赵凌燕｜西安科技大学｜学者主页

2026

Phase-Field Investigation of Dual-Crack Propagation Paths in Dissimilar Metal Welded Joints

Lingyan Zhao, Yapeng Li, Zheng Wang, Bin Yang, L Xiong

Nuclear Science and Engineering

DOI

2026

Thread tooth modifications for optimizing load distribution in the inverted planetary roller screw mechanism

Xinyu Lv, Yan-Qiang Sun, Guiping Xie, Huiming Cheng, Rui-Jie Gu, Lingyan Zhao

Journal of the Brazilian Society of Mechanical Sciences and Engineering

DOI

2025

Crack-Tip Constraint Analysis of the Dissimilar Metal-Welded Joint and Constraint Match with Test Specimens

Lingyan Zhao, Bin Yang, Yuchun Sun

Nuclear Science and Engineering

DOI

2024

Prediction of Crack Propagation Directions in Dissimilar Metal‐Welded Joints Using Phase‐Field Models and Discussion of Its Mechanisms

Lingyan Zhao, Bin Yang, Zheng Wang

Science and Technology of Nuclear Installations

DOI

2024

The influences of Ag nanoparticles on voids growth and solderability about Sn3.0Ag0.5Cu/Cu solder joint

Lingyan Zhao, Hai-Long Bai, Xin Gu, Huaxin Liang, Hongwei Yang, Ji-Kang Yan

Materials Research Express

DOI

2024

Ni and Sb improve the microstructure, mechanical properties, and solder joint reliability of Sn-3.0Ag-0.5Cu alloy

Biao Wang, Ji-Kang Yan, Jiang-Shan Liu, Jian-Hua Zhao, Lingyan Zhao

Vacuum

DOI

2024

Improvement of heat aging resistance and tensile strength of SAC305/Cu solder joints by multi-element microalloying

Ji-Kang Yan, Biao Wang, Jian-Hua Zhao, Lingyan Zhao, Runjie Guo, Jianhua Sheng

Intermetallics (Barking)

DOI

2024

Effect of Ag Doping on Mechanical Properties of Cu6Sn5 Intermetallic Compounds

Biao Wang, Jun-Li Lu, Lingyan Zhao, Junjie Liao, Ji-Kang Yan

Metals

DOI

2023

Analysis of Crack Propagation Behaviors in RPV Dissimilar Metal Welded Joints Affected by Residual Stress

Lingyan Zhao, Yuchun Sun, Zheren Shi, Bin Yang

Materials

DOI

2022

裂纹长度对焊接接头裂纹扩展驱动力的影响

石哲任，赵凌燕，王正，杨永杰

《舰船科学技术》

2022

An Investigation of a New Parameter Based on the Plastic Strain Gradient to Characterize Composite Constraint around the Crack Front at a Low Temperature

Lingyan Zhao, Zheren Shi, Zheng Wang, Fuqiang Yang

Materials

DOI

2022

Modeling the Hydrogen Redistribution at the Grain Boundary of Misoriented Bicrystals in Austenite Stainless Steel

Fuqiang Yang, Tao Yan, Wenjuan Zhang, Haibing Zhang, Lingyan Zhao

Materials

DOI

2020

残余应力与外加载荷共同作用对裂尖前端应力场的影响

贾文娜，赵凌燕

《热加工工艺》

DOI

2020

Influence of Ag content on the formation and growth of intermetallic compounds in Sn–Ag–Cu solder

Hai-Long Bai, Zan Long, Jun-Yu Chen, Xing Gu, Jing-Mei Lv, Lingyan Zhao, Dong-Dong Chen, Ji-Kang Yan

