岳新艳｜东北大学｜学者主页

2026

极端服役温度对增材制造氮化硅微观组织和强度的影响

滕家琛，李乔磊，肖亮，岳新艳，邱宇翔，周璇，朱福林，许滔，曾小锋，梁静静，周亦胄，李金国

《航空材料学报》

2026

网络结构WC-ZrO2陶瓷复合材料的制备、组织与性能

秦肇伯，茹红强，岳新艳

《中国陶瓷工业》

DOI

2026

光固化增材制造陶瓷型芯缺陷分析及调控机制研究进展

周璇，李乔磊，张婷婷，岳新艳，梁静静，李金国

《材料工程》

2026

Mechanistic study on the modulation of SiC powder morphology using NiCl2

Yiyang Liu, Zhaobo Qin, Xinyan Yue, Hongqiang Ru, Lu Tang

Ceramics International

DOI

2026

Effect of ZrC/TiC molar ratio on the microstructure and properties of pressureless sintered B4C-(Zr,Ti)B2-graphite composites

Lu Tang, Yiyang Liu, Jiaxing Li, Xinyan Yue

Journal of the European Ceramic Society

DOI

2026

High-strength TiB2-CoCrW cermets fabricated by mechanical alloying and low-temperature pressureless sintering

Tao Chen, Shaowen Huang, Xuejiao Sun, Yichen Xu, Shihao Sun, Xinyan Yue, Lechen Zhang, Zhaoyang Li

Ceramics International

DOI

2026

Study on coating process and properties of SiAlON/cBN composites prepared by SiO2-coated cBN particles

Xiuyi Chen, Kanglei Cao, Hanze Liang, Xinyan Yue

Ceramics International

DOI

2025

分散剂对光固化3D打印陶瓷浆料分散性影响的研究进展

樊军，李乔磊，岳新艳，梁静静，李金国

《中国材料进展》

2025

氮化硅陶瓷在航空航天领域的研究进展及应用

滕家琛，李乔磊，梁静静，岳新艳，张朝威，刘砚飞，谭海兵，李金国

《航空制造技术》

DOI

2025

SiC whisker enhanced reaction bonded boron carbide composites by silicon infiltration: The effect of SiC whisker contents

Suting Yao, Nachuan Zou, Li Zhang, Li Zhang, Zhongbin Ma, Qian Feng Xia, Jia Li, Jiaxing Li, Cuiping Zhang, Hongqiang Ru, Wei Wang, Xinyan Yue

Ceramics International

DOI

2025

Co-enhancement of vat photopolymerized 3D printed silica-based ceramic cores by cristobalite phase transformation and in-situ ZrSiO4 formation

Jiachen Teng, Qiaolei Li, Xuan Zhou, Yuxiang Qiu, Jingjing Liang, Xinyan Yue, Jinguo Li

Journal of Alloys and Compounds

DOI

2025

Modulating the morphology of β-SiC powders prepared by vacuum carbothermal reduction with ferric chloride

Yiyang Liu, Zhaobo Qin, Xinyan Yue, Hongqiang Ru, Jun Ye, Qian Xia, Pengfei Zhang, Jiaxing Li, Zhongbin Ma, Suting Yao

Ceramics International

DOI

2025

Cooperative control of sintering shrinkage and strength of stereolithography 3D printed silica-based ceramic cores

Shengqi Liu, Qiaolei Li, Boyang Qu, Xinzhi Liang, Yuxiang Qiu, Xinyan Yue, Jingjing Liang, Jinguo Li

Ceramics International

DOI

2025

Controlling the cristobalite content, microstructure, and properties of vat photopolymerization 3D printed SiO2-based ceramic cores by doping Fe2O3

Boyang Qu, Qiaolei Li, Shengqi Liu, Xinzhi Liang, Yuxiang Qiu, Xinyan Yue, Jingjing Liang, Jinguo Li

Ceramics International

DOI

2025

Effect of polysilazane on microstructure and properties of Al2O3-based ceramic core for 3D printing

