森，景财年，林晓娟，刘鹏

《塑性工程学报》

2021

模具几何形状对镁合金ECAP变形均匀性的影响

徐淑波，孙海波，刘婷，景财年，刘鹏

《锻压装备与制造技术》

DOI

2021

选择性激光熔化成形自生长多孔支架的建模与实验研究

王瀚林，徐淑波，刘鹏，任国成

《锻压装备与制造技术》

DOI

2021

AZ31镁合金等横截面通道角温挤压变形机理分析与实验研究

徐淑波，张世超，任国成，林晓娟，刘鹏

《塑性工程学报》

2021

AZ31镁合金剧烈塑性变形过程分析与力学性能研究

徐淑波，刘建营，任国成，景财年，刘鹏

《塑性工程学报》

2021

EFFECT OF C-Mn PARTITIONING ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF TRIP STEEL

Cainian Jing, Qiteng Lei, Tao Lin, Daomin Ye, Cong Wu, Jingrui Zhao, Shubo Xu

Materiali in tehnologije

DOI

2021

Laser nano-technology of light materials: Precision and opportunity

Zhiyun Ye, Molin Su, Jianing Li, Cainian Jing, Shubo Xu, Liqiang Liu, Guocheng Ren, Xiaolin L. Wang

Optics & Laser Technology

DOI

2021

Study on dislocation and microstructural properties of friction stir welded joint for 2024-T4 aluminum alloys

Zhang Geming, Peng Liu, Shi Qingyu, Shubo Xu, Jianing Li, Feng Keyun, Jing Cainian

Kovove Materialy-Metallic Materials

DOI

2020

激光选区融化成形多孔硬骨支架的建模、仿真及实验研究

徐淑波，孟子翔，刘鹏，任国成，景财年

《稀有金属材料与工程》

2020

Surface reinforcements of TA15 titanium alloy with laser induced Co base multiphase composites

Jianing Li, Zhiyun Ye, Cainian Jing, Shubo Xu, Fusheng Yu, Kegao Liu, Xigui Sun, Shushuai Liu, Fan Cao, Liqiang Liu, Xiaolin L. Wang

Optics & Laser Technology

DOI

2020

LASER SURFACE REINFORCEMENT OF THE Ti/Al TIG WELDED JOINT

Zhiyun Ye, Jianing Li, Juan Wang, Shubo Xu, Cainian Jing, Yanhua Zhao, Guanchao Li, Xinzhu Gan, Fukun Ma, Fusheng Yu

Surface Review and Letters

DOI

2020

Effect of Different Isothermal Time on Microstructure and Mechanical Property of the Low-Carbon Steel Treated by Dual-Stable C-Mn Partitioning Process

Cainian Jing, Xiaoyun Ding, Daomin Ye, Jingrui Zhao, Tao Lin, Shubo Xu

Scanning

DOI

2019

Laser deposition‐additive manufacturing of Ti–B/TiC ceramics reinforced microlaminates

Jianing Li, Zhongkui Zhao, Xiaolin L. Wang, Shubo Xu

International Journal of Applied Ceramic Technology

DOI

2018

剧烈塑性变形对AZ31镁合金微观组织演化的影响

徐淑波，张小东，景财年，林晓娟，刘鹏

《稀有金属材料与工程》

2018

Effect of Solid Solution + Double Ageing on Microstructure and Properties in the Layer by Layer of the Z-Y Interface of Inconel 718 alloys Fabricated by SLM

Peng Liu, Siyu Sun, Shubo Xu, Meiqing Cao, Chang Hong, Jia-ying Hu

Materials Research

DOI

2018

Effect of laser shock peening on the microstructural characterization in weld nugget zone of friction stir welded 7050 aluminum alloys

Peng Liu, Jiaying Hu, Siyu Sun, Shubo Xu, Guocheng Ren

Journal of Laser Applications

DOI

2018

Microstructure and properties in the weld surface of friction stir welded 7050-T7451 aluminium alloys by laser shock peening

Peng Liu, Siyu Sun, Shubo Xu, Yang Li, Guocheng Ren

Vacuum

DOI

2017

数值模拟在材料成形原理中的教学应用研究——以山东建筑大学为例

任国成，赵忠魁，徐淑波，刘科高

《山东建筑大学学报》

2017

Microstructure and phase transformation on the surface of Inconel 718 alloys fabricated by SLM under 1050°C solid solution + double ageing

Ke-yun Feng, Peng Liu, Huaixue Li, Siyu Sun, Shubo Xu, Jianing Li

Vacuum

DOI

2017

Study on precipitated phases, dislocations and hardness in the HAZ of friction stir welded joint of 2024 aluminum alloy

Peng Liu, Ke-yun Feng, Shubo Xu, Ge-ming Zhang, Meiqing Cao, Jianing Li, Chuanwei Shi

Kovove Materialy-Metallic Materials

DOI

2016

圆柱直齿轮分区局部成形机理分析

李振东，徐淑波，任国成

《热加工工艺》

2013

AZ31镁合金等通道转角挤压工艺优化与实验研究

刘婷，徐淑波，任国成，景财年

《燕山大学学报》

2011

AZ31镁合金等通道转角挤压变形均匀性有限元分析

任国成，赵国群，徐淑波，王桂青

《中国有色金属学报》

2011

MICROSTRUCTURAL PROPERTIES AND PHASE CONSTITUENTS OF 5A06 ALUMINIUM MATRIX SURFACE COMPOSITE FABRICATED BY FRICTION STIR PROCESSING

