李济顺

期刊论文

1. 李帅，薛玉君，王铭源，李济顺，白云华（2026）. 基于C#与OpenGL的磨机衬板作业装备运动特性分析. 《矿山机械》.DOI
2. 杨芳，郭旗文，马喜强，李济顺（2026）. 航空发动机主轴轴承双转子试验系统. 《轴承》.
3. Mingyuan Wang, Yu-Jun Xue, Ji-Shun Li, Shuai Li, Yunhua Bai (2026). Fast analytical path planning method for mill reline manipulator in confined environment. Robotics Auton. Syst..DOI
4. Mingyuan Wang, Yu-Jun Xue, Ji-Shun Li, Shuai Li, Yunhua Bai (2026). KAT: A kinematic analysis tool for manipulator simulation. Softw. Impacts.DOI
5. Mingyuan Wang, Yu-Jun Xue, Ji-Shun Li, Shuai Li, Yunhua Bai (2026). Deformation estimation and end compensation method for mill relining manipulator based on distributed measurement. Measurement.DOI
6. Mingyuan Wang, Yu-Jun Xue, Ji-Shun Li, Shuai Li, Yunhua Bai (2025). Online End Deformation Calculation Method for Mill Relining Manipulator Based on Structural Decomposition and Kolmogorov-Arnold Network. Machines.DOI
7. Mingyuan Wang, Yu-Jun Xue, Ji-Shun Li, Shuai Li, Yunhua Bai (2025). Digital Twin System for Mill Relining Manipulator Path Planning Simulation. Machines.DOI
8. Mingyuan Wang, Yu-Jun Xue, Ji-Shun Li, Shuai Li, Yunhua Bai (2025). A Fast and Robust Multistage Hybrid Algorithm for Inverse Kinematics of Redundant Mill Relining Manipulator. Journal of Field Robotics.DOI
9. 张景豪，余永健，薛玉君，李济顺（2024）. 高速圆柱滚子轴承瞬态热力耦合分析. 《制造业自动化》.
10. 王晓，薛玉君，程波，刘俊，李济顺（2024）. 矿石破碎颗粒黏结模型黏结键特征及表征. 《河南理工大学学报(自然科学版)》.
11. 符加春，薛玉君，王正国，李济顺（2024）. 提升设备液压制动器启闭特征参数的分段拟合提取方法. 《机床与液压》.
12. 刘俊，刘伟，薛玉君，程波，李济顺，卢志浩（2024）. 陶瓷球为磨矿介质的立式搅拌磨磨矿特性研究. 《矿山机械》.
13. 张若愚，余永健，李济顺，薛玉君（2024）. 加速工况角接触球轴承摩擦力矩仿真分析. 《机械与电子》.
14. 王铭源，王正国，李济顺，薛玉君（2024）. 层级式机械装备健康指数模型及管理系统构建. 《金属矿山》.
15. 殷新科，杨芳，李济顺，黎建涛（2024）. 偏载作用下RV减速器主轴承启停动态特性研究. 《机械强度》.
16. Ruoyu Zhang, Yong-Jian Yu, Ji-Shun Li, Yu-Jun Xue (2024). Influence of unstable working conditions on friction torque of angular contact ball bearings. Journal of Physics: Conference Series.DOI
17. 于海晓，司东宏，李济顺，薛玉君，时连卫（2023）. 基于热-力耦合的陶瓷球轴承摩擦力矩分析. 《组合机床与自动化加工技术》.
18. 殷新科，杨芳，李济顺，赵伟桦（2023）. 机器人RV减速器主轴承试验载荷谱编制. 《组合机床与自动化加工技术》.
19. 刘柯杰，王正国，李济顺，薛玉君（2023）. 面向矿山设备状态监测的边缘管理系统研发. 《软件》.
20. 袁峰，彭绘舒，秦东晨，李济顺（2023）. 精密机床试验台主轴系统的动态特性仿真与分析. 《机械设计与制造》.
21. 张景豪，余永健，薛玉君，李济顺（2023）. 高速圆柱滚子轴承保持架动态特性分析. 《现代制造工程》.
22. 刘伟，刘俊，程波，薛玉君，李济顺（2023）. 基于流固耦合的搅拌磨磨矿离散元仿真及试验研究. 《金属矿山》.
23. 李留政，王正国，刘贺伟，李济顺，薛玉君（2023）. 多卷筒提升装备液压制动器同步性能仿真. 《液压与气动》.
24. Mingyuan Wang, Ji-Shun Li, Yu-Jun Xue (2023). A New Defect Diagnosis Method for Wire Rope Based on CNN-Transformer and Transfer Learning. Applied Sciences.DOI
25. Mingyuan Wang, Ji-Shun Li, Yu-Jun Xue (2023). A New Weight-Based Dual Domain Adaptation Transfer Model for Bearing Fault Diagnosis Under Noisy and Cross-Domain Conditions. IEEE Access.DOI
26. 陈云鹏，杨芳，马喜强，李济顺，李明岩（2022）. 多致动器轴承预紧力加载控制仿真. 《制造业自动化》.
27. 周文渊，薛玉君，李济顺，刘文胜，李玉川（2022）. 风电增速箱轴承径向游隙的影响因素分析. 《组合机床与自动化加工技术》.
28. 李伦，金喜洋，李济顺，牛宝禛，黄伟（2022）. 基于灰色理论的风机增速箱轴承可靠性分析. 《组合机床与自动化加工技术》.
29. 王晓明，余永健，王东峰，薛玉君，李济顺（2022）. 角接触球轴承旋转精度数值仿真分析. 《组合机床与自动化加工技术》.
30. 李明岩，司东宏，余永健，李济顺，马喜强（2022）. 轴承试验机磁性离合机构的设计分析. 《组合机床与自动化加工技术》.
31. 王晓，薛玉君，程波，刘俊，GUAN Zhi-qiang，李济顺（2022）. 基础颗粒粒径对颗粒黏结模型精度的影响. 《中国有色金属学报》.
32. 王晓，薛玉君，程波，刘俊，官志强，李济顺（2022）. 基础颗粒数量组合对颗粒黏结模型精度的影响. 《河南科技大学学报(自然科学版)》.
33. 李明岩，司东宏，余永健，马喜强，李济顺（2022）. 轴承试验机磁性离合机构磁力装置的设计分析. 《机床与液压》.
34. 刘亚枫，薛玉君，李济顺，董汉杰，李玉川（2022）. 风电主轴轴承试验机轴系性能仿真分析. 《轴承》.
35. 段宇琛，薛玉君，李济顺，杨芳，马喜强（2022）. 角接触球轴承极限转速试验及温升预测方法. 《轴承》.
36. 李俊，李济顺，HAL Gurgenci，李伦，GUAN Zhiqiang，杨芳（2022）. 混沌区间多目标粒子群优化算法及其应用. 《机械科学与技术》.
37. 刘柯杰，王正国，李济顺，薛玉君（2022）. 基于边缘计算的矿井提升机状态监测系统研发. 《矿山机械》.
38. 李魁，隋新，刘春阳，李济顺，徐彦伟，杨芳（2022）. 基于变分模态分解和卷积神经网络融合的滚动轴承故障诊断方法. 《机械传动》.
39. 牛宝禛，李伦，李济顺，金喜洋，练松伟（2022）. 基于多因素的风电主轴轴承疲劳寿命分析. 《轴承》.