Shengqi Liu, Rui-long Yu, Wenjun Dong, Qiaolei Li, Ang Li, Wei Liu, Xi-he Liu, Xinyan Yue, Jingjing Liang, Jinguo Li

China Foundry

DOI

2025

Mitigating anisotropy of vat photopolymerization 3D printing Al2O3-based ceramic cores through zircon addition

Bo-yang Qu, Rui-long Yu, Tian‐Chi Chen, Qiaolei Li, Ang Li, Wei Liu, Xi-he Liu, Xinyan Yue, Jingjing Liang, Jinguo Li

China Foundry

DOI

2025

Effect of metal combined with non-metallic additives on the microstructure and properties of B4C ceramics via pressureless sintering

Jiaxing Li, Xiuyi Chen, Lu Tang, Xinyan Yue, H. Ru

International Journal of Refractory Metals and Hard Materials

DOI

2024

烧结温度对无压液相烧结TiN陶瓷组织与性能的影响

叶凌云，王亚军，叶军，宋海林，张翠萍，岳新艳，茹红强

《机械工程材料》

2024

Preparation and properties of YAG@TiC-ZrO2 conductive composite ceramic with a network structure

Zhaobo Qin, YiYang Liu, Zhongbin Ma, Jiaxing Li, Hongqiang Ru, Xinyan Yue

Journal of Alloys and Compounds

DOI

2024

Effect of TiC addition on microstructure and properties of network structured TiC–ZrO2 composite conductive ceramics

Zhaobo Qin, Yajun Wang, Jun Ye, Hailin Song, Yuqi Li, Xinyan Yue, Hongqiang Ru

Ceramics International

DOI

2024

Microstructure and properties of bilayered B4C-based composites prepared by hot-pressing

Yajun Wang, Jiaxing Li, Xinyan Yue

Ceramics International

DOI

2024

Design and formation mechanism of in-situ synthesis YAG sintered necks in stereolithography 3D printed Al2O3-based ceramic cores

Mingda Huo, Qiaolei Li, Xinyan Yue, Jingjing Liang, Jinguo Li

Ceramics International

DOI

2024

Study on the microstructure and properties of TiB2-CoCrFeNiW0.2 metal ceramic composites prepared by pressureless sintering

Tao Chen, Jiaxing Li, Decai Pang, Shihao Sun, Xinyan Yue, Hongqiang Ru

Journal of Materials Research and Technology

DOI

2023

利用SiO2合成高纯亚微米级SiC粉体的研究进展

叶军，岳新艳，茹红强，张翠萍

《陶瓷》

2023

钛酸钡——氧化锆陶瓷复合材料的组织与性能研究

宋海林，王亚军，叶凌云，叶军，岳新艳，茹红强

《陶瓷》

2023

TiC含量对无压烧结TiC-Al2O3导电陶瓷复合材料微观结构与性能的影响

张进，黄云涛，岳新艳，张翠萍，茹红强

《机械工程材料》

2023

Microstructure and properties of SrTiO3/ZrO2 ceramic composites prepared through pressureless sintering

Yajun Wang, Jun Ye, Jiaxing Li, Hailin Song, Lingyun Ye, Xinyan Yue, Hongqiang Ru

Ceramics International

DOI

2023

High solid loading, low viscosity stereolithography 3D printing ceramic cores slurry

Jun Fan, Qiaolei Li, Funan Jin, Kun Yang, Yuxiang Qiu, Xinyan Yue, Jingjing Liang, Jinguo Li

Ceramics International

DOI

2023

The morphology regulating effect of cobalt acetate on the vacuum carbothermal synthesis of β-SiC powder

Jun Ye, Yajun Wang, Hongqiang Ru, Xinyan Yue, Qian Feng Xia, Jiubin Pan, Shihao Sun, Zhaobo Qin, Lingyun Ye, Hailin Song

