贾和坤

2026

基于坡度修正的电驱混合动力拖拉机换挡规律研究

《中国农机化学报》

DOI

2026

Boosting methanol steam reforming performance via crystal-phase-driven strong metal-support interactions: From encapsulated Pt nanoparticles to deeply embedded PtOx-induced Pt single atoms

Journal of Energy Chemistry

2026

Switching between Formate- and CO-Mediated Reaction Pathways in Methanol Steam Reforming over Size-Dependent Pt−TiO2 Catalysts

ACS Catalysis

DOI

2026

Experimental investigation on combustion cycle-to-cycle variation characteristics in a hydrogen engine

Fuel

DOI

2026

Numerical Study on the Influence of Key Factors on the Immersion Thermal Management System of an Electric Vehicle Power Battery Pack

Journal of Energy Engineering

DOI

2026

Influence of guide vanes and nozzle channel geometry on the performance of waterjet propellers for outboard motors

Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science

DOI

2026

Multi-objective optimization of structural parameters in outboard waterjet propulsion using NSGA-II and entropy-weighted TOPSIS method

Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy

DOI

2025

Hydrogen supply pipeline leakage diffusion and safety assessment for fuel cell patrol vehicle

Clean Energy

DOI

2025

Study on the Effect of Microporous Layer Structure Parameters on the Fingering Process of Liquid Water in the Gas Diffusion Layer of PEMFC

Energy Technology

DOI

2025

Study on the atomization and mixing process of elliptical nozzle under the spatial constraint of combustion chamber

Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering

DOI

2025

Study on the pressurization liquid hydrogen supply characteristics in hydrogen fuel cell vehicles

Energy

DOI

2025

Numerical Study on the Influence of Elliptical Ribs on the Cold‐Plate Performance of Electric Vehicle Power Batteries

Energy Technology

DOI

2025

Study of Liquid Water Breakthrough Process in the Gas Diffusion Layer of Proton Exchange Membrane Fuel Cells

NANO

DOI

2025

Influence of flexible arch structure on radial dynamic pressure gas foil bearing under variable working conditions

Industrial Lubrication and Tribology

DOI

2025

Heat transfer performance and bubble-particle interaction dynamics in particle-laden pool boiling

International Communications in Heat and Mass Transfer

DOI

2025

Regulating Heteroatom Doping-Induced Embedded Pt-M Bimetallic Sites Coupled with Ce 3+ -OVs for Efficient Low-Temperature Methanol Steam Reforming

ACS Catalysis

DOI

2025

Study of water phase transition process in cathode flow channel of proton exchange membrane fuel cell under low temperature condition

International Communications in Heat and Mass Transfer

DOI

2024

Study of the Influence of DPF Regeneration Conditions on the Oxidation Characteristics of Particulate Matter in Biodiesel Combustion

Journal of Energy Engineering

DOI

2024

Hydrogen Production Performance of a Self-Heating Methanol Steam Reforming Microreactor

Journal of Energy Engineering

DOI

2024

Study of the effect of pore properties of microporous layer on water transport process in proton exchange membrane fuel cell

International Communications in Heat and Mass Transfer

DOI

2024

Study on hydrogen diffusion and combustion characteristics of hydrogen fuel cell sightseeing vehicles in open space

International Journal of Hydrogen Energy

DOI

2024

Study on the spray characteristics of transverse jets with elliptical nozzles in supersonic crossflows using the volume of fluid–discrete phase model

Physics of Fluids

DOI

2024

Spray characteristics of elliptical orifice spray in diesel engine under air movement conditions

International Journal of Engine Research

DOI

2024

Study on the impact of methanol steam reforming reactor channel structure on hydrogen production performance

Renewable Energy

DOI

2024

Design and performance optimization of diesel engine waste heat recovery methanol reforming hydrogen generation system

International Journal of Chemical Reactor Engineering

DOI

2024

Study on energy management strategy of fuel cell patrol vehicle hybrid power system

Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering

DOI

2024

Influence of concave-convex composite texture on the tribology and transmission performance of wet clutch couples

Tribology International

DOI

2024

Studies on heat transfer performance of miniature cross-flow heat exchangers with perforated fins for direct methanol fuel cells

Applied Thermal Engineering

DOI

2024

Research on ice droplet thermal purge melting process in the flow channel of proton exchange membrane fuel cell