40. Jun Li, H. Gurgenci, Zhi-Qiang Guan, Ji-Shun Li, Yu-Jun Xue, Lun Li (2022). Thermal Management and Dynamic Performance of a Cooler Design for the Supercritical CO2 Turbine Shaft Cooling. Frontiers in Energy Research.DOI
41. Mian Zhang, Xi-Qiang Ma, Nan Guo, Yu-Jun Xue, Ji-Shun Li (2022). Calculation and Lubrication Characteristics of Cylindrical Roller Bearing Oil Film with Consideration of Thermal Effects. Coatings.DOI
42. Jun Yu Li, H. Gurgenci, Zhi-Qiang Guan, Ji-Shun Li, Lun Li, Yu-Jun Xue (2022). Multi-objective optimization of a small scale SCO2 turbine rotor system with a shaft cooler. Mechanics & Industry.DOI
43. Y. Yu, Ji-Shun Li, Yu-Jun Xue (2022). Influence of roundness errors of bearing components on rotational accuracy of cylindrical roller bearings. Scientific Reports.DOI
44. 王晓，薛玉君，刘俊，杨纪昌，邹声勇，Zhiqiang GUAN，李济顺（2021）. 基于落重试验的离散元多颗粒黏结建模技术. 《中国有色金属学报》.
45. 刘义，李济顺（2021）. 矿用圆锥滚子轴承动力学分析. 《煤矿机械》.DOI
46. 杜博锋，李伦，李济顺，陈树声（2021）. 电传动推土机履带-地面接触力学仿真分析. 《机械设计与制造》.DOI
47. 陈长业，李济顺，余永健，薛玉君（2021）. 高速角接触球轴承油气润滑温升特性研究. 《机械设计与制造》.DOI
48. 许世钰，李伦，李济顺，牛宝禛，金喜洋（2021）. 精密机床角接触球轴承打滑特性仿真分析. 《轴承》.DOI
49. 郑培培，李伦，李济顺，GURGENCI Hal，李俊，陈稳，许世钰（2021）. 超临界CO2透平机主轴冷却装置静动态特性分析. 《机械科学与技术》.DOI
50. 郑培培，李伦，李济顺，许世钰（2021）. 超临界二氧化碳涡轮机主轴静压轴承承载特性分析. 《轴承》.DOI
51. 李杨，司东宏，余永健，李济顺（2021）. 可变角度径向加载下的轴肩轴承有限元分析. 《机床与液压》.
52. Xi-Qiang Ma, Fang Yang, Ji-Shun Li, Yu-Jun Xue, Zhi-Qiang Guan (2021). Fatigue life assessment method of in-service mechanical structure.DOI
53. Jun Yu Li, H. Gurgenci, Ji-Shun Li, Zhi-Qiang Guan, Lun Li, Yu-Jun Xue (2021). Numerical investigation on the cooling performance of a novel jet cooler design for a supercritical CO2 turbine rotor shaft cooling. Mechanics & Industry.DOI
54. X. Zheng, Yumei Hu, Biwen Zhou, Ji-Shun Li (2021). Modelling of the hysteretic bending behavior for helical strands under multi-axial loads.DOI
55. Li-Hong Li, Yu-Jun Xue, Ji-Shun Li (2021). Copula method of the kinematic accuracy of cylindrical roller bearing.DOI
56. Jun Yu Li, H. Gurgenci, Ji-Shun Li, Lun Li, Zhi-Qiang Guan, Fang Yang (2021). Optimal design to control rotor shaft vibrations and thermal management on a supercritical CO2 microturbine. Mechanics & Industry.DOI
57. M. Uddin, H. Gurgenci, Zhi-Qiang Guan, A. Klimenko, Jun Li, Ji-Shun Li, Lun Li (2021). Design a cooling pillow to support a high-speed supercritical CO2 turbine shaft.DOI
58. Ji-Shun Li, Yu-Jun Xue (2021). In uence of manufacturing errors of bearing components on rotational accuracy of cylindrical roller bearings.
59. 凡娜娜，杨芳，李济顺，邹声勇（2020）. 缠绕式提升机钢丝绳横向空间振动的视觉测量方法与试验研究. 《机械科学与技术》.DOI
60. 李东亮，李济顺，邹声勇，马喜强（2020）. 基于单目视觉的钢丝绳横向振动测量方法. 《机械设计与制造》.DOI
61. 贾亚洲，李济顺，郭楠，杨芳（2020）. 自行式大型矿磨衬板更换机械手的设计与仿真. 《机床与液压》.
62. 于浩凯，王晓，李济顺，薛玉君，邹声勇，刘俊（2020）. 磨介粒径与球磨机磨矿效率关系研究. 《矿山机械》.DOI
63. 陈稳，李伦，李济顺，郑培培，许世钰（2020）. 钢丝绳股内钢丝张力分布及钢丝间摩擦力研究. 《矿山机械》.DOI
64. 许亚萍，杨芳，李济顺，邹声勇（2020）. 双绳缠绕式提升机钢丝绳张力仿真及试验验证. 《矿山机械》.DOI
65. 李伦，杨少东，李济顺，陈稳（2020）. SiC单晶加工参数优化及表面粗糙度预测. 《机械设计与制造》.DOI
66. M. M. Ehsan, Sam Duniam, Ji-Shun Li, Zhi-Qiang Guan, H. Gurgenci, A. Klimenko (2020). A comprehensive thermal assessment of dry cooled supercritical CO2 power cycles.DOI
67. 司卓一，余永健，马伟，李济顺，薛玉君（2019）. 圆柱滚子轴承径向跳动的仿真分析. 《轴承》.DOI
68. 罗昂昂，马伟，李济顺（2019）. 预应力张拉偏差耦合同步控制的仿真. 《筑路机械与施工机械化》.
69. 刘义，邹声勇，李济顺（2019）. 基于虚拟样机技术的摩擦式提升机动力学仿真. 《矿山机械》.DOI
70. 刘义，邹声勇，李济顺（2019）. 基于有限单元法的溢流型球磨机可靠性分析. 《矿山机械》.DOI
71. 任建磊，李济顺，杨芳，邹声勇（2019）. 多绳缠绕式提升系统纵向振动特性仿真分析. 《机床与液压》.
72. 陈长业，李济顺，余永健，薛玉君（2019）. 喷嘴结构对油气润滑环状流特性的影响. 《制造技术与机床》.DOI
73. 余永健，陈国定，李济顺，薛玉君（2019）. 滚子几何误差对圆柱滚子轴承旋转精度的影响. 《西北工业大学学报》.
