石红雁｜深圳大学｜学者主页

2026

Challenges and optimization progress in high aspect ratio micro-hole formation for high-frequency and high-speed PCBs:A review

Jianyi Huang, Xian-Wen Liu, Hong-Wei Zhang, Tao Zhu, Hongyan Shi

Precision engineering

DOI

2025

Green dynamic scheduling optimization and visual monitoring system for micro-hole drilling production line based on digital twin

Chuntao Wu, Jiahong Cai, Xianwen Liu, Hongyan Shi, Junting Fu

International Journal Of Computer Integrated Manufacturing

DOI

2025

Improved dual-population genetic algorithm to solve human-robot collaborative assembly line balancing problem

Jiahong Cai, Haoyun Xue, Chengye Zheng, Hongyan Shi

International Journal Of Production Research，Vol. 630, No. 17

DOI

2025

Materials removal processes and chip evacuation in high-frequency and high-speed PCBs micro-hole drilling with large aspect ratio: a review

Hongwei Zhang, Xianwen Liu, Jianyi Huang, Guilin Lin, Junliang Zhang, Hongyan Shi

The International Journal of Advanced Manufacturing Technology

DOI

2025

Mechanical model of ultrasonic-assisted micro-hole drilling for high-speed printed circuit boards

Zhaoguo Wang, Hongyan Shi, Qian Zhou, Tao Zhu, Xianwen Liu

The International Journal of Advanced Manufacturing Technology

DOI

2025

Chip removal mechanism and hole plugging in backdrilling of high-speed printed circuit board

Zhuangpei Chen, Hongyan Shi, Tao Zhu, Xianwen Liu, Zhaoguo Wang, Qian Zhou

The International Journal of Advanced Manufacturing Technology

DOI

2025

Laser Stripe Extraction for 3D Reconstruction of Complex Internal Surfaces

Xiaowei Zhao, Da-Guo Yu, Hongyan Shi

IEEE Access

DOI

2024

Tool wear on machining of difficult-to-machine materials: a review

Guilin Lin, Hongyan Shi, Xianwen Liu, Zhaoguo Wang, Hao Zhang, Junliang Zhang

The International Journal of Advanced Manufacturing Technology

DOI

2024

A review of multi-axis additive manufacturing: Potential, opportunity and challenge

Pengfei Tang, Xian-Feng Zhao, Hongyan Shi, Bo Hu, Jinghu Ding, Buquan Yang, Wei Xu

Additive Manufacturing

DOI

2024

Corrigendum to “A review of multi-axis additive manufacturing: Potential, opportunity and challenge” [Addit. Manuf. 83 (2024) 104075]

Pengfei Tang, Xian-Feng Zhao, Hongyan Shi, Bo Hu, Jinghu Ding, Buquan Yang, Wei Xu

Additive Manufacturing

DOI

2024

Research on Point Cloud Acquisition and Calibration of Deep Hole Inner Surfaces Based on Collimated Ring Laser Beams

Huifu Du, Xiaowei Zhao, Da-Guo Yu, Hongyan Shi, Ziyang Zhou

Italian National Conference on Sensors

DOI

2023

Scheduling Optimization of Printed Circuit Board Micro-Hole Drilling Production Line Based on Complex Events

Qian Zhou, Xupeng Hu, Siyuan Peng, Yonghui Li, Tao Zhu, Hongyan Shi

Processes

DOI

2023

Prediction Model of the Remaining Useful Life of the Drill Bit during Micro-Drilling of the Packaging Substrate

Xianwen Liu, Sha Tao, Tao Zhu, Zhaoguo Wang, Hongyan Shi

Processes

DOI

2023

Mechanical model of back-drilling high-speed printed circuit boards with eccentricity effects

Tao Zhu, Hongyan Shi, Zhuangpei Chen, Xianwen Liu, Zhaoguo Wang, Qian Zhou

International Journal of Mechanical Sciences

DOI

2023

Simulation Research on Variable Parameter Drilling of Glass Fiber Reinforced Composite / Copper Foil Laminates