International Journal of Hydrogen Energy

DOI

2024

Pilot injection impact on diesel PCCI combustion: an endoscopic study with a turbocharged engine

Journal of the Brazilian Society of Mechanical Sciences and Engineering

DOI

2024

A comprehensive investigation on the internal flow and outflow characteristics of GDI elliptical divergent nozzles

International Journal of Engine Research

DOI

2024

Numerical Study of Internal Two-Phase Flow Characteristics of an Outside-In-Liquid Atomizer

Arabian Journal for Science and Engineering

DOI

2024

Effect of variable parameters on delayed droplet icing process in proton exchange membrane fuel cell flow channel

Ionics (Kiel)

DOI

2023

高平原一体1.0kW便携式柴油发电机组设计开发

《移动电源与车辆》

2023

高平原一体1.0k W携行柴油发电机组可靠性设计

《移动电源与车辆》

2023

GDI椭圆喷孔的喷雾撞壁特性

《江苏大学学报(自然科学版)》

2023

Analysis of inner flow and outflow characteristics of different scramjet elliptical holes

Energy Sources Part A Recovery Utilization and Environmental Effects

DOI

2023

A comparative analysis of internal flow and spray characteristics in triangular orifices with diesel and biodiesel

Energy

DOI

2023

Numerical investigation on spray and flow field characteristics of elliptical nozzle in supersonic crossflow

Energy Sources Part A Recovery Utilization and Environmental Effects

DOI

2023

Research on foil thermal features of hydrodynamic air foil bearing with the Three-dimensional heat transfer model

Thermal Science and Engineering Progress

DOI

2022

柴油机进气掺混甲醇重整气燃烧过程及排放特性

《农业装备与车辆工程》

2022

Experimental investigation on the structure characteristics of methanol/biodiesel particulate matter

Fuel

DOI

2022

Experimental study on the combustion, emissions and fuel consumption of elliptical nozzle diesel engine

Energy

DOI

2022

Influence of laser‐perforated gas diffusion layer on mass transfer and performance of proton exchange membrane fuel cell

International Journal of Energy Research

DOI

2022

Dispersion stability and wear properties of nano-CeO 2 as lubricating oil additives for engines

Industrial Lubrication and Tribology

DOI

2022

Effect of shape parameters on the enhancement of ice-melting performance in a novel perforated gas diffusion layer of proton exchange membrane fuel cell

International Communications in Heat and Mass Transfer

DOI

2022

A fully coupled 3D elastohydrodynamic model built with MITC element for static performance analysis of gas foil bearings

Industrial Lubrication and Tribology

DOI

2022

A novel dynamic contact angle model of lattice Boltzmann method for water droplet impact on proton exchange membrane fuel cell channel surface

International Journal of Energy Research

DOI

2022

Investigation of inner flow and near-field spray patterns of the non-circular diesel injector

Sadhana

DOI

2022

Study of dispersion stability and wear property of lubricating oil blends added with nanographene for a diesel engine

Lubrication Science

DOI

2022

Effects of liner surface textures on the tribological performance of different production piston rings

Lubrication Science

DOI

2022

Experimental Study on the Penetration of Diesel and Biodiesel Spray Liquid Emerging from an Equilateral Triangular Orifice under Evaporative Conditions

Journal of Thermal Science

DOI

2021

模糊逻辑的增程式燃料电池SUV能量管理策略研究

《重庆理工大学学报(自然科学)》

2021

高压条件下椭圆孔喷雾破碎雾化分析

《江苏大学学报(自然科学版)》

2021

Analysis of elliptical diesel nozzle spray dynamics using a one-way coupled spray model

International Journal of Engine Research

DOI

2021

Study of the tribological properties of nano lubricating oil blends for diesel engines

Nano Futures

DOI

2021

Effects of SCR injection system parameters on UWS atomization and mixing characteristics at low exhaust temperature

Sadhana

DOI

2021

Investigation of inner cavitation and nozzle exit flow patterns for elliptical orifice GDI injectors with various aspect ratios

International Communications in Heat and Mass Transfer

DOI

2021

EXPERIMENTAL STUDY ON THE NON-CIRCULAR ORIFICE EFFECT ON SPRAY AND MIXING CHARACTERISTICS OF GDI INJECTORS

Atomization and Sprays

DOI

2021

Experimental research on the wall-wetting effects on the frictional property of the cylinder liner–piston ring pair

Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology

DOI

2021

The effect of the divergent-convergent GDI injector on inner flow and spray characteristics at high injection pressure

Energy Sources Part A Recovery Utilization and Environmental Effects

DOI

2021

Tribological performance of self‐lubricating polyurethane elastomer compounding with the modified ultra‐high molecular weight polyethylene

Polymer Engineering and Science

DOI

2021

The influence of elliptical and circular orifices on the transverse jet characteristics at supersonic crossflow

Acta Astronautica

DOI

2021

Influence of perforated gas diffusion layer micropore shape parameters on water removal in a proton exchange membrane fuel cell flow channel

International Journal of Energy Research

DOI

2021

Influence of microdimple on lubrication performance of textured plunger pump

Industrial Lubrication and Tribology

DOI

2021

Effects of gasoline and ethanol on inner flows and swallowtail-like spray behaviors of elliptical GDI injector

Fuel

DOI

2021

Experimental research on the frictional performance of real laser-textured cylinder liner under different lubrication conditions

International Journal of Engine Research

DOI

2021

Experimental and numerical investigation on inner flow and spray characteristics of elliptical GDI injectors with large aspect ratio

Energy

DOI

2021

Effect of pillared surfaces with different shape parameters on droplet wettability via Lattice Boltzmann method

Colloids and Surfaces A Physicochemical and Engineering Aspects

DOI

2020

Effects of microstructure shape parameters on water removal in a PEMFC lotus-like flow channel

International Journal of Hydrogen Energy

DOI

2020

Effect of compound texture on lubrication and sealing performance of plunger pump

Lubrication Science

DOI

2020

Effects of Diesel Fuel Nano-Additives on Friction and Wear Properties of Precision Coupled Parts of a Diesel Engine Fuel Injection System

Tribology Transactions

DOI

2020

The Effect of Elliptical Diesel Nozzles on Spray Liquid-Phase Penetration under Evaporative Conditions

Energies

DOI

2020

Experimental study on the tribological behaviour of CeO2‐diesel blends on the injector body

Lubrication Science

DOI

2019

增压柴油机活塞结构参数优化

《南通职业大学学报》

2019

两气门柴油机缸盖火力面热边界条件的确定方法

《机械设计与制造》

DOI

2019

高压喷射GDI喷孔几何结构对喷孔内流及喷雾特性的影响

《车用发动机》

2019

喷油参数对发动机怠速工况噪声与声品质的影响

《机械设计与制造》

DOI

2019

Controlling Emissions and Correcting Power of Nonroad Naturally Aspirated Diesel Engine Operating at High Altitude

Journal of Energy Engineering

DOI

2019

Effect of injection strategy and load on the performance of a common-rail diesel engine fueled with Jatropha curcas biodiesel–diesel blend

Journal of the Brazilian Society of Mechanical Sciences and Engineering

DOI

2018

小型非道路柴油机内部废气再循环排放性能研究

《机械设计与制造》

2018

活塞结构参数对敲击能量影响的计算研究

《现代车用动力》

2018

低温条件Urea-SCR喷射系统结构对雾化混合特性的影响研究

《机械设计与制造》

2018

The influence of roughness distribution characteristic on the lubrication performance of textured cylinder liners

Industrial Lubrication and Tribology

DOI

2018

Experimental study on the spray and mixing characteristics for equilateral triangular and circular nozzles with diesel and biodiesel under high injection pressures

Fuel

DOI

2018

An experimental comparison of the elliptical and circular nozzles spray and mixing characteristics under different injection pressures

Fuel

DOI

2018

Visualization of combustion performance and emission characteristics of a four-cylinder diesel engine at various inlet oxygen concentrations at part loads

Journal of Mechanical Science and Technology

DOI

2018

Internal flow and spray characteristics for elliptical orifice with large aspect ratio under typical diesel engine operation conditions

Fuel

DOI

2018

Experimental study on the diesel and biodiesel spray characteristics emerging from equilateral triangular orifice under real diesel engine operation conditions

Fuel

DOI

2018

Experimental study on the spray characteristics discharging from elliptical diesel nozzle at typical diesel engine conditions

Fuel

DOI

2018

NUMERICAL INVESTIGATION ON EFFECTS OF ELLIPTICAL DIESEL NOZZLE ON PRIMARY SPRAY CHARACTERISTICS BY LARGE EDDY SIMULATION (LES)