74. 崔咏，李济顺，隋新（2019）. 一种MEMS的微小滚动体动平衡测试系统. 《机械设计与制造》.DOI
75. 董帅，马喜强，马伟，李济顺，薛玉君（2019）. 三点法圆柱度误差分离技术的实验验证. 《2019航空装备服务保障与维修技术论坛暨中国航空工业技术装备工程协会年会》.DOI
76. Lun Li, Bo-Feng Du, S. Yang, Ji-Shun Li (2019). Research on Power Characteristics Matching of Electric Drive Crawler Bulldozer. 2019 3rd International Conference on Electronic Information Technology and Computer Engineering (EITCE).DOI
77. Li-Hong Li, Ji-Shun Li, Yu-Jun Xue, Tong-Shuai Yu, Yong-Jian Yu (2019). Copula Estimation Method of the Running Accuracy of Ball Bearing. American Journal of Mechanical and Industrial Engineering.DOI
78. Jian-Yong Wang, Ji-Shun Li, H. Gurgenci, A. Veeraragavan, X. Kang, K. Hooman (2019). Computational investigations on convective flow and heat transfer of turbulent supercritical CO2 cooled in large inclined tubes. Applied Thermal Engineering.DOI
79. Xi-Qiang Ma, Fang Yang, Ji-Shun Li, Zhi-Qiang Guan, H. Gurgenci (2019). Precision Cylindricity Error Measurement System Design and Error Analysis. International Conference on Information Control Systems & Technologies.DOI
80. Ya-Zhou Jia, Ji-Shun Li, Nan Guo, H. Yu, Bo-Feng Du, Chang-ye Chen (2019). Design and Research of Eight-Degree-of-Freedom Heavy Manipulator. DEStech Transactions on Computer Science and Engineering.DOI
81. H. Gurgenci, Ji-Shun Li, Zhi-Qiang Guan (2019). Bearing and Seal Selection for a High-Temperature Supercritical CO2 Turbine.DOI
82. Lun Li, Pei-Pei Zheng, Shi-Yu Xu, Ji-Shun Li, Wen Chen, Bao-Zhen Niu, Xi-Yang Jin (2019). CFD Analysis of Supercritical CO2 Turbine Shaft Supporting Device. 2019 2nd World Conference on Mechanical Engineering and Intelligent Manufacturing (WCMEIM).DOI
83. Ji-Shun Li, Xi-Qiang Ma, X. Sui, Fang Yang, Zhi-Qiang Guan, H. Gurgenci (2019). Dynamic Balance Testing System for Micro-Roller Based on MEMS. International Conference on Information Control Systems & Technologies.DOI
84. Y. Yu, Guo-Ding Chen, Ji-Shun Li, Yu-Jun Xue (2019). Influence of Geometric Error of Rollers on Rotational Accuracy of Cylindrical Roller Bearings. Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University.DOI
85. M. M. Ehsan, Sam Duniam, Ji-Shun Li, Zhi-Qiang Guan, H. Gurgenci, A. Klimenko (2019). Effect of cooling system design on the performance of the recompression CO2 cycle for concentrated solar power application. Energy.DOI
86. Nana Fan, Fang Yang, Ji-Shun Li, Sheng-Yong Zou (2019). Visual Detection Method for Spatial Transverse Vibration Displacement of Wire Rope in Multi-point Synchronous Hoisting System. ACM Cloud and Autonomic Computing Conference.DOI
87. Pei-Xin Dong, Xiaoxiao Li, K. Hooman, Yu-Biao Sun, Ji-Shun Li, Zhi-Qiang Guan, H. Gurgenci (2019). The crosswind effects on the start-up process of natural draft dry cooling towers in dispatchable power plants. International Journal of Heat and Mass Transfer.DOI
88. 魏建波，薛玉君，余永健，李济顺，庞碧涛（2018）. 轴承滚子尺寸误差与径向跳动的Copula建模与分析. 《组合机床与自动化加工技术》.
89. 余永健，陈国定，李济顺，薛玉君（2018）. 轴承零件几何误差对圆柱滚子轴承回转误差的影响:第一部分 计算方法. 《机械工程学报》.
90. 罗昂昂，马伟，李济顺（2018）. 预应力张拉电液伺服执行系统的仿真. 《筑路机械与施工机械化》.
91. 殷觊恺，李济顺，邹声勇，薛玉君（2018）. 钢丝绳股内钢丝弯曲张力有限元分析. 《机械设计与制造》.
92. 冯凯，薛玉君，杨芳，李济顺，杜波（2018）. 矿井提升机罐道钢丝绳动刚度计算分析. 《煤炭技术》.
93. 王建伟，马伟，李济顺（2018）. 多绳缠绕式超深井提升机提升段钢丝绳动态张力检测方案研究. 《煤炭技术》.
94. Xi-Qiang Ma, Fang Yang, Yu-Jun Xue, Ji-Shun Li (2018). On-Line Monitoring Method for Fatigue of Mechanical Structure Parts.DOI
95. Ji-Shun Li, Yong-Jian Yu, Yu-Jun Xue, Yuan-Kun Zhou, Zhi-Qiang Guan (2018). Effect of Geometric Error of Inner Raceway on Motion of Cylindrical Roller Bearings Under Radial Load.DOI
96. Yong-Jian Yu, Ji-Shun Li, Guo-Ding Chen, Yu-Jun Xue, Zhuo-Yi Si, H. Gurgenci (2018). Research on Motion Error of Cylindrical Roller Bearings Under Radial Load. Volume 4: 23rd Design for Manufacturing and the Life Cycle Conference; 12th International Conference on Micro- and Nanosystems.DOI
97. Shuai Dong, Xi-Qiang Ma, Wei Ma, Ji-Shun Li, Yu-Jun Xue (2018). A New Method for Measuring Outer Diameter of Thin-Walled Bearing. ACM Cloud and Autonomic Computing Conference.DOI
98. Zhi-Qiang Xi, Zhenqing Wu, Zhong-Li Li, Ji-Shun Li (2018). Research on Dynamic Shift Rule of Agricultural Tractor PST Based on Maximum Productivity.DOI
99. X. Sui, Chun-Yang Liu, Ji-Shun Li, Yu-Jun Xue, Y. Yu, Yong Cui (2018). Laser-based measurement for micro-unbalance of cylindrical rollers of the high-speed precision rolling bearings. Cluster Computing.DOI
100. Yi-Wei Wu, Zhili Zhou, Zhi-Qiang Xi, Ji-Shun Li (2018). Tractor Cab Virtual Modeling and Ergonomic Evaluation Based on JACK. Volume 3: 20th International Conference on Advanced Vehicle Technologies; 15th International Conference on Design Education.DOI
101. Ya-Zhou Jia, Ji-Shun Li, Nan Guo, Qiuhong Jia, Bo-Feng Du, Chang-ye Chen (2018). Design and Research of Small Crawler Fire Fighting Robot. ACM Cloud and Autonomic Computing Conference.DOI
102. Chang-ye Chen, Ji-Shun Li, Y. Yu, Yu-Jun Xue (2018). Study on the Effect of Nozzle Parameters on Annular Flow in Oil-Air Lubrication. DEStech Transactions on Engineering and Technology Research.DOI
103. Chun-Yang Liu, Yu-Jun Xue, Xi-Qiang Ma, X. Sui, Dong-Hong Si, Ji-Shun Li (2017). Precision Cylindricity Error Measurement System Design and Surface Topography Reconstruction. 2017 Second International Conference on Mechanical, Control and Computer Engineering (ICMCCE).DOI
104. Y. Yu, Guo-Ding Chen, Ji-Shun Li, Yu-Jun Xue, B. Pang (2017). Prediction Method for the Radial Runout of Inner Ring in Cylindrical Roller Bearings.DOI