Journal of materials science. Materials in electronics

DOI

2019

残余应力对焊接接头裂尖蠕变性能的影响

汪卫兵，朱茂进，李凯，李小超，赵凌燕

《热加工工艺》

DOI

2019

随机因素对镍基合金应力腐蚀裂尖力学特性的影响（英文）

赵宽，薛河，赵凌燕，杨富强

《稀有金属材料与工程》

2019

一次超载对裂纹前端残余应力重新分布的影响分析

赵凌燕，贾文娜，崔英浩，杨富强

《热加工工艺》

DOI

2019

Probability prediction of crack growth rate of environmentally assisted cracks of nickel-based alloys based on Latin hypercube sampling

Kuan Zhao, He Xue, Fuqiang Yang, Lingyan Zhao

International Journal of Pressure Vessels and Piping

DOI

2019

Research on the Micro-Mechanical State at Tip of Environmentally Assisted Cracking Based on Latin Hypercube Sampling Method

Kuan Zhao, He Xue, Lingyan Zhao

Key engineering materials

DOI

2019

Effects of Crystal Orientation and Grain Boundary Inclination on Stress Distribution in Bicrystal Interface of Austenite Stainless Steel 316L

Fuqiang Yang, He Xue, Lingyan Zhao, Xiurong Fang, Haibing Zhang

Advances in Materials Science and Engineering

DOI

2019

Effects of Welded Mechanical Heterogeneity on Interface Crack Propagation in Dissimilar Weld Joints

Fuqiang Yang, He Xue, Lingyan Zhao, Xiurong Fang

Advances in Materials Science and Engineering

DOI

2018

几何拘束对镍基合金裂纹扩展速率影响的有限元分析

赵凌燕，崔英浩，唐伟

《腐蚀与防护》

2018

划痕诱发的镍基合金应力腐蚀裂尖扩展驱动力分析（英文）

赵凌燕，崔英浩，杨富强，薛河

《稀有金属材料与工程》

2018

考虑参数随机性的应力腐蚀裂尖力学特性分析

赵宽，薛河，赵凌燕，崔英浩

《热加工工艺》

2018

压水堆一回路环境中304不锈钢的蠕变特性分析

薛河，崔英浩，赵凌燕，唐伟，倪陈强

《西安科技大学学报》

2018

Three-Dimensional Analysis of the Effect of Out-Of-Plane Constraint on the Local Plastic Strain around Crack Front

Lingyan Zhao, Yinghao Cui, Fuqiang Yang

IOP Conference Series Materials Science and Engineering

DOI

2018

Effects of Grain Orientation on Stress State near Grain Boundary of Austenitic Stainless Steel Bicrystals

Fuqiang Yang, He Xue, Lingyan Zhao, Xiurong Fang

Advances in Materials Science and Engineering

DOI

2017

膜致应力对应力腐蚀裂尖力学特性的影响（英文）

杨宏亮，薛河，杨富强，赵凌燕

《稀有金属材料与工程》

2017

蠕变性能失配对应力腐蚀裂尖力学场的影响

崔英浩，薛河，赵凌燕，陈政，高富国

《热加工工艺》

2016

氧化膜形状对镍基合金应力腐蚀裂尖应力应变的影响

杨宏亮，薛河，赵凌燕，郭瑞

《热加工工艺》

2016

高温水环境中镍基合金力学性能对裂尖力学化学效应的影响（英文）

杨富强，薛河，赵凌燕，方秀荣

《稀有金属材料与工程》

2016

应力强度因子对镍基合金应力腐蚀开裂裂尖力学特性的影响

李永强，赵凌燕

《腐蚀与防护》

2015

Effects of creep on mechanical fields nearby crack tip in weld joints

Fuqiang Yang, He Xue, Lingyan Zhao, Wei Feng Tang

Materials Research Innovations

DOI

2014

应力强度因子对高温水环境中镍基合金裂尖电化学腐蚀电位的影响（英文）

杨富强，薛河，赵凌燕，方秀荣

《稀有金属材料与工程》

2014

核电焊接接头裂尖力学特征及环境致裂裂纹扩展速率研究

赵凌燕

《西安科技大学》

2014

A quantitative prediction model of SCC rate for nuclear structure materials in high temperature water based on crack tip creep strain rate