Hongyan Shi, Qian Zhou, Zhaoguo Wang, Zhuangpei Chen, Tao Zhu

Journal of Physics Conference Series

DOI

2022

Study on the mechanism affecting the quality of micro-hole in ultrasonic-assisted drilling of high-speed circuit boards

Zhisen Gao, Hongyan Shi, Sha Tao, Xianwen Liu, Tao Zhu, Zhuangpei Chen

The International Journal of Advanced Manufacturing Technology

DOI

2022

Back-drilling of high-speed printed circuit boards: a review

Hongyan Shi, Tao Zhu, Zhuangpei Chen

The International Journal of Advanced Manufacturing Technology

DOI

2022

Accurate temperature characterization and experimental verification in the PCB drilling process

Hongyan Shi, Zhuangpei Chen, Xiaoke Lin, Tao Zhu

The International Journal of Advanced Manufacturing Technology

DOI

2022

Research on detection of different metallographic structures of high speed wheel steel based on laser-induced breakdown spectroscopy.

Jun Hu, Liang Yang, Tongzheng Lin, Hongyan Shi, Peng Qiao, Yong He, Yan-De Liu

Optics Express

DOI

2021

Characterization of Printed Circuit Board Micro-Holes Drilling Process by Accurate Analysis of Drilling Force Signal

Sha Tao, Zhisen Gao, Hongyan Shi

International Journal of Precision Engineering and Manufacturing

DOI

2021

Micro hole drilling of high frequency printed circuit board containing hard fillers

Hongyan Shi, Xianwen Liu, Zhisen Gao, Guang Huang, Sha Tao, Lianyu Fu, Xiong Liang

Journal of Micromechanics and Microengineering

DOI

2020

Recast layer removal of 304 stainless steel by combining micro-EDM with negative polarity micro-EDM

Bin Xu, Sheng-gui Chen, Xiong Liang, Jianguo Lei, Hongyan Shi, Lianyu Fu, Jun Yang, Taijiang Peng, Hang Zhao, Likuan Zhu

The International Journal of Advanced Manufacturing Technology

DOI

2020

Investigation on Drill Wear and Micro Hole Quality in High Speed Drilling of High Frequency Printed Circuit Board

Xianwen Liu, Hongyan Shi, Guang Huang, Sha Tao, Zhisen Gao

IOP Conference Series Materials Science and Engineering

DOI

2020

The wear of 3D microelectrode in micro electrical discharge machining

Bin Xu, Sheng-gui Chen, Jianguo Lei, Hang Zhao, Xiaoyu Wu, Xiong Liang, Hongyan Shi, Lianyu Fu, Likuan Zhu

The International Journal of Advanced Manufacturing Technology

DOI

2020

Research on the quality of high frequency communication printed circuit board micro-holes based on printed circuit board microsections method

Sha Tao, Zhisen Gao, Shi Hongyan

International Forum on Electrical Engineering and Automation (IFEEA)

DOI

2018

Materials and micro drilling of high frequency and high speed printed circuit board: a review

Hongyan Shi, Xianwen Liu, Yan Yan Lou

The International Journal of Advanced Manufacturing Technology

DOI

2018

The influence of properties of printed circuit board resin and filler on drilling force

Hongyan Shi, Xiaoke Lin, Qiuxin Yan, JiaNan Zhang

Circuit World

DOI

2018

Influential mechanism of printed circuit board properties on micro hole drilling temperature

Hongyan Shi, Xiaoke Lin, Qiuxin Yan, Xiong Liang

Circuit World

DOI

2017

Characterization of drill bit breakage in PCB drilling process based on high-speed video analysis

Hongyan Shi, Xiaoke Lin, Yun Wang

Circuit World

DOI

2016

Movement characteristics of micro drill bit during entry period in PCB high speed drilling

Hongyan Shi, Qiuxin Yan, Shengzhi Chen

Circuit World

DOI

2016

The influencing mechanism of drilling parameters on micro drilling temperature on the basis of calibration of surface emissivity of micro drill bit

Hongyan Shi, Jiali Ning, Qiuxin Yan

Circuit World

DOI

2015

Mechanical drilling of PCB micro hole and its application in micro ultrasonic powder molding