Atomization and Sprays

DOI

2018

COMPUTATIONAL ANALYSIS OF FLOW PATTERNS IN ELLIPTICAL DIESEL NOZZLES AT HIGH INJECTION PRESSURES

Atomization and Sprays

DOI

2018

EXPERIMENTAL AND NUMERICAL STUDY OF INTERNAL FLOW AND SPRAY CHARACTERISTICS FOR ELLIPTICAL ORIFICE UNDER TYPICAL DIESEL ENGINE OPERATION CONDITIONS

Atomization and Sprays

DOI

2017

缸套表面环槽织构润滑性能数值分析

《机械设计与制造》

2017

柴油机喷油嘴内壁面粗糙度对空化效应的影响

《机械设计与制造》

2017

喷雾锥角及燃烧室对柴油机预混合低温燃烧的影响

《广西大学学报(自然科学版)》

2017

基于实际驾驶工况的DPF颗粒模型的建立及试验

《兰州理工大学学报》

2017

Effects of the array modes of laser-textured micro-dimples on the tribological performance of cylinder liner–piston ring

Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology

DOI

2017

Experimental Investigation on the Early Stage Spray Characteristics with Biodiesel and Diesel

DOI

2017

Visualization of combustion performance and emission characteristics of a four-cylinder diesel engine at various injection timings and engine loads

Journal of the Brazilian Society of Mechanical Sciences and Engineering

DOI

2017

Performance optimization of diesel engine fueled with diesel–jatropha curcas biodiesel blend using response surface methodology

Journal of Mechanical Science and Technology

DOI

2017

Theoretical and experimental comparison of internal flow and spray characteristics between diesel and biodiesel

Fuel

DOI

2017

Numerical research on micro diesel spray characteristics under ultra-high injection pressure by Large Eddy Simulation (LES)

International Journal of Heat and Fluid Flow

DOI

2016

预喷射对轻型柴油机燃烧与排放性能影响的可视化研究

《小型内燃机与车辆技术》

2016

基于有限元法的陶瓷热障涂层活塞热性能研究

《中国农机化学报》

2016

Numerical research of diesel spray and atomization coupled cavitation by Large Eddy Simulation (LES) under high injection pressure

International Journal of Heat and Fluid Flow

DOI

2015

内部废气再循环柴油机燃烧过程分析及排放性能试验

《农业工程学报》

2015

轻型柴油机预混合低温燃烧和排放性能的试验研究

《汽车工程》

2015

预混合低温燃烧柴油机燃油喷射参数与燃烧室的空间匹配研究

《机械设计与制造》

2015

Visualizations of combustion and emissions characteristics in a light-duty diesel engine with achieved premixed low temperature combustion

International Journal of Automotive Technology

DOI

2014

IEGR对小型非道路柴油机性能影响的可视化研究

《小型内燃机与车辆技术》

2014

Optimization of EGR and split injection strategy for light vehicle diesel low temperature combustion

International Journal of Automotive Technology

DOI

2013

低排放轻型车用柴油机结构及燃烧系统的优化

《农业工程学报》

2013

轻型车用柴油机预混合低温燃烧机理及排放控制研究

《江苏大学》

2013

Optimization of structure and combustion system for a low-emission light-duty diesel engine

Nongye gongcheng xuebao

DOI

2012

EGR对高压共轨柴油机燃烧过程影响的可视化研究

《工程热物理学报》

2012

EGR对轻型柴油机缸内燃烧及排放性能影响的可视化

《农业工程学报》

2012

Visualization of influence of ERG on combustion process and emission performance for light-duty diesel engine

Nongye gongcheng xuebao

DOI

2011

预喷射对轻型车用柴油机排放性能的影响

《车用发动机》

2011

后喷对轻型柴油机燃烧过程及排放性能的影响

《江苏大学学报(自然科学版)》

2011

通用小型汽油机进排气系统试验台设计与应用

《机械设计》

2011

Design and application of test rig for the intake and exhaust system of general small gasoline engine

Journal of Machine Design

2010

Numerical Simulation on the Effect of Pilot Injection on Combustion and NOx Emission Characteristics of Light-Vehicle Diesel Engine

International Conference on Digital Manufacturing & Automation

DOI

2009

通用小型汽油机进气道CFD模拟计算与分析

《小型内燃机与车辆技术》

2009

运行参数对小型通用汽油机排放的影响

《小型内燃机与车辆技术》