王丙兴

2026

热轧中厚板轧后冷却终冷温度预测研究进展

《冶金自动化》

2026

晶粒细化对PEMFC双极板用含N不锈钢力学性能与耐蚀性的影响

《金属热处理》

DOI

2026

含N高Cr奥氏体不锈钢在PEMFC阴极环境中腐蚀行为研究

《轧钢》

DOI

2026

高纯钛箔双极板单道次冲压关键参数影响规律研究

《材料开发与应用》

2026

Construction of Ternary Gallium-Based Liquid Metal/CuO-NiO Nanocomposite and Photocatalytic Degradation of Methylene Blue.

Langmuir

DOI

2025

加热炉出钢过程钢坯定位的NDS-yolov8目标检测算法

《轧钢》

2025

退火温度对质子交换膜燃料电池钛合金薄板组织及性能影响研究

《材料开发与应用》

2025

固溶温度对S32707特超级双相不锈钢力学性能及耐蚀性的影响

《轧钢》

DOI

2025

A strategy for constructing defect-rich perovskites for lean methane oxidation

Materials Chemistry and Physics

DOI

2025

Dynamic phase transition and dynamic recrystallization of Ti-B25 high-strength titanium alloy during high-temperature deformation

Journal of Alloys and Compounds

DOI

2025

Synergy enhancement mechanism of strength and plasticity for superalloy foil by a strategy combining cryogenic and room-temperature rolling

Materials Characterization

DOI

2024

基于贝叶斯优化LightGBM的热轧中厚板终冷温度预测

《冶金自动化》

2024

退火温度对GH3600合金箔材组织与性能的影响

《精密成形工程》

2024

工程机械用钢前沿生产技术(一)

《轧钢》

2024

退火温度对高纯钛冷轧薄板组织和力学性能的影响

《材料开发与应用》

2024

Effect of Anions on Deformation of Gallium-Based Liquid Metal in Solution.

Langmuir

DOI

2024

Study on uranium ion adsorption property of porous glass modified with amidoxime group

Environmental science and pollution research international

DOI

2024

An Acidic Media Pump with Ga‐Based Liquid Metal

Advanced Functional Materials

DOI

2024

New insights into wax deposition challenges: Experimental investigation across varied pipeline curvatures

Experimental Thermal and Fluid Science

DOI

2024

Facile One-Pot Preparation of Organotin-Oxometalate Polymers for Efficient Synthesis of Dimethyl Carbonate from CO2

Industrial & Engineering Chemistry Research

DOI

2024

The integrated effect of grain configuration and δ phase on micro-scaled mechanical stability of nickel-based superalloy foil

Journal of Alloys and Compounds

DOI

2024

Experimental Study on Superplastic Forming for Inconel 718 Alloy Bipolar Plate

International Journal of Precision Engineering and Manufacturing

DOI

2024

The influence of Σ3 grain boundary and δ phase competition mechanisms on size dependence and micro-deformation behavior of Inconel 718 foil

Materials Science and Engineering A

DOI

2024

Chemical surface modification for the preparation of MgO cladding to enhance magnetic properties of Fe-Si-Nb-B-Cu nanocrystalline soft magnetic composites

Journal of Alloys and Compounds

DOI

2024

Establishment and application of an internal-variable-based constitutive model for the superplastic deformation of Inconel 718 alloy

Materials Science and Engineering A

DOI

2024

Evolution of Complex Oxide Inclusions During the Smelting Process of Oxide Metallurgical Steel and Their Effect on Acicular Ferrite Nucleation

Metallurgical and Materials Transactions A

DOI

2023

海上风塔用钢国内外研究现状及发展趋势

《轧钢》

DOI

2023

结构参数对扇形喷嘴的射流性能影响研究

《宽厚板》

2023

Enhanced Degradation of Quinoline in Three-Dimensional Electro-Fenton System Through NiCo2S4/g-C3N4 Particles

Arabian Journal of Chemistry

DOI

2023

Impact of Mo/Ni alloying on microstructural modulation and low-temperature toughness of high-strength low-alloy steel

Journal of Iron and Steel Research International

DOI

2023

Preparation and magnetic properties of high DC-bias performance Fe-Si-Nb-B-Cu/carbonyl iron chip inductors

Materials Today Communications

DOI

2023

Study on the mechanism of AF nucleation induced by complex oxide inclusions after LF refining in oxide metallurgical steel

Materials Characterization

DOI

2023

Magnetic Properties of High DC Bias Performance Fe-Si-B-C-Cr Amorphous Soft Magnetic Composites

ACS Applied Electronic Materials

DOI

2023

Study on superplastic behaviour of cold rolled Inconel 718 alloy with δ phase dispersion distribution