Peng Liu, Qingyu Shi, Yuanbin Zhang, Shubo Xu

Surface Review and Letters

DOI

2009

新型非晶增强铝基复合材料的制备及组织性能

刘鹏，史清宇，边秀房，徐淑波，任国成

《焊接学报》

2007

圆形挤压件多道次等通道弯角挤压变形机理

徐淑波，张国良，任国成，王志刚

《中国有色金属学报》

2007

深杯形件冷挤压工艺分析及变薄拉深模具设计

任国成，王广春，徐淑波，蔡元兴

《锻压技术》

2006

铝型材挤压过程有限体积法数值模拟技术研究

娄淑梅，赵国群，吴向红，徐淑波，吴欣

《塑性工程学报》

2006

等通道弯角挤压（ECAP）变形机理数值模拟与实验研究

徐淑波

《山东大学》

2006

Finite element analysis and optimization of equal channel angular pressing for producing ultra-fine grained materials

Shubo Xu, Guoqun Zhao, Xinwu Ma, Guocheng Ren

Journal of Materials Processing Technology

DOI

2005

圆形挤压件等通道弯角挤压过程三维数值模拟与参数分析

徐淑波，赵国群，马新武，栾贴国

《中国机械工程》

精选作品

期刊论文

基于响应面法的上心盘预成形结构优化

Microstructural evolution mechanism and corrosion property enhancement of 2024-T6 aluminum alloy surface layer induced by ultrasonic surface rolling process

Multi-parameter ultrasonic surface rolling for synergistic enhancement of wear and electrochemical corrosion performance in 20CrMoH steel

Relation between materials, process, structure and property of metallic porous bone scaffolds fabricated by laser powder bed fusion (LPBF): a review

激光选区熔化成形多孔支架的有限元分析及性能研究

Mechanical Response and Microstructural Evolution of AZ31B Alloy Sheet in Uni-Axial Tension at Middle-Low Strain Rates and Temperatures

A review of laser additive manufacturing (LAM) aluminum alloys: Methods, microstructures and mechanical properties

高孔隙度可再生骨支架仿真与实验研究

基于向内分流和芯轴交换耦合法冷锻成形直齿圆柱齿轮的数值模拟研究

中粗WC颗粒含量对Ni-Co粗晶硬质合金微观组织及性能的影响

Study on Backward Extrusion of Large-Sized and Hollow Cup Using High-Strength Al-Zn-Mg-Cu Alloy

Finite Element Simulation of Bending Thin-Walled Parts and Optimization of Cutting Parameters

固溶及双时效处理对增材制造316L不锈钢组织性能的影响

激光能量密度对金属增材制造微观结构及力学性能的影响研究

SLM成形不同孔隙结构骨支架的仿真与实验研究

Deformation Behavior and Microstructure Evolution during Equal Channel Angular Pressing of Pure Aluminum

Ni含量对WC-Co-Ni硬质合金的力学性能和耐腐蚀性能的影响

汽车后备箱底板覆盖件成型的有限元分析

等通道弯角挤压过程有限元分析与挤压模具优化设计

纯铝圆形挤压件等通道弯角挤压微观组织与力学性能

模具几何形状对镁合金ECAP变形均匀性的影响

选择性激光熔化成形自生长多孔支架的建模与实验研究

AZ31镁合金等横截面通道角温挤压变形机理分析与实验研究

AZ31镁合金剧烈塑性变形过程分析与力学性能研究

EFFECT OF C-Mn PARTITIONING ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF TRIP STEEL

Laser nano-technology of light materials: Precision and opportunity

Study on dislocation and microstructural properties of friction stir welded joint for 2024-T4 aluminum alloys

激光选区融化成形多孔硬骨支架的建模、仿真及实验研究

Surface reinforcements of TA15 titanium alloy with laser induced Co base multiphase composites

LASER SURFACE REINFORCEMENT OF THE Ti/Al TIG WELDED JOINT

Effect of Different Isothermal Time on Microstructure and Mechanical Property of the Low-Carbon Steel Treated by Dual-Stable C-Mn Partitioning Process

Laser deposition‐additive manufacturing of Ti–B/TiC ceramics reinforced microlaminates

剧烈塑性变形对AZ31镁合金微观组织演化的影响

Effect of Solid Solution + Double Ageing on Microstructure and Properties in the Layer by Layer of the Z-Y Interface of Inconel 718 alloys Fabricated by SLM

Effect of laser shock peening on the microstructural characterization in weld nugget zone of friction stir welded 7050 aluminum alloys

Microstructure and properties in the weld surface of friction stir welded 7050-T7451 aluminium alloys by laser shock peening

数值模拟在材料成形原理中的教学应用研究——以山东建筑大学为例

Microstructure and phase transformation on the surface of Inconel 718 alloys fabricated by SLM under 1050°C solid solution + double ageing

Study on precipitated phases, dislocations and hardness in the HAZ of friction stir welded joint of 2024 aluminum alloy

圆柱直齿轮分区局部成形机理分析

AZ31镁合金等通道转角挤压工艺优化与实验研究

AZ31镁合金等通道转角挤压变形均匀性有限元分析

MICROSTRUCTURAL PROPERTIES AND PHASE CONSTITUENTS OF 5A06 ALUMINIUM MATRIX SURFACE COMPOSITE FABRICATED BY FRICTION STIR PROCESSING

新型非晶增强铝基复合材料的制备及组织性能

圆形挤压件多道次等通道弯角挤压变形机理

深杯形件冷挤压工艺分析及变薄拉深模具设计

铝型材挤压过程有限体积法数值模拟技术研究

等通道弯角挤压（ECAP）变形机理数值模拟与实验研究

Finite element analysis and optimization of equal channel angular pressing for producing ultra-fine grained materials

圆形挤压件等通道弯角挤压过程三维数值模拟与参数分析

研究方向