赵明，张晓豪，范金峰，史宇洋，姚立爽，武传松

《材料工程》

2025

钛/铝异种金属搅拌摩擦焊及其改型新工艺研究进展

石磊，张贤昆，李阳，武传松，刘小超

《材料工程》

2025

超声辅助搅拌摩擦焊接工艺与超声能场施加方法的研究进展

戴国欣，孙武魁，赵书杰，周少珍，吴明孝，高嵩，武传松，石磊

《中国有色金属学报》

2025

Fangzheng Zhou, Xinfeng Liu, Chuanbao Jia, Sen Li, Jie Tian, Weilu Zhou, Chuansong Wu

Expert Systems With Applications，Vol. 237

DOI

2024

搅拌头摆动对搅拌摩擦焊接耦合热流行为影响的三维数值模拟（英文）

宿浩，陈姬，武传松

Transactions of Nonferrous Metals Society of China

2024

宿浩，李雪，赵庆桢，陈姬，武传松

《电焊机》

2023

2A12/AZ31B异质合金超声振动辅助搅拌摩擦焊核区晶粒组织

井瑞，谭茂举，武传松，石磊

《材料工程》

2023

铝/钛异种金属超声振动强化搅拌摩擦焊接工艺试验研究

张贤昆，石磊，武传松，李胜利

《航天制造技术》

2023

螺纹对搅拌摩擦焊接材料流动和接头性能的影响

孙震，李琰，武传松，洪新伟

《金属加工(热加工)》

2023

石磊，戴翔，武传松，傅莉

《材料工程》

2021

等离子弧焊接多物理场耦合输运模型

李岩，陈岩，王领，武传松

《工程热物理学报》

2021

激光+GMAW复合热源焊接过程热-力耦合数值分析

吴向阳，宿浩，孙岩，陈姬，武传松

《焊接学报》

2021

N. A. Muhammad, Chuansong Wu, Hao-Yang Su

DOI

2021

Numerical simulation of coupled arc-droplet-weld pool behaviors during compound magnetic field assisted gas metal arc welding

Lin Wang, Ji Chen, Shi-Liang Zhang, Chuansong Wu

DOI

2021

Ji-Hui Zhou, Chuanbao Jia, M. Guo, Mao-Ai Chen, Jin-Qiang Gao, Chuansong Wu

DOI

2021

Corrigendum to “A comparison of double shielded GMAW-P with conventional GMAW-P in the arc, droplet and bead formation” [J. Mater. Process. Technol. 285 (2020) 116781]

R. Zong, Ji Chen, Chuansong Wu

DOI

2021

Strengthening Effects of Tool-Mounted Ultrasonic Vibrations during Friction Stir Lap Welding of Al and Mg Alloys

Sachin Kumar, Chuansong Wu

Metallurgical and Materials Transactions. A

DOI

2021

Ultrasonic effect on thickness variations of intermetallic compound layers in friction stir welding of aluminium/magnesium alloys

Junjie Zhao, Chuansong Wu, Hao-Yang Su

DOI

2021

Chunliang Yang, Chuansong Wu, Song Gao

DOI

2021

Numerical Analysis of Keyhole and Weld Pool Behaviors in Ultrasonic-Assisted Plasma Arc Welding Process

Jun-Nan Qiao, Chuansong Wu, Yong-Feng Li

Materials

DOI

2021

Acoustic effect on the tensile properties and metallurgical structures of dissimilar friction stir welding joints of Al/Mg alloys

Junjie Zhao, Chuansong Wu, Hao-Yang Su

DOI

2021

Process Stability, Microstructure and Mechanical Properties of Underwater Submerged-Arc Welded Steel

Mao-Fu Zhang, Yan-Fei Han, Chuanbao Jia, Shengfa Dong, S. Maksimov, Chuansong Wu

Metals

DOI

2021

2020

Underwater Pulse-Current FCAW - Part 1: Waveform and Process Features

Chuanbao Jia, Jun-Fei Wu, Yan-Fei Han, Yong Zhang, Qingyuan Yang, Chuansong Wu

DOI

2020

Optimizing the tool pin with three flats in friction stir welding of aluminum alloy