Xiong Liang, Bing Li, Lianyu Fu, Xiaoyu Wu, Hongyan Shi, Taijiang Peng, Bin Xu

Circuit World

DOI

2015

Performance analysis of micro drill bit with asymmetric helix groove

Hongyan Shi, Jiali Ning, Hui Li

Circuit World

DOI

2015

Temperature simulation and its application in on-line temperature measurement of a micro drill bit

Hongyan Shi, Hui Li, Shengzhi Chen

Circuit World

DOI

2013

Challenges and developments of micro drill bit for printed circuit board: a review

Hongyan Shi, Hui Li

Circuit World

DOI

2011

Experimental study on drilling force in printed circuit board micro drilling process

Hongyan Shi, Song Fumin, Lianyu Fu

Circuit World

DOI

2010

PCB微钻的三维精确建模

陈汉泉，石红雁

《工具技术》

精选作品

期刊论文

Challenges and optimization progress in high aspect ratio micro-hole formation for high-frequency and high-speed PCBs:A review

Green dynamic scheduling optimization and visual monitoring system for micro-hole drilling production line based on digital twin

Improved dual-population genetic algorithm to solve human-robot collaborative assembly line balancing problem

Materials removal processes and chip evacuation in high-frequency and high-speed PCBs micro-hole drilling with large aspect ratio: a review

Mechanical model of ultrasonic-assisted micro-hole drilling for high-speed printed circuit boards

Chip removal mechanism and hole plugging in backdrilling of high-speed printed circuit board

Laser Stripe Extraction for 3D Reconstruction of Complex Internal Surfaces

Tool wear on machining of difficult-to-machine materials: a review

A review of multi-axis additive manufacturing: Potential, opportunity and challenge

Corrigendum to “A review of multi-axis additive manufacturing: Potential, opportunity and challenge” [Addit. Manuf. 83 (2024) 104075]

Research on Point Cloud Acquisition and Calibration of Deep Hole Inner Surfaces Based on Collimated Ring Laser Beams

Scheduling Optimization of Printed Circuit Board Micro-Hole Drilling Production Line Based on Complex Events

Prediction Model of the Remaining Useful Life of the Drill Bit during Micro-Drilling of the Packaging Substrate

Mechanical model of back-drilling high-speed printed circuit boards with eccentricity effects

Simulation Research on Variable Parameter Drilling of Glass Fiber Reinforced Composite / Copper Foil Laminates

Study on the mechanism affecting the quality of micro-hole in ultrasonic-assisted drilling of high-speed circuit boards

Back-drilling of high-speed printed circuit boards: a review

Accurate temperature characterization and experimental verification in the PCB drilling process

Research on detection of different metallographic structures of high speed wheel steel based on laser-induced breakdown spectroscopy.

Characterization of Printed Circuit Board Micro-Holes Drilling Process by Accurate Analysis of Drilling Force Signal

Micro hole drilling of high frequency printed circuit board containing hard fillers

Recast layer removal of 304 stainless steel by combining micro-EDM with negative polarity micro-EDM

Investigation on Drill Wear and Micro Hole Quality in High Speed Drilling of High Frequency Printed Circuit Board

The wear of 3D microelectrode in micro electrical discharge machining

Research on the quality of high frequency communication printed circuit board micro-holes based on printed circuit board microsections method

Materials and micro drilling of high frequency and high speed printed circuit board: a review

The influence of properties of printed circuit board resin and filler on drilling force

Influential mechanism of printed circuit board properties on micro hole drilling temperature

Characterization of drill bit breakage in PCB drilling process based on high-speed video analysis

Movement characteristics of micro drill bit during entry period in PCB high speed drilling

The influencing mechanism of drilling parameters on micro drilling temperature on the basis of calibration of surface emissivity of micro drill bit

Mechanical drilling of PCB micro hole and its application in micro ultrasonic powder molding

Performance analysis of micro drill bit with asymmetric helix groove

Temperature simulation and its application in on-line temperature measurement of a micro drill bit

Challenges and developments of micro drill bit for printed circuit board: a review

Experimental study on drilling force in printed circuit board micro drilling process

PCB微钻的三维精确建模

会议论文

Line-Structured Laser Scanning Measurement System for BGA Lead Coplanarity

研究方向