Materials Technology

DOI

2023

Hot deformation behavior and dynamic recrystallization mechanism of Ti2ZrTa0.75 refractory complex concentrated alloy

Materials Characterization

DOI

2023

Magnetic properties and thermal stability of Fe-based amorphous/carbonyl iron soft magnetic composites

Journal of Materials Science Materials in Electronics

DOI

2023

Mechanism of adding carbonyl iron powder to enhance the magnetic properties of Fe-Si-B-Cu-Nb nanocrystalline soft magnetic composites

Journal of Alloys and Compounds

DOI

2022

基于贝叶斯优化XGBoost模型的热轧中厚板终冷温度预测

《轧钢》

2022

均匀化热处理及冷轧退火对Mg-9Li-2Al-1Y合金组织与耐腐蚀性能的影响

《材料热处理学报》

2022

退火温度对轧制变形镁锂合金组织与力学性能的影响

《金属热处理》

2022

回火温度对500 MPa级海工钢组织性能的影响

《钢铁研究学报》

2022

基于机器视觉的钢板物料跟踪系统研究与应用

《轧钢》

2022

Development of a new high-performance visible-light photocatalyst by modifying tin disulfide with cyclized polyacrylonitrile

Materials letters (General ed.)

DOI

2022

Heterogeneous electro-Fenton using three-dimension Fe-Co-Bi/kaolin particle electrodes for degradation of quinoline in wastewater

Environmental science and pollution research international

DOI

2022

Study on Teaching Reform of Professional English for Chemistry and Chemical Engineering in Ordinary Colleges

Daxue Huaxue

DOI

2022

Interface enhancement effect of hierarchical In2S3/In2O3 nanoflower heterostructures on NO2 gas sensitivity

Applications of Surface Science

DOI

2022

Effect of Oxide Metallurgy Technology on Mechanical Properties and Hydrogen‐Induced Cracking Susceptibility of High‐Strength Low‐Alloy Steel

steel research international

DOI

2022

In situ observation of phase transformations in the partially melted zone of HSLA offshore steel during simulated welding process

Materials Today Communications

DOI

2022

Superplastic deformation behavior of cold-rolled Inconel 718 alloy at high strain rates

Journal of Materials Processing Technology

DOI

2022

Effect of different strains on acicular ferrite and martensite-austenite islands in oxide metallurgy steel

Journal of Materials Research and Technology

DOI

2022

Effect of Welding Heat Input on Microstructure and Properties of Coarse-Grained HAZ of 500 MPa High-Strength Low-Alloy Steel

Transactions of the Indian Institute of Metals

DOI

2022

High-temperature deformation behavior and microstructural evolution of NbZrTiTa refractory high entropy alloy

Journal of Alloys and Compounds

DOI

2021

定向凝固DZ4125柱晶高温合金晶粒生长过程组织演化及其竞争生长行为

《稀有金属材料与工程》

2021

Impact of Active Chlorines and •OH Radicals on Degradation of Quinoline Using the Bipolar Electro-Fenton Process

Water

DOI

2021

Numerical analysis on heat and mass transfer of the planar membrane dehumidifier

Numerical Heat Transfer, Part A Applications

DOI

2021

The superplasticity improvement of Inconel 718 through grain refinement by large reduction cold rolling and two-stage annealing

Materials Science & Engineering: A

DOI

2021

Smart Janus Titanium Mesh Used as a Diode for Both Liquid Droplet and Air Bubble Transport

New Journal of Chemistry

DOI

2020

特厚钢板差温轧制工艺的研究与应用

《宽厚板》

2020

航空齿轮钢16Cr3NiWMoVNbE的真空低压渗碳

《材料研究学报》

2020

道次间冷却工艺下EH47船板钢表层往复相变行为的研究

《轧钢》

DOI

2020

Effect of Nanoparticle Type and Surfactant on Heat Transfer Enhancement in Spray Cooling

DOI

2020

Numerical Simulation of Grain Growth of Directionally Solidified DZ4125 Alloy under Varied Blade Orientations

MATERIALS TRANSACTIONS

DOI

2019

氧化物冶金工艺对EH36钢HAZ组织性能的影响

《钢铁研究学报》

DOI

2019

双辊薄带连铸制备Ti-43Al合金板材及其在热处理过程中的显微组织表征（英文）

Transactions of Nonferrous Metals Society of China

2019

氧化物冶金在大线能量焊接用钢中的应用

《钢铁》

DOI

2019

道次间冷却工艺对轧制力的影响分析

《上海金属》

2019

A study of heat transfer through the heavy plate thickness under multi-slit jet impingement

Heat and Mass Transfer

DOI

2019

Microstructure characteristics of Ti–43Al alloy during twin-roll strip casting and heat treatment