105. Wei Ma, Jianwei Wang, Ji-Shun Li (2017). Dynamic Tension Measurement System for Wire Rope of a Ultra-deep Multi Rope Winding Hoist.DOI
106. Lu Yan, Guohua Cao, Naige Wang, Ji-Shun Li (2017). Lateral stiffness and deflection characteristics of guide cable with multi-boundary constraints.DOI
107. Xiao Wang, X. Sui, Yu-Jun Xue, Ji-Shun Li, Wei Ma, Chun-Yang Liu (2017). Investigation on Measurement for Micro Unbalance of Tiny Cylindrical Rollers of the High-Speed Precision Rolling Bearings. 2017 Second International Conference on Mechanical, Control and Computer Engineering (ICMCCE).DOI
108. K. Feng, Yu-Jun Xue, Fang Yang, Ji-Shun Li, Wei Ma (2017). Analysis on Calculation of Transverse Swing Amount of Mine Hoisting Container under Flexible Constrains.DOI
109. Y. Yu, Guo-Ding Chen, Ji-Shun Li, Yu-Jun Xue (2017). Research on Rotational Accuracy of Cylindrical Roller Bearings.DOI
110. Jian-Bo Wei, Yu-Jun Xue, Y. Yu, Ji-Shun Li, B. Pang (2017). Statistical Analysis on Diameter Error of Bearing Cylindrical Roller with Different Precision and Levels.DOI
111. Li-Hong Li, Ji-Shun Li, Yu-Jun Xue, Tong-Shuai Yu, Y. Yu (2017). Distribution estimation method of the radial run-out of the antifriction bearing. International Conference on Advanced Mechatronic Systems.DOI
112. Guohua Cao, Xiang Cai, Naige Wang, Weihong Peng, Ji-Shun Li (2017). Dynamic Response of Parallel Hoisting System under Drive Deviation between Ropes with Time-Varying Length.DOI
113. Ji-Shun Li, Y. Yu, Yu-Jun Xue (2017). Forecast for Radial Runout of Outer Ring in Cylindrical Roller Bearing.DOI
114. Y. Yu, Guo-Ding Chen, Ji-Shun Li, Yu-Jun Xue (2017). A method to predict the radial runout of outer ring in cylindrical roller bearings.DOI
115. Yongxiang Dong, Dong-Hong Si, Yu-Jun Xue, Ji-Shun Li (2017). Parametric Design of Complex Elastic Components. 2017 Second International Conference on Mechanical, Control and Computer Engineering (ICMCCE).DOI
116. Jian Ren, Ji-Shun Li, Fang Yang, Jie Chen (2017). Mechanical Simulation of Multi-rope Hoisting System based on Recurdyn.DOI
117. Lin Xia, Ji-Shun Li, Wei Ma, H. Gurgenci, Zhi-Qiang Guan, Pei Wang (2017). Water Consumption Comparison Between a Natural Draft Wet Cooling Tower and a Natural Draft Hybrid Cooling Tower—An Annual Simulation for Luoyang Conditions.DOI
118. 陈振强，薛玉君，余永健，李济顺，马伟（2016）. 滚子直径误差及排布对轴承径向跳动的影响. 《组合机床与自动化加工技术》.
119. 冯浩亮，马伟，李济顺，邹声勇，薛玉君（2016）. 超深矿井钢丝绳张力平衡装置动态响应分析. 《河南科技大学学报(自然科学版)》.
120. Yi Liu, Fang Yang, Ji-Shun Li, Guo-Ding Chen (2016). Research on Modeling of Friction Drive Characteristics for Friction Hoist.
121. Jingrui Fang, Ji-Shun Li, Fang Yang, Yu-Jun Xue (2016). A Control Method of the Force Loading Electro-hydraulic Servo System Based on BRF.DOI
122. Yi Liu, Fang Yang, Ji-Shun Li, Guo-Ding Chen（2016）. 摩擦巻上げの摩擦特性をモデル化した。【JST・京大機械翻訳】.
123. Wei Ma, H. Feng, Ji-Shun Li, Yu-Jun Xue, Fang Yang, Sheng-Yong Zou (2016). ANALYSIS ON APPLICABILITY OF HYDRAULIC TENSION BALANCING DEVICE FOR ULTRA-DEEP MINE.DOI
124. Y. Yu, Ji-Shun Li, Guo-Ding Chen, Yu-Jun Xue, Yonggang Liu, Wen Si (2016). Numerical Calculation and Experimental Research of Rotational Accuracy on Cylindrical Roller Bearing.DOI
125. Wei Ma, Yu Jing, Ji-Shun Li, Yu-Jun Xue, Fang Yang, Sheng-Yong Zou (2016). PERFORMANCE OF ACTIVE ROPE-ADJUSTING EQUIPMENT FOR FLOATING HEAD SHEAVE.DOI
126. Hong-Biao Han, Jing-Di Guo, Yu-Jun Xue, Ji-Shun Li, Wei Ma, X. Sui (2016). Micro arc overlaying system.
127. Yuan-Kun Zhou, Yu-Jun Xue, Zhen-Qiang Chen, Y. Yu, Ji-Shun Li, Wei Ma (2016). Effect of Geometric Error of Bearing Parts on the Radial Runout of Rolling Bearing.DOI
128. Jinjie Wang, Guohua Cao, Zhen-Cai Zhu, Weihong Peng, Ji-Shun Li (2016). Lateral and torsional vibrations of cable-guided hoisting system with eccentric load.DOI
129. Y. Yu, Ji-Shun Li, Guo-Ding Chen, Yu-Jun Xue, Yong-Gang Liu, Wen-Xiang Si（2016）. 円筒ローラ軸受の回転精度の数値計算と実験研究【JST・京大機械翻訳】.
130. Yong Cui, Ji-Shun Li, X. Sui, Wei Ma (2016). Study on Key Technologies in Product Lifecycle Data Management System for Spindle Bearings of Numerically Controlled Machine Tool.DOI
131. Yi Liu, Ji-Shun Li, Chang Xia (2016). Kinematics Simulation of Multi–rope Friction Winder Based on Flexible Multi-body Dynamics.DOI
132. Yi Liu, Fang Yang, Chang Xia, Ji-Shun Li（2016）. 摩擦巻上げの横振動特性【JST・京大機械翻訳】.
133. Ji-Shun Li, T. Song, Xiaoxiao Li, H. Gurgenci, Zhi-Qiang Guan (2015). Design of a natural draft dry cooling tower for a 30- mwe concentrating solar thermal plant using a supercritical CO2 cycle.
134. Chun-Yang Liu, Ji-Shun Li, Yu-Jun Xue, Wei Ma, Sui Xin, Fang Yang, Xi-Qiang Ma (2015). Development of On-Line Condition Monitoring System for Wind Turbines in Plant Level.DOI
135. Yu-Jun Xue, Chun-Yang Liu, Ji-Shun Li, Wei Ma, Sui Xin, Fang Yang, Xi-Qiang Ma (2015). Fabrication and Tribological Behavior of Ni-ZrO2 Nanocomposite Coatings Prepared by Electrodeposition in Ultrasonic Field.DOI
136. 张文治，李济顺，刘义，王大举（2014）. 倒立式车磨复合机床运动精度的动力学. 《河南科技大学学报(自然科学版)》.
137. X. Sui, Chun-Yang Liu, Ji-Shun Li, Wei Ma, Hai-Jun Jiang (2014). Application of the Displacement Laser Sensor in Super Tiny Cylindrical Roller’s Dynamic Unbalance Measurement.DOI
138. Li-Tao Chen, Yu-Jun Xue, Yi Liu, Ji-Shun Li (2014). Modal Analysis of Oversize Ball Mill Tube Based on ANSYS.DOI
139. Hong-Biao Han, Yong-Gang Liu, Yun Gao, He Liu, Ji-Shun Li, Wei Ma, Yu-Jun Xue (2014). Multi-pulse digital control type electrospark deposition surfacing power supply.