Hao-Yang Su, L. Xue, Chuansong Wu

The International Journal of Advanced Manufacturing Technology

DOI

2020

A Convenient Unified Model to Display the Mobile Keyhole-Mode Arc Welding Process

Yan Li, Chen Su, Ling Wang, Chuansong Wu

DOI

2020

Stirring effect of the rotating arc on the molten pool during non-axisymmetric tungsten NG-GTAW

B. Wei, Chuanbao Jia, Wei Wu, C. Fang, Chuansong Wu

DOI

2020

Sachin Kumar, Chuansong Wu

DOI

2020

Progress in Thermomechanical Analysis of Friction Stir Welding

B. Meyghani, Chuansong Wu

Chinese Journal of Mechanical Engineering

DOI

2020

Three-Dimensional Reconstruction of Welding Pool Surface by Binocular Vision

Zunan Gu, Ji Chen, Chuansong Wu

Chinese Journal of Mechanical Engineering

DOI

2020

吴向阳，徐剑侠，高学松，武传松

《中国激光》

2019

焊接与连接领域科学基金资助浅析与发展趋势

赖一楠，武传松，李宏伟，曹健

《焊接学报》

2019

Bo Zhao, Ji Chen, Chuanbao Jia, Chuansong Wu

DOI

2018

An evolutionary keyhole-mode heat transfer model in continuous plasma arc welding

Yan Li, Yanhui Feng, Xin-Xin Zhang, Chuansong Wu

DOI

2018

Numerical analysis of the ultrasound induced arc pressure increment in plasma arc welding

Yong-Feng Li, Chuansong Wu, Mao-Ai Chen

Journal of Physics D: Applied Physics

DOI

2018

Numerical analysis of weld pool behaviors in plasma arc welding with the lattice Boltzmann method

Junjie Cai, Yanhui Feng, Jun-Jie Zhou, Yan Li, Xin-Xin Zhang, Chuansong Wu

DOI

2018

Determination of heat generation by correlating the interfacial friction stress with temperature in friction stir welding

Z. Sun, Chuansong Wu, Sachin Kumar

DOI

2018

Yan Li, Yanhui Feng, Xin-Xin Zhang, Chuansong Wu

DOI

2018

Numerical analysis of heat transfer and fluid flow characteristics and their influence on bead defects formation in oscillating laser-GMA hybrid welding of lap joints

X.-S. Gao, Chuansong Wu, S. Goecke

The International Journal of Advanced Manufacturing Technology

DOI

2018

Single CCD-based sensing of both keyhole exit and weld pool in controlled-pulse PAW

Guo-Kai Zhang, Chuansong Wu, Ji Chen

Welding in the World

DOI

2018

丁伟，武传松

《精密成形工程》

2017

Xiaoxi Liu, Chuanbao Jia, Chuansong Wu, G.K. Zhang, Jinqiang Gao

Journal of Materials Processing Technology

DOI

2017

Visual sensing of the weld pool geometry from the topside view in keyhole plasma arc welding

Guo-Liang Qin, Chuansong Wu

2016

Subgrain formation in ultrasonic enhanced friction stir welding of aluminium alloy

G. Padhy, Chuansong Wu, Shan-Min Gao

DOI

2016

Influence of shielding gas on undercutting formation in gas metal arc welding

R. Zong, Ji Chen, Chuansong Wu, G. Padhy

DOI

2016

Heat input and metal transfer influences on the weld geometry and microstructure during underwater wet FCAW

Yong Zhang, Chuanbao Jia, Bo Zhao, Jia-Kun Hu, Chuansong Wu

DOI

2016

Integrated Modeling of Transport Phenomena in Keyhole Welding with Plasma Arc

Yan Li, Yanhui Feng, Ya-Fei Li, Xin-Xin Zhang, Chuansong Wu

DOI

2014

Energy propagation in plasma arc welding with keyhole tracking

Yan Li, Yanhui Feng, Xin-Xin Zhang, Chuansong Wu

DOI

2014

Effect of external magnetic field on weld pool flow conditions in high-speed gas metal arc welding

Chuansong Wu, Fengzhao Yang, Jinqiang Gao

Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture

DOI

2014

Numerical analysis of heat generation and temperature field in reverse dual-rotation friction stir welding