Fuqiang Yang, He Xue, Lingyan Zhao, Xiurong Fang

Nuclear Engineering and Design

DOI

2014

Effects of Stress Intensity Factor on Electrochemical Corrosion Potential at Crack Tip of Nickel-Based Alloys in High Temperature Water Environments

Fuqiang Yang, He Xue, Lingyan Zhao, Xiurong Fang

《稀有金属材料与工程》

DOI

2014

Numerical investigation on stress corrosion cracking behavior of dissimilar weld joints in pressurized water reactor plants

Lingyan Zhao, He Xue, Fuqiang Yang, Yaohong Suo

Frattura ed Integrità Strutturale

DOI

2013

焊接接头力学性能不均匀性对管道裂纹断裂参量的影响分析

龚晓燕，焦康，赵凌燕，薛河

《西安科技大学学报》

2013

Analysis on Mechanical Parameters at SCC Tip in Fusion Boundary Region of Dissimilar Weld Joint

Lingyan Zhao, He Xue, Fuqiang Yang, Yuan Kui Gui

Applied Mechanics and Materials

DOI

2013

Calculations and Modeling of Material Constants in Hyperbolic-Sine Creep Model for 316 Stainless Steels

Fuqiang Yang, He Xue, Lingyan Zhao, Jin Tian

Applied Mechanics and Materials

DOI

2013

Effect of Strength Matching of Welded Joint on Stress Corrosion Cracking in Nuclear Power Structures

He Xue, Zhen Wen Wang, Lingyan Zhao, Min Qiao, Wei Bing Wang

Applied Mechanics and Materials

DOI

2013

Stress Corrosion Cracking Behavior of an Alloy 182-A533B Weld Joint with Continuous Material Properties

Lingyan Zhao, He Xue, Kang Jiao, Wei Feng Tang

Advanced materials research

DOI

2011

镍基合金应力腐蚀裂尖氧化膜力学特性分析

薛河，薛晓峰，唐伟，赵凌燕，龚晓燕

《稀有金属材料与工程》

2011

Effect of Welded Mechanical Heterogeneity on Local Stress and Strain Ahead of Growing Crack Tips in the Piping Welds

Lingyan Zhao, He Xue, Wei Feng Tang, Xiurong Fang

DOI

2011

Effect of Mechanical Parameter Selection in Quantitative Estimation of the Growth of Environmentally Assisted Cracks at Flaws in Light Water Reactor Components With Complex Mechanical Condition

He Xue, Xiao-Yan Gong, Lingyan Zhao, Zhanpeng Lu, Tetsuo Shoji

Volume 1: Codes and Standards

DOI

2011

The Effect of the Stress and Strain in Stationary Small Crack Tips for the Different Crack Lengths

Xiurong Fang, He Xue, Wei Feng Tang, Lingyan Zhao

Volume 1: Codes and Standards

DOI

精选作品

期刊论文

Phase-Field Investigation of Dual-Crack Propagation Paths in Dissimilar Metal Welded Joints

Thread tooth modifications for optimizing load distribution in the inverted planetary roller screw mechanism

Crack-Tip Constraint Analysis of the Dissimilar Metal-Welded Joint and Constraint Match with Test Specimens

Prediction of Crack Propagation Directions in Dissimilar Metal‐Welded Joints Using Phase‐Field Models and Discussion of Its Mechanisms

The influences of Ag nanoparticles on voids growth and solderability about Sn3.0Ag0.5Cu/Cu solder joint

Ni and Sb improve the microstructure, mechanical properties, and solder joint reliability of Sn-3.0Ag-0.5Cu alloy

Improvement of heat aging resistance and tensile strength of SAC305/Cu solder joints by multi-element microalloying