140. Yu-Jun Xue, Shuang-Shuang Liu, Ji-Shun Li, Fang Yang (2014). Damage Identification of Low Carbon Steel under Tensile Based on Elastic Modulus.DOI
141. 徐阳阳，薛玉君，李济顺，刘春阳，杨芳（2014）. 超声脉冲电沉积镍–氧化锆–氧化铈纳米复合镀层. 《电镀与涂饰》.
142. Shuang-Shuang Liu, Yu-Jun Xue, Yang Xu, Ji-Shun Li (2014). Effect of Pulse Electrodeposition Parameters on Microhardness of Ni-ZrO2-CeO2 Nanocomposite Coating.DOI
143. 杨芳，刘义，李济顺（2013）. 机械工程测试技术教学实验内容的探索. 《中国现代教育装备》.
144. 李献会，薛玉君，敖正红，李济顺，司东宏（2013）. 组合超声条件下电沉积Ni-Nd2O3纳米复合镀层的耐腐蚀性能. 《表面技术》.
145. 隋新，刘扬，韩红彪，李济顺（2013）. 网络式风电监控数据采集系统. 《河南科技大学学报(自然科学版)》.
146. Ji-Shun Li, X.-H. Guo, Jun Luo, H.-Y. Li, Y.-Q. Wang (2013). Analytical Study on Inherent Properties of a Unidirectional Vibrating Steel Strip Partially Immersed in Fluid.DOI
147. Yang Xu, Yu-Jun Xue, Ji-Shun Li, Yi Liu, Fang Yang (2013). Technology on Ni-ZrO2-CeO2 Nanocomposites by Pulse Electroforming in an Ultrasonic Field.DOI
148. Yang Xu, Yu-Jun Xue, Fang Yang, Chun-Yang Liu, Ji-Shun Li (2013). Preparation of Ni-ZrO2-CeO2 Nanocomposite Coatings by Pulse Electrodeposition.DOI
149. Ji-Shun Li (2013). Analysis on fatigue of ball mill based on finite element method.
150. Ji-Shun Li, Ha Jiang, Chun-Yang Liu, Wei Ma, Yi Liu, Dong-Hong Si, X. Sui, Fang Yang, Wei-Ming Pan, Li-Hong Li (2013). Micro-rotor balancing measure swing frame.
151. Ji-Shun Li, Xian-Qing Lei, Yu-Jun Xue, Wei-Min Pan (2013). Geometric Approximation Searching Algorithm for Spatial Straightness Error Evaluation.DOI
152. 杨冉，田亚芳，李济顺（2012）. 一种分布式网络化数据采集系统的设计. 《河南科技大学学报(自然科学版)》.
153. 薛玉君，李献会，敖正红，李济顺（2012）. 组合超声场下电沉积Ni-Nd2O3纳米复合镀层的摩擦磨损性能. 《河南科技大学学报(自然科学版)》.
154. Ku Xiangchen, Ji-Shun Li, Wei Ma, Yu-Jun Xue (2012). Data Acquisition System for Press Machine.
155. Guoqiang Zheng, Zhao Liang, Ji-Shun Li (2012). Optimization of an Intelligent Controller for Parallel Autonomous Parking.DOI
156. Zhao Liang, Guoqiang Zheng, Ji-Shun Li (2012). Automatic parking path optimization based on Bezier curve fitting. 2012 IEEE International Conference on Automation and Logistics.DOI
157. Ji-Shun Li, Yi Liu (2012). Study on the rigid-flexible couple of drum brake system. International Conference on Crowd Science and Engineering.DOI
158. Jishun Li (2012). The Impact of Axial Clearance on the Contact Stress of Tapered Roller Bearings. Machinery Design and Manufacture.
159. Le-Yi Zhang, Yu-Jun Xue, Ji-Shun Li, Wei Ma (2012). Finite Element Analysis on Convexity for Tapered Roller with Arc-Line Modification Profile.DOI
160. Zhao Liang, Guoqiang Zheng, Ji-Shun Li (2012). Application of Fuzzy Control Strategy in Automatic Parking Path Planning. International Conference on Intelligent Human-Machine Systems and Cybernetics.DOI
161. Zheng-Hong Ao, Yu Xue, Xian-Hui Li, Ji-Shun Li (2012). Preparation of Ni-Nd2O3 Nanocomposite Coatings by Electrodeposition under Dual-Frequency Ultrasound.DOI
162. Y. Yu, Yong-Gang Liu, Ji-Shun Li, Yu-Jun Xue, X. Sui, Wei Ma (2012). Device and method for testing vibration isolation performance of corrugated pipe under free work condition.
163. 薛玉君，司东宏，刘红彬，李济顺，兰明明（2011）. 电沉积方式对Ni-CeO2纳米复合镀层摩擦磨损性能的影响. 《中国有色金属学报》.
164. Xian-Hui Li, Yu Xue, De-Ying Zhang, Ji-Shun Li (2011). Effect of Ultrasound Action Modes on the Oxidation Resistance of Ni-Nd2O3 Nanocomposite Coatings.DOI
165. Hongbin Liu, Ji-Shun Li, Yu-Jun Xue, Wei Ma (2011). Study on Load Distribution Calculating Method of Slewing Bearing with the Link Elements.DOI
166. Yi Liu, Ji-Shun Li, Bao Wang (2011). 3D Finite Element Simulation on During Shield Tunneling.DOI
167. Weiwei Xu, Hongbin Liu, Yu-Jun Xue, Ji-Shun Li (2011). Strength analysis for pre-stressed bolted joints of turntable bearings. Proceedings of 2011 International Conference on Electronic & Mechanical Engineering and Information Technology.DOI
168. Xian-Qing Lei, Hong-Wei Song, Yu-Jun Xue, Ji-Shun Li, Jia Zhou, Ming-De Duan (2011). Method for cylindricity error evaluation using Geometry Optimization Searching Algorithm.DOI
169. De-Ying Zhang, Yu Xue, Xian-Hui Li, Ji-Shun Li (2011). Corrosion Resistance of Ni-CeO2 Nanocomposite Coating Prepared by Electrodeposition with Rotating Cathode in an Ultrasonic Field.DOI
170. Guo-Feng Wang, Hang Li, Dong-Hong Si, Yu-Jun Xue, Hao Fan, Ji-Shun Li (2011). Study on a Method for Measuring the Attitude of Protable Three-Coordinate Equipment Based on Monocular Vision.DOI
171. Ji-Shun Li (2011). System of acquiring pressure and displacement data based on RS485.
172. Ji-Shun Li (2011). Collision detection in spring-coiling simulation system.
173. Lun Li, Dong-Hong Si, Ji-Shun Li, Y. Yu (2011). Three-Dimensional Modeling of Heat Flow Field for Hot Dry Rock Crannies.DOI
174. Xian-Qing Lei, Chunyang Zhang, Yu-Jun Xue, Ji-Shun Li (2011). Roundness error evaluation algorithm based on polar coordinate transform.DOI
175. Jishun Li (2011). NC system research of spring coiling machine based on movement controller. Manufacturing Technology & Machine Tool.
176. Xun Mao, Ji-Shun Li, Yi Liu (2011). Dynamics Simulation for Horizontal-Axis Wind Turbines.DOI
177. Yong-Gang Liu, Ji-Shun Li, Wen-Xiang Shi, Xian-Zhao Jia (2011). An Algorithm to Prediction the Radial Runout of Cylindrical Roller Bearings.DOI
178. Hong-Bin Liu, Lun Li, Ji-Shun Li, Ming-De Duan, Yu-Jun Xue, Xin Sui, Hong-Biao Han (2011). Metal electro-deposition method.