Chuansong Wu, Y.-S. Huo

DOI

2013

Measurement of Dynamic Keyhole Behaviors in Controlled-pulse Plasma Arc Welding

Chuansong Wu

DOI

2013

An improved simulation of heat transfer and fluid flow in plasma arc welding with modified heat source model

Yan Li, Yanhui Feng, Xin-Xin Zhang, Chuansong Wu

DOI

2013

Simultaneous measurement of tool torque, traverse force and axial force in friction stir welding

Hao-Yang Su, Chuansong Wu, A. Pittner, M. Rethmeier

DOI

2013

Xiao-Chao Liu, Hao-Ting Zhang, Chuansong Wu

2012

Y.-S. Huo, Chuansong Wu, Mao-Ai Chen

DOI

2011

Chuansong Wu, Wen-Bin Zhang, Zhi-Yun Zhang

Chuansong Wu

Transactions of the China Welding Institution

2010

受控脉冲穿孔等离子弧焊小孔热滞后效应的研究

贾传宝，武传松，高进强

《金属学报》

2010

等离子弧定点焊熔池穿孔过程的数值分析

王小杰，武传松，陈茂爱

《金属学报》

2010

6013—T4铝合金薄板搅拌摩擦焊热输入对焊缝成形及组织性能的影响

秦国梁，张坤，张文斌，武传松

《焊接学报》

2010

Numerical Analysis of Forming Mechanism of Hump Bead in High Speed GMAW

Ji Chen, Chuansong Wu

DOI

2010

Chuansong Wu, Jin-Qiang Gao

2009

Visualization of hump formation in high-speed gas metal arc welding

Chuansong Wu, L.-M. Zhong, Jin-Qiang Gao

DOI

2009

Guo-Xiang Xu, Chuansong Wu

DOI

Mao-Ai Chen, Chuansong Wu, Z. Zou

DOI

2006

Chuansong Wu, H.-G. Wang, Yuming Zhang

2006

Mao-Ai Chen, Chuansong Wu, Min Yang, Yin-Ming Tang, Renjie Wu

2004

Analysis of excited droplet oscillation and detachment in active control of metal transfer

Chuansong Wu, Mao-Ai Chen, S.-K. Li

DOI

2004

Chuansong Wu, Fengjie Yan

Modelling and Simulation in Materials Science and Engineering

DOI

2003

Vision-based measurement of weld pool geometry in constant-current gas tungsten arc welding

Chuansong Wu, Jinqiang Gao, X F Liu, Y H Zhao

Jinqiang Gao, Chuansong Wu

TIG焊接熔池中的流体流动及传热过程的数值模拟

武传松，陈定华，吴林

《焊接学报》

1988

A New Type of TIG Welding Power Source with Artificial Intelligence

Qinghong Xu, Chuansong Wu, Dong-Qing Li

DOI

1986

TIG焊可控硅整流电源微机控制系统的研制

徐庆鸿，武传松，吴林，陈定华

《焊接》

A novel 3D numerical model coupling droplet transfer and arc behaviors for underwater FCAW

Junliang Yang, Shichang Xu, Chuanbao Jia, Yan-Fei Han, Sergii Maksymov, Chuansong Wu

International journal of thermal sciences

DOI

精选作品

期刊论文

机器学习在搅拌摩擦焊接与增材制造领域的应用现状与展望

搅拌摩擦辅助电弧增材制造热力耦合过程的数值模拟（英文）

超声振动对镁/铝异质合金搅拌摩擦搭接焊接头界面组织演变的影响

钢-铝网状双金属复合材料的熔化-固相协同增材制备工艺

Fiberglass-backed GTAW for large-diameter 304L pipeline girth welds: Microstructural evolution, interfacial oxidation and integrated mechanical-corrosion performances

Travel speed-dependent process stability and forming-microstructure-property relationships in cold metal transfer-based directed energy deposition of Al-Zn-Mg-Cu alloy

Geometry-driven phenomenological model of texture distribution in magnesium alloy friction stir welds: Insights into deformation pathways and strain localization

Arc characteristics and metal transfer behavior on weld quality in rotating arc ultra-narrow gap GTAW of thick plates

Interfacial bonding mechanism and microstructural evolution in additive friction stir deposition of Ti/Al dissimilar alloys via substrate micro-grooving