Ceramics International

DOI

2022

TiC含量对无压烧结TiC/ZrO2导电陶瓷复合材料微观结构和性能的影响

黄云涛，张进，岳新艳，张翠萍，茹红强

《机械工程材料》

2022

TiC含量对无压液相烧结SiC-TiC陶瓷复合材料结构和性能的影响

韩凌锋，赵义亮，张翠萍，岳新艳，茹红强，王伟

《机械工程材料》

2022

烧结助剂Al2O3-Y2O3添加量对无压液相烧结TiC陶瓷结构与性能的影响

赵义亮，黄楠，茹红强，张翠萍，岳新艳，刘春明，王伟

《机械工程材料》

2022

碳化硼颗粒级配对硅反应结合碳化硼复合材料结构与性能的影响

夏乾，孙是昊，赵义亮，张翠萍，茹红强，王伟，岳新艳

《无机材料学报》

2022

In-situ synthesis of high-performance Al2O3-based ceramic cores reinforced with core-shell structures

Mingda Huo, Qiaolei Li, Jiaqi Liu, Xiuyuan Zhang, Xinyan Yue, Jingjing Liang, Jinguo Li

Ceramics International

DOI

2022

Microstructure and mechanical properties of 3D-printed nano-silica reinforced alumina cores

Jiaqi Liu, Qiaolei Li, Mingda Huo, Xiuyuan Zhang, Xinyan Yue, Jingjing Liang, Jinguo Li

Ceramics International

DOI

2022

Microstructure and properties of bilayered B4C-based ceramics

Xinyan Yue, Mingda Huo, Jiaqi Liu, Jianjun Wang, Hongqiang Ru

Journal of the European Ceramic Society

DOI

2021

原位合成ZrB2对SiC-ZrB2陶瓷复合材料组织与性能的影响

黄楠，韩凌锋，张翠萍，岳新艳，茹红强，王伟

《硅酸盐学报》

DOI

2021

低压注射成型反应烧结碳化硅的制备及性能的研究

倪天原，茹红强，张翠萍，岳新艳，王伟

《陶瓷学报》

DOI

2021

凝胶注模成型制备TiB2-C复合多孔坯体的研究

刘咏阳，张翠萍，黄楠，韩凌峰，赵义亮，张进，黄云涛，茹红强，岳新艳，王伟

《陶瓷学报》

DOI

2021

Balancing flexural strength and porosity in DLP-3D printing Al2O3 cores for hollow turbine blades

Qiaolei Li, Xiaolong An, Jingjing Liang, Yongsheng Liu, Kehui Hu, Zhigang Lu, Xinyan Yue, Jinguo Li, Yizhou Zhou, Xiaofeng Sun

Journal of Material Science and Technology

DOI

2021

Effect of Boron Carbide Particle Size Distribution on the Microstructure and Properties of Reaction Bonded Boron Carbide Ceramic Composites by Silicon Infiltration

Qian Feng Xia, Shihao SUN, Yiliang Zhao, Cuiping ZHANG, Hongqiang Ru, Wei Wang, Xinyan Yue

Journal of Inorganic Materials

DOI

2021

Microstructure and mechanical properties of bilayer B4C/Si-B4C composite

Xinyan Yue, Guanghan Guo, Mingda Huo, Zhaobo Qin, Hongqiang Ru, Jianjun Wang

Materials Today Communications

DOI

2020

碳化硼基复合陶瓷制备工艺与研究进展

王继凯，茹红强，张翠萍，岳新艳

《陶瓷》

DOI

2019

Effect of Particle Size Distribution on Microstructure and Mechanical Properties of TiB2-SiC-Si Composites

Cuiping Zhang, Tian You, Ling Zhao, Qian Feng Xia, Zhaobo Qin, Yongyang Liu, Hongqiang Ru, Wei Wang, Xinyan Yue

IOP Conference Series Materials Science and Engineering

DOI

2019

WC-0.5Co-xB4C materials prepared by spark plasma sintering: Formation of WC platelet grains