179. Hao Fan, Hang Li, Dong-Hong Si, Yu-Jun Xue, Guo-Feng Wang, Ji-Shun Li (2011). Synthesis Error Analysis of NC Manufacturing and Error Prediction Modelling Based on BP Neural Network Technology.DOI
180. Y. Liu, Ji-Shun Li, Xian-Zhao Jia, Wei-Min Pan, Zhiming Liao (2011). Simulation the Heat Flow Field in Cooler of Rotary Calcining Kiln. International Conference on Intelligent Computing.DOI
181. Ji-Shun Li (2011). Simulation and analysis on vibration characteristics of multilayer bellows under pressure loads.
182. Sang-Ang Yao, Hang Li, Dong-Hong Si, Yu-Jun Xue, Ji-Shun Li (2011). Head Surface Reconstruction and Correction of Reverse Engineering Based on CATIA's.DOI
183. Yi Liu, Ji-Shun Li (2011). Finite Element Analysis of High - Pressure Grinding Mill.DOI
184. Ji-Shun Li, Yu-Jun Xue, X. Sui, Chun-Yang Liu, Wei Ma, Hong-Bin Liu (2011). Method for estimating structure fatigue state of in-service mechanical equipment.
185. 郭亮，李济顺，韩红彪（2010）. 一种SPI转TCP/IP协议的数据传输方法. 《河南科技大学学报(自然科学版)》.
186. 刘红彬，余永健，李济顺，薛玉君，马伟（2010）. 面接触纹理微单元对油膜承载能力的影响. 《河南科技大学学报(自然科学版)》.
187. 薛玉君，刘红彬，兰明明，库祥臣，李济顺（2010）. 超声条件下脉冲电沉积Ni-CeO2纳米复合镀层的高温抗氧化性. 《中国有色金属学报》.
188. 刘红彬，牛荣军，薛玉君，马伟，李济顺（2010）. 表面纹理对径向滑动轴承油膜承载能力的影响. 《润滑与密封》.
189. 申晨，薛玉君，库祥臣，刘义，李济顺（2010）. 超声波对Ni-ZrO2纳米复合镀层微观结构和显微硬度的影响. 《机械工程材料》.
190. 罗建伟，李济顺（2010）. 基于误差分离技术的圆柱度测量系统. 《河南科技大学学报(自然科学版)》.
191. Xian-Qing Lei, Yu-Jun Xue, Ji-Shun Li, Wei Ma, Ming-De Duan (2010). Geometrical Optimization Searching Algorithm for Evaluating Conicity Error.DOI
192. Jishun Li (2010). Application of Expert System in Drawing up Spring Coiling Craft. Machine Tool & Hydraulics.
193. Hong-Biao Han, Z. Shang, Ji-Shun Li (2010). CNC Machining Methods of Drum with Fold Line Grooves.DOI
194. Ku Xiangchen, Ji-Shun Li, Wei Ma, Lun Li (2010). Development of Lebus groove CNC based on PMAC. International Conference on Computer Application and System Modeling.DOI
195. Ji-Shun Li (2010). High temperature oxidation resistance of Ni-CeO_2 nanocomposite coatings by pulse electrodeposition under ultrasound condition.
196. Lun Li, Ji-Shun Li, F. Du, Dong-hong Si (2010). Building Virtual Reality Design System Based on DIVISION Mockup Software. International Conference on Electrical and Control Engineering.DOI
197. Yu-Jun Xue, Hong-Bin Liu, Ming-Ming Lan, Ji-Shun Li, Hang Li (2010). Effect of different electrodeposition methods on oxidation resistance of Ni–CeO2 nanocomposite coating.DOI
198. Ji-Shun Li, L.-H. Chen, L. Li (2010). Parametric Design of Tractor Configuration Using API Based on CATIA.DOI
199. Hong-Biao Han, Ji-Shun Li (2010). An anti-jamming counting approach for pulse signal of displacement sensor. International Conference on Computer Application and System Modeling.DOI
200. He-Lei Zhu, Hang Li, Yu-Jun Xue, Song-Ge Yang, Ji-Shun Li (2010). Marking-Points Matching and Tracking Methods in Micro-table Posture Measurement System. International Conference on Measuring Technology and Mechatronics Automation.DOI
201. Xian-Qing Lei, Ji-Shun Li, Yu-Jun Xue, Wei Ma, Ming-De Duan (2010). Mesh Searching Algorithm for Evaluating Cylindricity Error.DOI
202. Hong-Bin Liu, Lun Li, Yu-Jun Xue, Ji-Shun Li, Wei Ma (2010). Effect of Different Textured Surfaces on Lubricating Characteristics of Area Contact Friction Pairs.DOI
203. Wei-Min Pan, Y. Yu, Ji-Shun Li, Feng Xu (2010). A New Method of CMM Inspect Path Planning for Precision Generalized Helicoid.DOI
204. Lun Li, Ji-Shun Li, Sheng-Qi Zhang, Wei Ma, Yu-Jun Xue (2010). Research on Heat Exchange Characteristics Between Rock and High-Pressure Fluid Through the Cranny Among Dry Hot Rocks.DOI
205. Hong-Bin Liu, Hong-Biao Han, Yu-Jun Xue, Ji-Shun Li (2010). Influence of Laser Surface Texturing Distribution Patterns on the Hydrodynamic Lubrication.DOI
206. F. Du, Ji-Shun Li, Lun Li, Yu-Jun Xue, Yong-Gang Liu, Xian-Zhao Jia (2010). Optimum control for active steering of vehicle based on H∞ model following technology. International Asia Conference on Informatics in Control, Automation and Robotics.DOI
207. F. Du, Ji-Shun Li, Lun Li, Dong-hong Si (2010). Robust Control Study for Four-Wheel Active Steering Vehicle. International Conference on Electrical and Control Engineering.DOI
208. Hongbin Liu, Ji-Shun Li, Yu-Jun Xue, Wei Ma (2010). Study on the Friction Characteristics of Different Lubrication Modes under Alternating Magnetic Field.DOI
209. Ming-De Duan, Xin Liu, Wei Ma, Ji-Shun Li (2010). Integration of Multi-View Data Based on Auxiliary Reference Plane.DOI
210. Yu-Jun Xue, Gong-Ban Liu, Meng-Meng Lan, G. Han, Ji-Shun Li（2010）. 超声场中脉冲电沉积Ni-CeO 2 纳米复合镀层的耐蚀性.DOI
211. Wei-Min Pan, Ji-Shun Li, Wan-Qiang Liu, Ying-Chun Li (2010). Reverse modeling of the small modulus internal gear based on CMM inspecting. International Conference on Computer Application and System Modeling.DOI
212. S.-G. Yang, Hang Li, Yu-Jun Xue, H.-L. Zhu, Ji-Shun Li (2010). Research on Measuring the Micro-Table Position and Pose Based on Binocular Vision.DOI
213. Yu-Jun Xue, Chen Shen, Ji-Shun Li, Hang Li, Dong-Hong Si (2010). Corrosion Resistance of Ni-Y2O3 Composite Coating Prepared by Electrodeposition under Ultrasonic Condition.DOI
214. Yi Liu, Ji-Shun Li, Guo-Ding Chen, Yu-Jun Xue, Ming-De Duan (2010). Multibody Dynamics Modeling of Friction Winder Systems Using Absolute Nodal Coordination Formulation.DOI
215. X. Ku, Ji-Shun Li, Wei Ma, Hong-Biao Han (2010). Measuring and Monitoring System of Weighing Process for Liquid Material.DOI
216. Yi Liu, Guo-Ding Chen, Ji-Shun Li, Yu-Jun Xue (2010). Flexible Multibody Simulation Approach in the Analysis of Friction Winder.DOI
217. Yu-Jun Xue, Chen Shen, Ji-Shun Li, Yi Liu (2010). Oxidation and Wear Resistance of Ni-Y2O3-ZrO2 Nanocomposite Coating Prepared by Ultrasonic Electrodeposition.DOI
218. Yu-Jun Xue, Ji-Shun Li, Wei Ma, Ming-De Duan, Ming-Ming Lan (2010). Fabrication and Wear Resistance of Ni-CeO2 Nanocomposite Coatings by Electrodeposition under Ultrasound Condition.DOI
219. Wei Ma, Yong Chao Lu, Yonggang Liu, Jishun Li, Yu Xue (2010). Influence of Sandwich Damping on the Loss Factor of Multi-Plies Bellows. Applied Mechanics and Materials.DOI
220. Wei Ma, Yongjian Yu, Yonggang Liu, Jishun Li, Yu Xue (2010). Simulation and Experiment on the Vibration Performance of Pre-Loaded Multi-Plies Bellows. Key engineering materials.DOI
221. 王继光，马伟，李济顺（2009）. 三叶风能传递腔式风轮性能试验与分析. 《河南科技大学学报(自然科学版)》.