Effect of aging heat treatment on microstructure and mechanical properties of electron beam welded Ti-3Al-5Mo-4Cr-2Zr-1Fe metastable β titanium alloy joints

Mechanism investigation on residual stress relief during primary plus secondary local PWHT in pressure vessel considering the effect of structural dimensions and materials

A residual stress control strategy with heat treatment in cylinder girth weld of pressure vessels: Effect of heating sequence and frequency

Microstructure and wear-corrosion behavior of EH40 low-carbon steel coatings via underwater submerged arc cladding

Synergistic regulation of alternating magnetic field and torch tilt angle for high-precision fabrication of self-supporting inclined aluminium alloy components via CMT-WAAM

Unveiling the impact of ultrasonic frequency pulse current assisted-MIG welding on the microstructure, mechanical properties, and corrosion behavior of 316L stainless steel

Solid state friction-based additive manufacturing of heterogeneous metallic composites: Recent progress and future prospects

Unveiling the weld pool dynamic mechanisms in ultrasonic pulse current-assisted underwater wet flux-cored arc welding via multiphysics simulations and experiments

A novel constitutive model for Al/Mg mixtures in dissimilar friction stir welding

Failure mechanisms in PWHT AA5052–AZ31 friction stir welded joints: Role of solid solution loss and intermetallic compounds evolution

A novel tri-coil composite magnetic field-assisted MIG welding technique for 7075 aluminum alloys

In-situ visualization and adhesive regulation of gas-induced weld pool dynamics in underwater submerged arc welding

Intelligently predicting the keyhole feature variables by a temporal regression model in K-PAW with real-time deployment

Phase-field analysis of ultrasonic vibration-suppressed intermetallic compound growth in dissimilar Al/Mg friction stir welding

Influence of heat input on droplet transfer process, microstructure, and mechanical properties during underwater submerged arc welding

Unveiling the bimetallic potential: Microstructure-mechanics of CMT-WAAM Inconel-stainless steel

Unveiling the role of deposition parameters on the in-situ microstructure, mechanical response, and corrosion performance of additive friction stir deposited AA5083 alloy

Influence of post-weld heat treatment on the microstructural evolution and corrosion behavior of dissimilar AA5052/AZ31 joints made by friction stir welding

Anisotropic tensile and fatigue crack growth behavior of cold metal transfer overlay clads of Inconel 625® superalloy

Experimental and numerical study on the influence of wire feeding rate on the metal transfer, molten pool behavior, and surface morphology in direct energy-deposited Al‑Zn‑Mg‑Cu alloy

Microstructural heterogeneity and nanomechanical–tribological response of additive friction stir deposited AA5083 alloy

Interfacial formation mechanism of T-phase and S-phase in ultrasonic-assisted Al/Mg FSW

超常热加工过程中热传导理论的演化与应用：从傅里叶导热模型到非傅里叶导热模型

钛/铝异种金属搅拌摩擦焊及其改型新工艺研究进展

超声辅助搅拌摩擦焊接工艺与超声能场施加方法的研究进展

钛合金与铝锂合金异种搅拌摩擦搭接焊:组织与力学性能（英文）

State-of-the-art review of additive friction stir deposition: microstructural evolution, machine learning applications, and future directions

Grain morphology characteristics and formation mechanism of wire-arc additive manufactured 316L stainless steel

Tailoring microstructure and strength-ductility synergy in AZ91D/ZrO₂ magnesium matrix composite by dual eccentric-pin tool friction stir processing

Role of interfacial microstructure and intermetallic compounds on mechanical and electrochemical corrosion behaviour of AA5052–AZ31 dissimilar FSW joints

Synergistic influence of rotational and travel speeds on microstructure and property in Al Mg alloy via Additive Friction Stir Deposition

Tailoring microstructure, hardness and wear behavior of U75V rail steel via friction stir processing

Effect of Ultrasonic Frequency Pulse Current on Underwater Wet Flux-Cored Arc Welding Process of Low Carbon Steel

Synergistic enhancement of energy efficiency and mechanical properties in friction stir welding via ultrasonic vibration

Unveiling the microstructure and advanced bio-tribological behavior of Y₂O₃/HA, HA/ZrO₂, and Y₂O₃/ZrO₂ reinforced AZ91D surface composites via friction stir processing