Longfei Chang, Yan Li Jiang, Wei Wang, Xinyan Yue, Hongqiang Ru

International Journal of Refractory Metals and Hard Materials

DOI

2019

Ultrafine WC-0.5Co-xTaC cemented carbides prepared by spark plasma sintering

Longfei Chang, Yan Li Jiang, Wei Wang, Xinyan Yue, Hongqiang Ru

International Journal of Refractory Metals and Hard Materials

DOI

2018

原位包覆制备氮化硅复合粉体的研究

叶超超，姜岩，冯东，岳新艳，贾洪声，茅智亮，茹红强，张翠萍

《材料与冶金学报》

2018

预处理对共沉淀Si3N4-Al2O3-Y2O3复合粉体的影响

叶超超，姜岩，茹红强，岳新艳，王伟

《稀有金属材料与工程》

2018

微量Co对放电等离子烧结WC的影响

常龙飞，茹红强，张美云，岳新艳，王伟

《陶瓷学报》

2018

石墨抗氧化SiC涂层的制备与性能

姜岩，叶超超，茹红强，岳新艳，王伟

《稀有金属材料与工程》

2018

固相烧结SiC凝胶注模用水基浆料流变性能的研究

张鑫，茹红强，岳新艳，王伟

《稀有金属材料与工程》

2017

In-situ synthesis of YAG@Si3N4 powders with enhanced mechanical properties

Chaochao Ye, Xinyan Yue, Hui Zong, Guangfu Liao, Hongqiang Ru

Journal of Alloys and Compounds

DOI

2016

Gel-cast hierarchical porous B 4 C/C preform and its role in fabricating reaction bonded boron carbide composites

Yufeng Xu, Hongqiang Ru, Haibo Long, Jing Zhao, Wei Wang, Xinyan Yue

Ceramics International

DOI

2016

Coarsening of boron carbide grains during the infiltration of porous boron carbide preforms by molten silicon

Cuiping Zhang, Hongqiang Ru, Hui Zong, Weikang Sun, Jinghui Zhu, Wei Wang, Xinyan Yue

Ceramics International

DOI

2016

Effect of Ni content on microstructures and mechanical properties of hot-pressed TiC–TiB2–Ni composite

Xinyan Yue, Zhixin Cai, Xiaohui Lü, Jianjun Wang, Hongqiang Ru

Materials Science and Engineering A

DOI

2015

TiB2含量对B4C-SiC-Si-TiB2复合材料力学性能的影响

徐昱峰，茹红强，乔海波，王伟，岳新艳

《稀有金属材料与工程》

2015

利用发泡-冷冻-凝胶法制备三维互联等级大孔SiC

赵菁，茹红强，王伟，岳新艳

《稀有金属材料与工程》

2015

不同烧结温度下cBN/SiAlON陶瓷复合材料的性能研究

石晓飞，蔡志新，何超，王建军，李晓东，茹红强，岳新艳

《稀有金属材料与工程》

2015

不同烧结气氛下SiAlON/cBN陶瓷复合材料的性能研究

石晓飞，李拓文，何超，蔡志新，岳新艳，茹红强

《材料与冶金学报》

2015

Fabrication of three-dimensional interconnected hierarchically macroporous SiC by a modified freeze-gelcasting method

Jing Zhao, Hongqiang Ru, Wei Wang, Xinyan Yue, Yufeng Xu, Cuiping Zhang

Materials Letters

DOI

2015

Improvement in strength of SiC reticulated porous ceramics

Jingkun Zhao, H.Q. Ru, Yufeng Xu, L. Chang, Wantong Wang, Xinyan Yue, Chun Hao Zhang

Materials Technology

DOI

2014

β-SiAlON-cBN陶瓷复合材料的制备与性能

岳新艳，何超，石晓飞

《材料与冶金学报》

2014

碳化硼--泡沫铝双层复合材料的制备及其防弹性能

岳新艳，李振楠，郭冠宇，茹红强

《工程科学学报》

2014

The Role of Infiltration Temperature in the Reaction Bonding of Boron Carbide by Silicon Infiltration