222. 薛玉君，兰明明，李济顺，刘红彬，马伟（2009）. 超声-脉冲电沉积制备Ni-CeO2纳米复合材料. 《特种铸造及有色合金》.
223. 谢微华，李济顺（2009）. 基于FPGA的嵌入式PLC微处理器设计. 《河南科技大学学报(自然科学版)》.
224. 王磊，李济顺，韩红彪（2009）. PLC软冗余系统在石化加热炉中的应用. 《河南科技大学学报(自然科学版)》.
225. 兰明明，薛玉君，段明德，马伟，李济顺（2009）. 脉冲电铸制备纳米CeO2增强镍基复合材料. 《机械工程材料》.
226. 常志勇，李济顺，韩红彪（2009）. 基于单总线协议的多点测温技术及应用. 《河南科技大学学报(自然科学版)》.
227. 李济顺，薛玉君，兰明明，刘义，余永健（2009）. 超声波对Ni-CeO2纳米复合电铸层微观结构和性能的影响. 《中国有色金属学报》.
228. Qing-Wei Dong, Wei Ma, Ji-Shun Li, Yu-Jun Xue, Xian-Zhao Jia (2009). Application Research on Multi-agent Distributed Technology in Instrument Products Collaborative Design System. International Conference on Digital Enterprise Technology.DOI
229. Xian-Qing Lei, Ji-Shun Li, Yu-Jun Xue, Ming-De Duan, Wei Ma (2009). Roundness error evaluation based on polar mesh searching algorithm. International Symposium on Mechatronics and its Applications.DOI
230. Yi Liu, Guo-Ding Chen, Ji-Shun Li, Yu-Jun Xue (2009). Study on Drive Characteristic of Multi–Rope Friction Winder Using Functional Virtual Prototyping.DOI
231. Yu-Jun Xue, Ming-Ming Lan, Ji-Shun Li, Hong-Bin Liu, Wei Ma（2009）. NI-CEO_2ナノ複合材料を,超音波-電着によって調製した。【JST・京大機械翻訳】.
232. X. Ku, Yu-Jun Xue, Ji-Shun Li, Wei Ma (2009). Digital manufacturing technology for spring coiling. IEEE International Conference on Computer-Aided Industrial Design & Conceptual Design.DOI
233. Lun Li, Ji-Shun Li, Wei Ma, Yu-Jun Xue, Yong-Gang Liu (2009). Virtual Prototype of the Tunnel Boring Machine and Movement Simulation in DIVISION MOCKUP2000i2. International Conference on Digital Enterprise Technology.DOI
234. X.-H. Shi, H. Shao, Ji-Shun Li (2009). A Quantitative Strategy for Tool Wear Monitoring in Turning. International Conference on Digital Enterprise Technology.DOI
235. Li Hang, Song-Ge Yang, Yu-Jun Xue, He-Lei Zhu, Ji-Shun Li, Yang Li (2009). Method of three-point for measurement of micro-table position and posture. International Conference on Electronic Measurement and Instruments.DOI
236. Hong-Biao Han, Ji-Shun Li, Bing Wang, Dandan Liu, Y. Liu (2009). Movable Instantaneous Impact Pressure Testing Device.DOI
237. X. Ku, Wei Ma, Ling Ling, Ji-Shun Li (2009). Integrated Automation System for Weighing and Blending Process Based on DCS.DOI
238. Wei Ma, Ji-Guang Wang, Ji-Shun Li, Yong-Gang Liu (2009). Investigation of Cavity Wind Rotor with Three Blades Vertical Axis.DOI
239. Jishun Li (2009). Two-step spatial circle fitting method based on projection. Journal of Engineering Design.
240. Ji-Shun Li, X. Ku, Yu-Jun Xue, Xian-Zhao Jia (2009). CBR-Based Process Planning for Special-Type Spring Coiling.DOI
241. Hang Li, He-Lei Zhu, Ji-Shun Li, Song-Ge Yang, Yu-Jun Xue (2009). Micro-table posture measuring based on binocular vision. International Conference on Electronic Measurement and Instruments.DOI
242. Jishun Li (2009). Nano-CeO_2/Ni Composites Prepared by Pulse Electroforming. Materials for Mechanical Engineering.
243. 夏永彬，李济顺，黄晓东（2008）. S3C44B0X的数据采集设备驱动的研究与实现. 《河南科技大学学报(自然科学版)》.
244. 薛玉君，李济顺，李航，马伟，孙勇（2008）. 超声场中镍-氧化铈纳米复合材料的电铸工艺. 《特种铸造及有色合金》.
245. Jian Han, Shu-Shang Zhao, Ji-Shun Li, Hang Li (2008). Research on developed parallel two-wheeled robot and its control system. 2008 IEEE International Conference on Automation and Logistics.DOI
246. Ji-Shun Li, Zhi-qiang Guo, Zhili Zhou, Wei Ma (2008). Study on fuel economy operating modes of tractor equipped with CVT. 2008 34th Annual Conference of IEEE Industrial Electronics.DOI
247. 雷贤卿，李济顺，薛玉君，马伟，崔凤奎，胡东方 (2008). A New Algorithm of Roundness Error Separation Technique of Three-point Method. Defence Technology.
248. Yi Liu, Ji-Shun Li, Guo-Ding Chen (2008). Finite Element Simulation Analysis on the Shield Cutterhead.
249. Ji-Shun Li (2008). Research of Resource Mode Estimation for Networked Manufacturing.
250. Hang Li, Fang Wang, Ji-Shun Li, Yu-Jun Xue (2008). Method of three-point for measurement error of microstructure table three dimension motion based on machine vision. 2008 IEEE International Conference on Industrial Technology.DOI
251. Xiao-Liang Wang, Hang Li, Ji-Shun Li, Yu-Jun Xue, Sang-Ang Yao (2008). Kinematics Analysis for a 4-RPR Parallel Mechanism of the Milling of the Big Radius Spherical Fiducial Surface. International Conference on Intelligent Robotics and Applications.DOI
252. 孙勇，薛玉君，李济顺，马伟，李航（2007）. 超声电铸镍-氧化铈纳米复合材料的研究. 《机械科学与技术》.