Effect of microstructure and local intermetallic compounds formation on corrosion behaviour of friction stir welded AA5052/AZ31 alloys

Microstructural evolution and strengthening mechanisms in multi-pass friction stir additive manufacturing of Al6061-Al5083 dissimilar builds: A study of overlapping thermo-mechanical zones

Interface microstructural and mechanical properties of Al/Mg bimetal composites fabricated by friction stir additive manufacturing

Multi-scale simulation of thermal processes and microstructure evolution in wire arc additive manufacturing of 921A steel

Elucidating the Microstructure and Dislocation Mechanism at TMAZ-NZ/HAZ Interfaces of Nanofluid-Cooled Friction Stir-Welded AA6082-T6 Alloys

The Role of Ni Interlayer in the Microstructural Properties of Dissimilar Ultrasonic-Assisted Al/Mg Alloy Friction Stir Welds

Unveiling the mechanism of ultrasonic vibration on suppression of intermetallic compound growth in Al/Mg dissimilar friction stir welding

Temperature heterogeneity characteristics in dissimilar friction stir welding between aluminum alloy and magnesium alloy: insights from computational fluid dynamics simulations

Dissimilar friction stir welding between AZ31 magnesium alloy and pure copper: Evolution mechanism from macro to micro scales

Numerical study of friction stir welding with LuGre friction model

A comparative investigation on microstructural, mechanical, and corrosion behavior of friction stir processed surface composite of magnesium alloy reinforced with nanoparticles

Effect of Elastic Strain Energy on Dynamic Recrystallization During Friction Stir Welding of Dissimilar Al/Mg Alloys

Depth prediction of plastic vortex toward vortex flow-based friction stir additive manufacturing

Elucidation for the Correlation Between Material Flow and Intermixing Behavior and Joint Performances in Friction Stir Welding of Al/Cu Dissimilar Alloys

Towards Sustainability: Critical Insights into Solid-State Joining Processes for Developing Lightweight Hybrid Structures

Investigating the relationship of process parameter, heat-mass transfer and joint strength in Mg/Al friction stir lap welding via experiments, machine learning and numerical analysis

Numerical investigation of arc and droplet dynamics in local dry underwater welding under varying ambient pressures

Significance of plate position on the coupled thermal and material flow behavior in friction stir welding of dissimilar aluminum alloys

Ultrasonic vibration enhanced friction stir welding of titanium to aluminum

Horizontal rotating arc narrow-gap GTAW of thick Ti–6Al–4V alloy

Depositing Al–Zn–Mg–Cu alloy with different positive electrode/negative electrode ratios of CMT advance process

Experimental and simulation research on the dynamic behavior of arc and bubble in ultrasonic frequency pulse current-assisted underwater wet flux cored arc welding

Pore suppression and performance improvement mechanisms in wire-arc directed energy deposition of 7075 alloy

Experimental and numerical analysis of residual stress relief mechanisms of local postweld heat treatment in pressure vessels

Ultrasonic vibration enables the in-situ control of microstructure and mechanical properties of Al/Cu dissimilar friction stir welded joint

Dynamic behavior of ultrasonic frequency pulsed current-assisted gas metal arc welding

Unified CNN-LSTM for keyhole status prediction in PAW based on spatial-temporal features

搅拌头摆动对搅拌摩擦焊接耦合热流行为影响的三维数值模拟（英文）

超声振动对2195铝锂合金搅拌摩擦焊接头显微组织与力学性能的影响（英文）

Role of intermetallic compounds on interfacial bonding and strain hardening capacity of dissimilar friction stir welded AA5052-AZ31 alloys

Better generalization of penetration/keyhole status prediction model in plasma arc welding based on UDAs: A preliminary work

Investigating the influence of biodegradable nanofluid process cooling on dynamic recrystallization and grain microstructure in friction stir welding of AA6082 alloy

Microstructural, mechanical, and corrosion behavior of ZrO2, HA, and Y2O3 hybrid reinforced AZ91D alloy surface composites fabricated through FSP route

Microstructure evolution and mechanical properties of ZK61 magnesium alloy fabricated via friction stir additive manufacturing