Cuiping Zhang, Hongqiang Ru, Wei Wang, Xinyan Yue, Jing Zhao

Journal of the American Ceramic Society

DOI

2014

High temperature and water-based evaporation-induced self-assembly approach for facile and rapid synthesis of nanocrystalline mesoporous TiO 2

Wei Wang, Dongthanh Nguyen, Haibo Long, Guoqiang Liu, Song Li, Xinyan Yue, Hongqiang Ru

Journal of Materials Chemistry A

DOI

2013

Properties of B4C/Al–B4C composite with a two-layer structure

Xinyan Yue, Jianjun Wang, YangShuang Li, Hongqiang Ru

Materials Research Bulletin

DOI

2012

Microstructures and mechanical properties of a two-layer B4C/Al–B4C/TiB2 composite

Xinyan Yue, Jianjun Wang, XiuMei Li, Li You, Hongqiang Ru

Materials Science and Engineering A

DOI

2012

Microstructure and mechanical properties of a three-layer B4C/Al–B4C/TiB2–B4C composite

Xinyan Yue, Jianjun Wang, ShangYong Yu, Wei Wang, Hongqiang Ru

Materials & Design (1980-2015)

DOI

2011

热压烧结B4C陶瓷材料的组织与性能

岳新艳，陈碧霜，赵菁，王伟，茹红强

《稀有金属材料与工程》

2011

ZrB2电子结构和光学声学性质的第一性原理计算

喻亮，茹红强，岳新艳，里景阳

《东北大学学报(自然科学版)》

2011

反应烧结SiC制备SiC/B4C复合材料的研究

张翠萍，茹红强，岳新艳，王伟

《稀有金属材料与工程》

2011

原位合成TiB2颗粒增韧SiC的显微组织与断裂韧性

王伟，连景宝，岳新艳，茹红强

《东北大学学报(自然科学版)》

2010

B4C陶瓷材料的无压烧结与性能

岳新艳，应伟峰，喻亮，茹红强

《东北大学学报(自然科学版)》

2010

热压烧结ZrB/B4C陶瓷材料的组织与性能

岳新艳，陈碧霜，茹红强，喻亮

《世界科技研究与发展》

2010

溶胶-凝胶法陶瓷表面氧化锆薄膜的制备、性能及影响机制

闫海乐，茹红强，喻亮，武艳君，里景阳，魏文韬，岳新艳

《材料保护》

2010

碳热还原法CaB6粉体的制备

岳新艳，刘长江，茹红强，喻亮

《材料与冶金学报》

2010

溶胶-凝胶法在3D-SiC陶瓷表面制备纳米MgO薄膜

喻亮，马娅娜，茹红强，岳新艳

《东北大学学报(自然科学版)》

2010

包覆法制备Gp/SiC复合材料的显微结构和性能

喻亮，阚东，茹红强，岳新艳，兰勇

《材料与冶金学报》

2010

Synthesis and properties of hot pressed B4C–TiB2 ceramic composite

Xinyan Yue, Shumao Zhao, Peng Lü, Qing Hua Chang, Hongqiang Ru

Materials Science and Engineering A

DOI

2010

Effect of Alkaline Earth Oxides on Dielectric Properties of Polycrystalline BaTi 2 O 5 ), Prepared by ARC Melting

Xinyan Yue, Rong Tu, Takashi Goto, Hongqiang Ru

Ceramic transactions /Ceramic transactions

DOI

2010

Microstructure and mechanical properties of B 4 C‐TiB 2 ‐Al composites fabricated by vacuum infiltration