Effect of Ag Doping on Mechanical Properties of Cu6Sn5 Intermetallic Compounds

Analysis of Crack Propagation Behaviors in RPV Dissimilar Metal Welded Joints Affected by Residual Stress

裂纹长度对焊接接头裂纹扩展驱动力的影响

An Investigation of a New Parameter Based on the Plastic Strain Gradient to Characterize Composite Constraint around the Crack Front at a Low Temperature

Modeling the Hydrogen Redistribution at the Grain Boundary of Misoriented Bicrystals in Austenite Stainless Steel

残余应力与外加载荷共同作用对裂尖前端应力场的影响

Influence of Ag content on the formation and growth of intermetallic compounds in Sn–Ag–Cu solder

残余应力对焊接接头裂尖蠕变性能的影响

随机因素对镍基合金应力腐蚀裂尖力学特性的影响（英文）

一次超载对裂纹前端残余应力重新分布的影响分析

Probability prediction of crack growth rate of environmentally assisted cracks of nickel-based alloys based on Latin hypercube sampling

Research on the Micro-Mechanical State at Tip of Environmentally Assisted Cracking Based on Latin Hypercube Sampling Method

Effects of Crystal Orientation and Grain Boundary Inclination on Stress Distribution in Bicrystal Interface of Austenite Stainless Steel 316L

Effects of Welded Mechanical Heterogeneity on Interface Crack Propagation in Dissimilar Weld Joints

几何拘束对镍基合金裂纹扩展速率影响的有限元分析

划痕诱发的镍基合金应力腐蚀裂尖扩展驱动力分析（英文）

考虑参数随机性的应力腐蚀裂尖力学特性分析

压水堆一回路环境中304不锈钢的蠕变特性分析

Three-Dimensional Analysis of the Effect of Out-Of-Plane Constraint on the Local Plastic Strain around Crack Front

Effects of Grain Orientation on Stress State near Grain Boundary of Austenitic Stainless Steel Bicrystals

膜致应力对应力腐蚀裂尖力学特性的影响（英文）

蠕变性能失配对应力腐蚀裂尖力学场的影响

氧化膜形状对镍基合金应力腐蚀裂尖应力应变的影响

高温水环境中镍基合金力学性能对裂尖力学化学效应的影响（英文）

应力强度因子对镍基合金应力腐蚀开裂裂尖力学特性的影响

Effects of creep on mechanical fields nearby crack tip in weld joints

应力强度因子对高温水环境中镍基合金裂尖电化学腐蚀电位的影响（英文）

核电焊接接头裂尖力学特征及环境致裂裂纹扩展速率研究

A quantitative prediction model of SCC rate for nuclear structure materials in high temperature water based on crack tip creep strain rate

Effects of Stress Intensity Factor on Electrochemical Corrosion Potential at Crack Tip of Nickel-Based Alloys in High Temperature Water Environments

Numerical investigation on stress corrosion cracking behavior of dissimilar weld joints in pressurized water reactor plants

焊接接头力学性能不均匀性对管道裂纹断裂参量的影响分析

Analysis on Mechanical Parameters at SCC Tip in Fusion Boundary Region of Dissimilar Weld Joint

Calculations and Modeling of Material Constants in Hyperbolic-Sine Creep Model for 316 Stainless Steels

Effect of Strength Matching of Welded Joint on Stress Corrosion Cracking in Nuclear Power Structures

Stress Corrosion Cracking Behavior of an Alloy 182-A533B Weld Joint with Continuous Material Properties

镍基合金应力腐蚀裂尖氧化膜力学特性分析

Effect of Welded Mechanical Heterogeneity on Local Stress and Strain Ahead of Growing Crack Tips in the Piping Welds

Effect of Mechanical Parameter Selection in Quantitative Estimation of the Growth of Environmentally Assisted Cracks at Flaws in Light Water Reactor Components With Complex Mechanical Condition

The Effect of the Stress and Strain in Stationary Small Crack Tips for the Different Crack Lengths

研究方向