253. 雷贤卿，李言，周彦伟，李济顺，薛玉君（2007）. 3点法圆度误差分离技术的新算法. 《兵工学报》.
254. 张海英，吴明远，石松民，马伟，李济顺，姚超峰（2007）. 拖拉机覆盖件模具型腔RE/CAD/CAM的一体化设计与制造. 《拖拉机与农用运输车》.
255. Ji-Shun Li (2007). NC Improvement on Profiling System of Super-finishing Guiding Roller Grinder S7030.
256. Wei-Min Pan, Ji-Shun Li, Y. Lei (2007). Digital Precision Measuring of Spiral Bevel Gear Based on CAD/CAM/CMM.DOI
257. Ji-Shun Li, Ku Xiangchen, Ma Wei, Hang Li (2007). Integrated system of digital coiling for spring. Annual Conference of the IEEE Industrial Electronics Society.DOI
258. 孙勇，薛玉君，李济顺，吴明远（2006）. 电铸Ni-CeO2纳米复合材料的工艺研究. 《特种铸造及有色合金》.
259. 库祥臣，王润孝，李济顺，贾现召（2006）. 基于CBR的异形弹簧数控卷绕工艺自动生成. 《组合机床与自动化加工技术》.
260. 张晓东，张江锋，李济顺（2006）. 轴承沟道磨床的砂轮自动平衡方法及系统的实现. 《组合机床与自动化加工技术》.
261. 孙勇，薛玉君，李济顺，吴明远（2006）. 电沉积耐磨减摩纳米复合镀层的研究进展. 《表面技术》.
262. 雷贤卿，李言，李济顺，周彦伟，段明德（2006）. 截面最小二乘圆心位置的余弦回归提取法. 《河南科技大学学报(自然科学版)》.
263. 李济顺，姜存学，梁春安，库祥成（2006）. 用Visual C++实现的嵌入式PLC梯形图编辑软件. 《河南科技大学学报(自然科学版)》.
264. 汪国云，李济顺（2006）. 基于轮廓的物体识别与定位方法. 《河南科技大学学报(自然科学版)》.
265. 库祥臣，王润孝，李济顺，韩建海（2006）. 面向数控加工的复杂异形弹簧三维建模. 《制造技术与机床》.
266. 刘伟，刘延斌，李济顺（2006）. 波纹管的阻尼系数的估计方法和精度分析. 《中国机械工程》.
267. Xian-Qing Lei, Ji-Shun Li, Yan Li, Yan-Wei Zhou, Yu-Jun Xue, Xiao-Zhong Ren (2006). Separating and Reconstructing Techniques of Cylindricity Error by Three-point Method. International Symposium on Mechatronics and its Applications.DOI
268. Yu-Jun Xue, Ji-Shun Li, Wei Ma, Yan-Wei Zhou, Ming-De Duan (2006). Sliding wear behaviors of electrodeposited nickel composite coatings containing micrometer and nanometer La2O3 particles.DOI
269. X. Ku, Run-Xiao Wang, Ji-Shun Li, Dong-Bo Wang (2006). The Spatial Shape Representation and 3D Modeling of Special-Shape Spring. PROgraming LAnguages for MAnufacTuring.DOI
270. Xian-Qing Lei, Yan-Wei Zhou, Yan Li, Ji-Shun Li, F. Cui (2006). Precision Measurement of Parallelism Error Between Machine Guideway and the Axis of Spindle.
271. Ji-Shun Li (2006). Application of RE in the Development of Tractor Covering Parts.
272. Yu-Jun Xue, Xian-Zhao Jia, Yan-Wei Zhou, Wei Ma, Ji-Shun Li (2006). Tribological performance of Ni–CeO2 composite coatings by electrodeposition.DOI
273. 潘为民，闫光荣，雷毅，李济顺（2006）. 基于CAD/CAM/CMM集成的螺旋锥齿轮数字化测量及其关键技术. 《航空制造技术》.
274. Ji-Shun Li (2006). Dynamic Balancing Method and Instrument System of the Emery Wheel of Groove Grinder.
275. Wei-Min Pan, Yi Lei, Ji-Shun Li (2006). Control of Analogue Scan Probe in CMM Inspect of Spiral Bevel Gear. International Symposium on Mechatronics and its Applications.DOI
276. 杨丙乾，李航，雷贤卿，李济顺（2005）. 基于运动轨迹测量的加工中心几何误差控制. 《河南科技大学学报(自然科学版)》.
277. 黄晓东，王恒迪，李济顺（2005）. 基于TCP/IP的串行设备网络通信. 《河南科技大学学报(自然科学版)》.
278. 韩红彪，段明德，崔琦，李济顺（2005）. 散热器曲线焊缝五枪自动焊工艺. 《焊接学报》.
279. 李剑锋，张洛平，李济顺，李聚波（2005）. 基于PC的开放式数控系统研究. 《机械工程师》.
280. Ji-Shun Li (2005). Simple NC Restructuring for Y3150E Model Hobbing Machine.
281. 杨建玺，崔凤奎，王晓强，张丰收，邓宏，李济顺（2004）. 冷滚轧滚轮设计理论及实验修正. 《中国机械工程》.
282. 刘建亭，沈云波，李济顺（2004）. 机床误差正交光栅检测及补偿的研究. 《组合机床与自动化加工技术》.
283. 左敏柱，尚振东，李济顺，武充沛（2004）. 高准确度标准电能表不同测量方式的测量误差. 《河南科技大学学报(自然科学版)》.
284. 韩红彪，林青松，李济顺，王雅生（2004）. 散热器堵座双枪自动焊设备的研制. 《焊接技术》.
285. 杨晓英，马伟，李济顺，王会良（2004）. 现代工业工程教学实验系统的规划设计. 《河南科技大学学报(自然科学版)》.
286. Jishun Li (2004). Movement Gait Harmony Control for Hexapod Robot. Mechanical & Electrical Engineering Magazine.
287. 沈云波，刘建亭，李济顺（2003）. 机床误差的正交光栅检测及分离. 《河南科技大学学报(自然科学版)》.
288. 武莉，李济顺，张洛平（2003）. 基于USB接口的数据采集系统. 《河南科技大学学报(自然科学版)》.
289. Wei-Jie Xia, Zhi-Ming Wu, Ji-Shun Li, Luo-Ping Zhang (2003). A new method of error compensation for numerical control system.DOI
290. 勾富华，李济顺，张洛平，夏蔚军（2002）. 圆柱度高精度测量系统的设计. 《河南科技大学学报(自然科学版)》.
291. Ji-Shun Li (2002). A Study of Feature Matching Based on FFT in the Measurement of Chip Spacing.
292. Ji-Shun Li, Luo-Ping Zhang, Zhi-Min Ni, M. Hong (2002). Actual profile reconstruction of a precision cylinder based on error separation technique. Optics East.DOI
293. M. Hong, Yuan-Lei Wei, Zi-Jun Li, Ji-Shun Li (2000). Mapping matrices and weight function in high-precision EST of flatness by optical probe. Optics and Optoelectronic Inspection and Control.DOI
294. 于军，李济顺，王晓强（1998）. 转子振动幅相特征精确的提取方法. 《河南科技大学学报(自然科学版)》.