Peng Lü, Xinyan Yue, Hongqiang Ru, Liang Yu

Rare Metals

DOI

2009

B4C粒度配比对B4C-Al复合材料显微组织与力学性能的影响

吕鹏，茹红强，岳新艳，喻亮，孙旭东

《稀有金属材料与工程》

2009

B4C-ZrB2-Al复合材料的真空熔渗法制备与性能分析

吕鹏，岳新艳，喻亮，茹红强

《东北大学学报(自然科学版)》

2009

Mg掺杂对二钛酸钡（BaTi2O5）的介电性能的影响

岳新艳，茹红强，涂溶，后藤孝

《材料与冶金学报》

2009

Effect of CaO and ZrO2 co-substitution on dielectric properties of BaTi2O5 prepared by arc melting

Xinyan Yue, Rong Tu, Takashi Goto, Hongqiang Ru

Journal of the Ceramic Society of Japan

DOI

2009

Dielectric Properties of Ba1−xCaxTi2O5 Prepared by Arc Melting

Xinyan Yue, Rong Tu, Takashi Goto

MATERIALS TRANSACTIONS

DOI

精选作品

期刊论文

极端服役温度对增材制造氮化硅微观组织和强度的影响

网络结构WC-ZrO2陶瓷复合材料的制备、组织与性能

光固化增材制造陶瓷型芯缺陷分析及调控机制研究进展

Mechanistic study on the modulation of SiC powder morphology using NiCl2

Effect of ZrC/TiC molar ratio on the microstructure and properties of pressureless sintered B4C-(Zr,Ti)B2-graphite composites

High-strength TiB2-CoCrW cermets fabricated by mechanical alloying and low-temperature pressureless sintering

Study on coating process and properties of SiAlON/cBN composites prepared by SiO2-coated cBN particles

分散剂对光固化3D打印陶瓷浆料分散性影响的研究进展

氮化硅陶瓷在航空航天领域的研究进展及应用

SiC whisker enhanced reaction bonded boron carbide composites by silicon infiltration: The effect of SiC whisker contents

Co-enhancement of vat photopolymerized 3D printed silica-based ceramic cores by cristobalite phase transformation and in-situ ZrSiO4 formation

Modulating the morphology of β-SiC powders prepared by vacuum carbothermal reduction with ferric chloride

Cooperative control of sintering shrinkage and strength of stereolithography 3D printed silica-based ceramic cores

Controlling the cristobalite content, microstructure, and properties of vat photopolymerization 3D printed SiO2-based ceramic cores by doping Fe2O3

Effect of polysilazane on microstructure and properties of Al2O3-based ceramic core for 3D printing

Mitigating anisotropy of vat photopolymerization 3D printing Al2O3-based ceramic cores through zircon addition

Effect of metal combined with non-metallic additives on the microstructure and properties of B4C ceramics via pressureless sintering

烧结温度对无压液相烧结TiN陶瓷组织与性能的影响

Preparation and properties of YAG@TiC-ZrO2 conductive composite ceramic with a network structure

Effect of TiC addition on microstructure and properties of network structured TiC–ZrO2 composite conductive ceramics

Microstructure and properties of bilayered B4C-based composites prepared by hot-pressing

Design and formation mechanism of in-situ synthesis YAG sintered necks in stereolithography 3D printed Al2O3-based ceramic cores

Study on the microstructure and properties of TiB2-CoCrFeNiW0.2 metal ceramic composites prepared by pressureless sintering

利用SiO2合成高纯亚微米级SiC粉体的研究进展

钛酸钡——氧化锆陶瓷复合材料的组织与性能研究

TiC含量对无压烧结TiC-Al2O3导电陶瓷复合材料微观结构与性能的影响

Microstructure and properties of SrTiO3/ZrO2 ceramic composites prepared through pressureless sintering

High solid loading, low viscosity stereolithography 3D printing ceramic cores slurry

The morphology regulating effect of cobalt acetate on the vacuum carbothermal synthesis of β-SiC powder