Transactions of Nonferrous Metals Society of China

DOI

2019

Development and Application of Thermo-mechanical Control Process Involving Ultra-fast Cooling Technology in China

ISIJ International

DOI

2018

轧制道次间插入冷却对特厚钢板组织与性能的影响

《东北大学学报(自然科学版)》

2018

合金元素对大线能量焊接用钢组织性能的影响

《钢铁》

2018

道次间冷却工艺对厚板芯部变形及组织的影响

《轧钢》

2018

“温控-形变”轧制工艺对厚板变形渗透性的影响

《轧钢》

2018

Flow Stress Prediction and Hot Deformation Mechanisms in Ti-44Al-5Nb-(Mo, V, B) Alloy

Materials

DOI

2018

Inclusion Evolution Behavior of Ti-Mg Oxide Metallurgy Steel and Its Effect on a High Heat Input Welding HAZ

Metals

DOI

2018

Effect of Ti–Mg–Ca treatment on properties of heat-affected zone after high heat input welding

Journal of Iron and Steel Research International

DOI

2017

道次间冷却对厚板控制轧制变形行为的影响

《钢铁》

2017

冷却工艺对Q345钢轧制过程中金属变形的影响

《上海金属》

2017

Microstructure and Mechanical Properties of Nb-B bearing Low Carbon Steel Plate: Ultrafast Cooling versus Accelerated Cooling

Journal of Wuhan University of Technology(Materials Science)

2017

中厚板轧后冷却圆形喷嘴射流冲击行为分析

《轧钢》

2016

基于超快冷的控轧控冷装备技术的发展

《中国冶金》

2016

中厚板在线冷却过程冷却参数数据分析

《轧钢》

2016

韶钢Q345B合金减量工艺研究

《南方金属》

2016

超快冷条件下Mn-Nb-B系低碳贝氏体高强钢组织与性能研究

《材料工程》

2016

Heat transfer characteristic research during jet impinging on top/bottom hot steel plate

International Journal of Heat and Mass Transfer

DOI

2016

Heat transfer characteristics during jet impingement on a high-temperature plate surface

Applied Thermal Engineering

DOI

2016

A Novel Variable Scale Grid Model for Temperature Self‐Adaptive Control: An Application on Plate Cooling Process after Rolling

steel research international

DOI

2015

基于ANSYS Fluent的超快冷设备管路的优化设计

《中国冶金》

2015

The Relationship Between Microstructural Evolution and Mechanical Properties of Heavy Plate of Low-Mn Steel During Ultra Fast Cooling

Metallurgical and Materials Transactions A

DOI

2015

Self-learning factor prediction of the heat transfer coefficient based on a dynamic fuzzy neural network for ultra-fast cooling

Metallurgical Research & Technology

DOI

2014

The Effect of Jet Angle and Initial Plate Temperature during Jet Impingement Heat Transfer Process in Ultra‐Fast Cooling Technology

steel research international

DOI

2014

An On-line Finite Element Temperature Field Model for Plate Ultra Fast Cooling Process

Journal of Iron and Steel Research International

DOI

2013

Fluid flow characteristics of single inclined circular jet impingement for ultra-fast cooling

Journal of Central South University

DOI

2012

中厚板控制冷却系统中的实测温度处理方法

《东北大学学报(自然科学版)》

2012

ADCOS-PM工艺下中厚板冷却速度控制方法

《东北大学学报(自然科学版)》

2012

Development and industrial application of ultra-fast cooling technology

Science China Technological Sciences

DOI

2011

Calculation Method of Optimal Speed Profile for Hot Plate During Controlled Cooling Process

Journal of Iron and Steel Research International

DOI

2010

A kind of plate laminar cooling strategy with high response and steady precision

Journal of Iron and Steel Research International

DOI

2008

中厚板冷却路径控制系统的开发

《东北大学学报(自然科学版)》

2008

中厚板控制冷却系统的水流量控制技术

《东北大学学报(自然科学版)》

2008

Cooling efficiency of laminar cooling system for plate mill

Journal of Iron and Steel Research International

DOI

2008

Application of neural network to prediction of plate finish cooling temperature

Journal of Central South University of Technology

DOI

2007

中厚板控冷过程的温度-应力耦合计算与翘曲分析

《东北大学学报(自然科学版)》

2024

PEMFCs双极板高耐蚀铁素体不锈钢腐蚀行为研究

《2024年（第四届）中国不锈钢科技发展论坛》

DOI

2019

Ti-Mg氧化物冶金钢中夹杂物演变行为研究

《第十二届中国钢铁年会论文集——6.先进钢铁材料》

DOI

2024

Enhancing the Corrosion Resistance of Ferritic Stainless Steel Bipolar Plates in Simulated Pemfc Cathodic Environments by Surface Enriched Cr2o3

SSRN Electronic Journal

DOI