TiC含量对无压烧结TiC/ZrO2导电陶瓷复合材料微观结构和性能的影响

TiC含量对无压液相烧结SiC-TiC陶瓷复合材料结构和性能的影响

烧结助剂Al2O3-Y2O3添加量对无压液相烧结TiC陶瓷结构与性能的影响

碳化硼颗粒级配对硅反应结合碳化硼复合材料结构与性能的影响

In-situ synthesis of high-performance Al2O3-based ceramic cores reinforced with core-shell structures

Microstructure and mechanical properties of 3D-printed nano-silica reinforced alumina cores

Microstructure and properties of bilayered B4C-based ceramics

原位合成ZrB2对SiC-ZrB2陶瓷复合材料组织与性能的影响

低压注射成型反应烧结碳化硅的制备及性能的研究

凝胶注模成型制备TiB2-C复合多孔坯体的研究

Balancing flexural strength and porosity in DLP-3D printing Al2O3 cores for hollow turbine blades

Effect of Boron Carbide Particle Size Distribution on the Microstructure and Properties of Reaction Bonded Boron Carbide Ceramic Composites by Silicon Infiltration

Microstructure and mechanical properties of bilayer B4C/Si-B4C composite

碳化硼基复合陶瓷制备工艺与研究进展

Effect of Particle Size Distribution on Microstructure and Mechanical Properties of TiB2-SiC-Si Composites

WC-0.5Co-xB4C materials prepared by spark plasma sintering: Formation of WC platelet grains

Ultrafine WC-0.5Co-xTaC cemented carbides prepared by spark plasma sintering

原位包覆制备氮化硅复合粉体的研究

预处理对共沉淀Si3N4-Al2O3-Y2O3复合粉体的影响

微量Co对放电等离子烧结WC的影响

石墨抗氧化SiC涂层的制备与性能

固相烧结SiC凝胶注模用水基浆料流变性能的研究

In-situ synthesis of YAG@Si3N4 powders with enhanced mechanical properties

Gel-cast hierarchical porous B 4 C/C preform and its role in fabricating reaction bonded boron carbide composites

Coarsening of boron carbide grains during the infiltration of porous boron carbide preforms by molten silicon

Effect of Ni content on microstructures and mechanical properties of hot-pressed TiC–TiB2–Ni composite

TiB2含量对B4C-SiC-Si-TiB2复合材料力学性能的影响

利用发泡-冷冻-凝胶法制备三维互联等级大孔SiC

不同烧结温度下cBN/SiAlON陶瓷复合材料的性能研究

不同烧结气氛下SiAlON/cBN陶瓷复合材料的性能研究

Fabrication of three-dimensional interconnected hierarchically macroporous SiC by a modified freeze-gelcasting method

Improvement in strength of SiC reticulated porous ceramics

β-SiAlON-cBN陶瓷复合材料的制备与性能

碳化硼--泡沫铝双层复合材料的制备及其防弹性能

The Role of Infiltration Temperature in the Reaction Bonding of Boron Carbide by Silicon Infiltration

High temperature and water-based evaporation-induced self-assembly approach for facile and rapid synthesis of nanocrystalline mesoporous TiO 2

Properties of B4C/Al–B4C composite with a two-layer structure

Microstructures and mechanical properties of a two-layer B4C/Al–B4C/TiB2 composite

Microstructure and mechanical properties of a three-layer B4C/Al–B4C/TiB2–B4C composite

热压烧结B4C陶瓷材料的组织与性能

ZrB2电子结构和光学声学性质的第一性原理计算

反应烧结SiC制备SiC/B4C复合材料的研究

原位合成TiB2颗粒增韧SiC的显微组织与断裂韧性

B4C陶瓷材料的无压烧结与性能

热压烧结ZrB/B4C陶瓷材料的组织与性能

溶胶-凝胶法陶瓷表面氧化锆薄膜的制备、性能及影响机制

碳热还原法CaB6粉体的制备

溶胶-凝胶法在3D-SiC陶瓷表面制备纳米MgO薄膜

包覆法制备Gp/SiC复合材料的显微结构和性能